• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.86-91
• /
• 1995

In order to expand the utility of alginic acid in the food industry, we have investigated to prepare low viscous alginic acid using a method for degradation of alginic acid with the enzyme system of Vibrio sp. AL-145. The enzyme showed maximum activity at pH 8.0 and $37^{\circ}C$, and was stable in the pH range 7.5 to 8.5 and at temperature up to $30^{\circ}C$, and 0.5M NaCl needed for the enzyme activity. The viscosity of alginic acid decreased with the reaction time courses regardless of alginic acid and enzyme concentration, and 90% of viscosity decreased with 60 min of reaction time, but the changes of reducing sugar not exhibited. The soluble concentration of partially degradated alginic acid(PDA) in water was about 10%(w/v), and adsorption capacity of $Ca^{2+}$ ion increased with increasing the concentration of PDA. The alcohol concentration on precipitation of PDA was higher than Na-alginic acid.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.303-310
• /
• 2002

An optimization for fermentation processes to make lactic acid juice with extracts from apples, carrots, celery, watercress, jujube and lycii (3 : 3 : 1 : 1/2 : 1 : 1/2) using co-cultures of Leuconostoc mesenteroides, Lactococcus lactis and Lactobacillus cellobiosus isolated from Dongchimi had been investigated on the emphasis of composition of sugars and sodium chloride at various temperatures. The concentration of sugars less than 25% and salt less than 0.8% did not affect remarkably the cell growth of lactic acid bacteria and acid formation during fermentation. The fermenting juice showed increases in the population of lactic acid bacteria and acidity, and decreases in population of coliform bacteria and sugar concentration with high cultural temperature. At $25^{\circ}C$ viscous substance was not formed as it had at $15^{\circ}C$. The optimum composition, based on the sensory evaluation, was determined to be oligosaccharide and 0.2% for sodium chloride. It took 3 days to produce the most preferable juice of pH 3.62 at $25^{\circ}C$. At the optimal state the fermented juice showed viable cell counts (cfu/mL) of exponential numbers 8 for lactic acid bacteria and 4 for yeast. Coliform bacteria which had been $5.6{\times}10^2\;cfu/mL$ at the beginning of fermentation were not detected.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.326-331
• /
• 1989

Superconducting fiber of high Tc $YBa_2Cu_3O_{7-{\sigma}}$ was successfully prepared by the sol-gel method. The stoichiometric mixture of Y, Ba and Cu nitrates was dissolved in water, to which citric acid solution was added. Then ammonium hydroxide was added to the mixture in order to increase the pH to a value between 5.8 and 6.2. The mixture was heated carefully to form a homogeneous colloid sol at 358 K. The solution was viscous enough to draw a long gel fiber, which was then heated at 1223K for 8 hrs. under oxygen partial pressure of $Po_2$ = 1 atm., cooled slowly and annealed at 723K for 13 hrs.. The reacted superconducting sample maintained a fiber form with some shrinkage of its volume. The superconducting transition temperatures (Tc, onset and Tc, offset) of $YBa_2Cu_3O_{7-{\sigma}}$ have been determined to be approximately 95K and 82K, respectively. The superconducting phase was also confirmed by Meissner effect at liquid nitrogen boiling temperature.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.60-68
• /
• 1991

The updated Lagrangian Finite Element Method is introduced to analyse rigid body-fluid impact problem which is characterized by incompressible Navier-Stokes equations and impact-contact conditions between free surface and rigid body. For the convenience of numerical computation, velocity fields are splinted into vicous and pressure parts, and then the governing equations and boundary conditions are decomposed in accordance with the decomposition. However, Viscous stresses acting an the solid boundaries are neglected on the assumption that very small velocity gradients may occur during extremely small time interval of the impact. Four coded quadrilateral elements are used to discretize the space domain and the fully explicit time-marching algorithm is employed with a reasonably small time step. At the beginning of each time step, contact velocity of the rigid body is computed from the momentum balance between the body and the fluid. The velocity field is then computed to satisfy the discretized equations of motions and incompressibility and contact constraints as well as an exact free surface boundary condition. At the end of each time step, the fluid domain is updated from the velocity field. In the present time stepping numerical analysis, behaviour of the free surface near the body can be observed without any difficulty which is very important in the water impact problem. The applicability of the algorithm is illustrated by a wedge type falling body problem. The numerical solutions for time-varying pressure distributions and impact loadings acting ion the surface are obtained.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.659-664
• /
• 2012

The fermentation and quality characteristics of Cheonggukjang with Chinese cabbage, which is produced as a by-product in the kimchi industry, were investigated. Cheonggukjang was prepared with cooked soybean without Chinese cabbage (control), with 10% Chinese cabbage (A10), and with 20% Chinese cabbage (A20), respectively. The A10 and A20 pH values did not show a significant difference compared with the control during fermentation for 72 h. The total aerobes of the Cheonggukjangs reached 8.65 (control), 8.73 (A10), and 9.11 (A20) log CFU/mL after fermentation for 72 h at $37^{\circ}C$, respectively. The numbers of lactic acid bacteria were found to be 5.62 (A10) and 5.87 (A20) log CFU/mL during fermentation for 72 h at $37^{\circ}C$, but lactic acid bacteria were not detected in the control. The amino nitrogen and viscous substance contents of A10 and A20 were lower than those of the control. The total polyphenol contents and DPPH radical scavenging abilities of the tested Cheonggukjang were increased by fermentation. The increasing ratio of polyphenol and the DPPH radical scavenging ability of A10 were higher than those of the control and of A20. The sensory quality of A10 was higher than that of the control and of A20 in taste, color, and overall acceptability.

• Journal of Life Science
• /
• v.23 no.4
• /
• pp.560-568
• /
• 2013

Chungkookjang was fermented by B. subtilis MC31, a ${\gamma}$-amino butyric acid (GABA) producing microorganism. The characteristics of Chungkookjang were investigated while fermenting. Twenty four amino acids were detected in Chungkookjang, leucine was the highest of them all. Total cell populations of B. subtilis MC31 phase were between log $9.52{\pm}0.5$ ~ log $9.049{\pm}0.5$ CFU/g at stationary phase. Contents of moisture, crude ash, crude protein, crude lipid and crude fiber are $61.07{\pm}0.01%$, $1.52{\pm}0.01%$, $17.66{\pm}0.04%$, $8.96{\pm}0.03%$ and 2.61%, respectively. Contents of ammonia type nitrogen, amino type nitrogen and reducing sugar were increased during fermentation at $40^{\circ}C$ for 72 hr, however those of titratable acidity and total sugar were decreased. pH was slowly alkalized during fermentation. Viscous substance and protease contents in Chungkookjang were $4.7{\pm}0.05%$ and $0.519{\pm}7.36$ g/l, apiece. When the fibrin plate and Robbin method for fibrinolytic activity were applied, B. subtilis MC31 showed high activity. These results suggested that B. subtilis MC31 is suitable to be used as a starter to enhance the quality of Chungkookjang.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.299-305
• /
• 2012

Various types of bio wood chip for fermentation-extinction of food waste was investigated by comparing their different pore structure with the performance of weight loss rate and microbial activity. The fermentation-extinction of food waste with bio wood chip was examined by adding 700~1,500g of food waste every day during 15 days to the fermentation-extinction reactor with condition of $30{\sim}50^{\circ}C$ temperature and 30~70% humidity, where 1,500g of bio wood chips were existed. The bio wood chips used in this experiment were categorized into 4 different types; microbial-mixing type(A biochip), macro pore type(B biochip) under $2{\mu}m$ of pore size, micro pore type of wood-chips(C biochip) under $0.1{\mu}m$ of pore size, viscous & sticky type(D biochip). As a result, A, B, C, D bio wood chip exhibited 85%, 63%, 92%, 73% weight loss of food waste with fermentation-extinction. The maximum weight loss of food waste was obtained at the fermentation-extinction experiments by using C bio wood chip. On the other hands, the maximum ratio of ATP to COD and TN was obtained from $3.00{\times}10^{-10}$ and $2.31{\times}10^{-11}$ in the case of C bio wood chip, comparing with other types of bio wood chip. Consequently, the performance of weight loss rate was affected with the micro pore structure of bio wood chip which have an advantage of extensive microbial activity space in the fermentation-extinction of food waste.

• Applied Biological Chemistry
• /
• v.50 no.2
• /
• pp.87-94
• /
• 2007

A bacterium which has high enzymatic activities such as amylase, cellulase and protease was isolated from Korean traditional soybean food, doenjang. The isolated bacterium was identified to Bacillus subtilis HS25 by the test of morphological and biochemical properties according to Bergey's Manual of Systematic Bacteriology and API 50 CHL kit, and by the 16S rDNA sequence. The isolated B. subtilis HS25 had a potent antibacterial activity against food born causative or pathogenic bacteria. B. subtilis HS25 is endospore forming cell and contained flagella and abundant viscous material at the out layer of cell wall. It was rod type bacterium $(0.5{\sim}0.8{\times}3{\sim}5{\mu}m)$ having biochemical characteristics such as gram staining(+), catalase(+), oxidase(-) and hydrolysis of esculin(+). The optimal medium compositions for production of antibacterial substance in the B. subtilis HS25 were 1% of soluble starch, 0.5% of yeast extract, 0.5% of peptone and 0.05% of MgCl$_2{\cdot}6H_{2}O$. The optimum temperature and pH of the growth of the B. subtilis HS25 was 35$^{\circ}C$ and pH 7.5, respectively. The antibacterial activity was more high in neutral to a little alkaline pH (6.5-10.5) than in acidic pH. The optimal shaking speed to grow and to produce antibacterial substance of the B. subtilis HS25 was 160${\sim}$200 rpm. The optimal culture time for antibacterial activities of the bacterium were shown to be in the range of 12-36 hr.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.235-245
• /
• 2008

The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100, Z250, DenFil, Tetric Ceram, ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 mm thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at $25{\circ}C$ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the nonslumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G' but not with the loss tangent. Also, slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1064-1071
• /
• 2015

Viscous fermented red ginseng extracts were dried and coated using a fluidized bed coater to increase convenience and consumer acceptance. The methods for making spherical granules of fermented red ginseng extracts with increasing convenience were established by using indigestible dextrin. Spherical granules of fermented red ginseng extracts with increasing convenience were made by mixing indigestible dextrin at 40% (40% IDD), 50% (50% IDD), and 60% (60% IDD) versus the soluble solid content of fermented red ginseng extracts. Spherical granules of fermented red ginseng extracts showed less angle of repose than powder of fermented red ginseng extracts. This means that spherical granules of fermented red ginseng extracts had good fluency with increased convenience. The more indigestible dextrin showed higher yields. Although 50% IDD showed less yield than 60% IDD, 50% IDD was the best mixing ratio for making spherical granules of fermented red ginseng extracts, as fermented red ginseng extracts is known as a healthy food. The optimized operation conditions of the fluidized bed coater for making 50% IDD were feeding rate 0.54 mL/min, atomization air pressure 2.15 bar, and product temperature $83.03^{\circ}C$.