• 한국해양공학회지
• /
• 제14권2호
• /
• pp.112-116
• /
• 2000

To determine a preliminary hull form with a minimum viscous resistance this study considers the systematic variations of full form and calculations of the viscous resistance for varied hull forms. A preliminary hull form can be determined from a parametric study of viscous resistance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.785-794
• /
• 2015

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

• 대한조선학회지
• /
• 제19권2호
• /
• pp.19-25
• /
• 1982

Several formulae have been proposed to estimate the viscous resistance of ships by wake surveys. Both the total head and the velocity should be measured. The integration of he total head loss shows over estimations of the resistance by about 10%. Therefore measurements of the velocity are required, which need much more works. A simple method is suggested in this paper to take accout of the velocity-defect from the measured total head. It gives reasonable estimations of the viscous resistance within the experimental accuracy. Experimental data of a low-drag body of revolution in the wind-tunnel and Series 60 model, CB=0.6 in the tank are used to verify the suggested formula.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1106-1111
• /
• 2014

본 연구는 Hydrofoil 선박용 POD의 형상변화에 따른 압력분포 특성을 파악하기 위하여 CFD기법을 적용하여 수행하였다. POD 단면의 기본형상을 원점(상단)으로 하여 x축 방향으로 0cm(원본형상)에서 8cm까지 절단했을 때, 점성저항은 조금씩 감소하였으나, 압력저항은 조금씩 증가하는 결과를 얻었다. 하지만 동일한 조건하에서 9cm를 절단했을 경우에는 점성저항은 증가하고, 압력저항은 감소하는 경향을 보였다. 결론적으로, 압력저항이 점성저항에 비해 POD형상의 압력분포 특성에 많은 영향을 미친다는 것과 9cm를 절단한 근처에서 전체저항이 감소한다는 결론을 얻었다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.57-62
• /
• 2005

STX shipbuilding Co,. Ltd. has been developed a hull form and propeller of medium class container vessel. The present paper deals with numerical calculations and experimental tests for the investigation of wave resistance, viscous resistance and propeller. The characteristics of wave resistance and self propulsion factors are varied in order to find an optimized hull form. The measured results have been compared with computed results by 'WAVIS' The prediction of the caviation occurrence was predicted by 'Opti-pro' and measurement is performed in KRISO.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.683-691
• /
• 2018

Numerical simulations of turbulent flows around KCS have been performed to study the sensitivity of ship resistance to wall-adjacent grids and disclose the influence of near-wall treatment on the sensitivity of ship resistance. The resistance coefficients of viscous and pressure forces were compared when using realizable $k-{\varepsilon}$ and SST $k-{\omega}$ turbulence models in structured and unstructured grids, respectively. The calculation of friction velocity was found to be mainly responsible for the reduction of viscous and total resistances when the height of wall-adjacent cells increased. Since the assumption of equilibrium state between turbulent production and dissipation was not met in a bulbous bow, it was more reasonable to iteratively calculate the friction velocity from empirical laws of the wall for near-wall treatment rather than explicitly estimate it from the turbulent kinetic energy.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.138-146
• /
• 1999

The viscous flow around a ship hull is calculated by the use of RANS(Reynolds-averaged Navier-Stokes) solver. Reynolds stresses are midelled by using the k-${epsilon}$ turbulence model and the law is applied near the body. Body fitted corrdinates are introduced for the treatment of the complex boundary of the ship hull form and the governing equations in the physical domain transformed into ones in the computational domain. The transformed equations are numerically solved by an employment of FVM(Finite Volume Method). SIMPLE(Semi-Implicit Pressure Linked Equation) method is adopted in the calculation of pressure and the solution of the sidcretized equation is obtained by the line-by-line method with the use of TDMA(Tri-Diagonal Matrix Algorithme). To assure the proprietty of this computing method, HSVA tanker and Dyne hull are calculated ar both model and ship scale Reynolds number. Their reaults of pressure distributions on fore and aft body, axial velocity contours and transverse velocity velocity vectors and viscous resistance coefficients are compared with other's experiments and calculations.

• 한국해양공학회지
• /
• 제11권2호
• /
• pp.100-106
• /
• 1997

Viscous flow around an actual ship is calculated by an use of RANS(Reynolds-averaged Navier-Stokes) solver. Reynolds stress is modelled by using k-$\varepsilon$ turbulence model and the law of wall is applied near the body. Body fitted coordinates are introduced for the treatment of the complex boundary of the ship hull form. The transformed equations in the computational domain are numerically solved by an employment of FVM(Finite Volume Method). SIMPLE(Semi-Implcit Pressure Linked Equation) method is adopted in the calculation of pressure and the solution of the disssssssscretized equation is obtained by the line-by-line method with the use of TDMA(Tri-Diagonal Matrix Algorithme). The subject ship model of actual calculation is 4,410 TEU class container carrier. For 4 geosim models the calculated viscous resistancce values are compared with the model test results and analyzed on their componentss. The resistance performance of an actual ship is predicted very resonably, so this mothod may be utilized as a design tool of hull form.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.590-598
• /
• 1988

본 연구에서는 난류유동이론을 적용하여 2차원 스크린의 후류에 관한 유동특 성을 연구하였다. 이를 위해 적합한 난류모델 및 스크린의 존재를 고려한 수치해석 방법을 연구하였다. 스크린의 저항이 커서 스크린 하류유동이 역류가 되는 경우도 포함하였다.

• 수산해양기술연구
• /
• 제19권2호
• /
• pp.125-129
• /
• 1983

이상의 연구로부터 결론은 아래와 같다. 1. 점성저항과 조파저항 성분의 상호작용에 대한 어떤 측정 근거를 산출하였다. 2. Froude의 가정 ∂C sub(t)/∂R-dC sub(f)/∂R은 부정확하다는 것을 밝혀둔다. 3. 거친 표면을 가지는 모형선에 대한, 상응하는 결과는, 완전히 다른 결론을 산출할 것이라고 기대한다. 4. 다른 기하학적 동일선의 결과에 기본 마찰곡선을 적용하여 이와 같은 연구를 반복하는 것이 가능하다는 것을 남겨둔다.