• Applied Biological Chemistry
• /
• v.39 no.3
• /
• pp.165-171
• /
• 1996

The rheological properties of biopolymers produced by Bacillus sp. K-1 and its mutant strains(KM-21, KM-83) were studied. Apparent viscosity of biopolymers decreased as rising the temperature. The biopolymer produced by KM-21 strain showed 1.7 times low viscosity, 2.7 times low viscosity by K-1 and 1.9 times low viscosity by KM-83 at $80^{\circ}C$ compared with at $20^{\circ}C$ respectively. The viscosity of biopolymer solution also increased with increasing the polymer concentration and showed pseudoplastic characteristics which is high temperature dependency in all concentration. The change of the biopolymer viscosity on the pH showed the highest value at the pH 7.0 and it showed lower at acidic condition than at alkaline condition comparatively.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.386-392
• /
• 1995

The high viscous ${\gamma}$-polyglutamic acid(${\gamma}$-PGA) from alkalophilic Alcaligenes sp. was purified and its solution property was investigated. The intrinsic viscosities for Na+ form and H+ form of ${\gamma}$-PGA were 31.1 and 0.38d$\ell$/g, respectively. The viscosity of H+-PGA was not influenced by pH or salts while that of Na+-PGA was influenced. The intrinsic viscosity of Na+-PGA solution decreased remarkably at the alkaline or acidic pH and showed the sharp decrease when salts were added. ${\gamma}$-PGA exhibited the property of the polyelectrolyte showing the .sharp decrease of intrinsic viscosity by the addition of NaCl, and intrinsic viscosity of dilute solution with the low concentration of NaCl was exponentially dependent on temperature and its temperature dependency increased with increasing NaCl concentration. The chain stiffness, coil overlap parameter and critical concentration of Na+-PGA were 0.08, 5.25 and 0.07g/d$\ell$, respectively.

• Applied Biological Chemistry
• /
• v.35 no.2
• /
• pp.69-75
• /
• 1992

Viscosity changes of acidified milk at the various pH $ranges(5.2{\sim}4.2)$was measured as a function of temperature. The rate and extent of acid-induced coagulation of milk protein were monitored by turbidity changes as a function of temperature, preheating and salt. Relative viscosities of acidified milk were also measured. The coagulation of casein occurred in a specific pH range and was accompanied by a sharp increase in viscosity at pH of $5.0{\sim}5.2$, depending on the heating temperatures. Onset pH of coagulation and maximum coagulation rate were enhanced by increasing temperatures and preheating process and reduced by addition of salt. Relative viscosity of acidified milk was reversed at the same conditions, reflecting the size of casein coagulum formed was related to the coagulation rate.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.903-911
• /
• 2020

The purpose of this study was to compare the physicochemical properties of sausage manufactured with carp (Carassius carassius) muscle and pork. Sausages were prepared using either 100% pork sausage (P10), a mixture of 50% pork and 50% carp muscle (P5C5), or 100% carp muscle (C10). The quality of the sausage emulsion was determined by analyzing approximate composition, pH, instrumental color, cooking yield, water holding capacity (WHC), viscosity, and texture profile analysis (TPA). Moisture content of cooked C10 was significantly higher than that of P10 or P5C5 (p < 0.05); however, protein content of cooked P10 was significantly higher than that of C10 (p < 0.05). The pH of uncooked and cooked C10 was significantly higher than that of P10 and P5C5 (p < 0.05). The cooking yield, WHC, and texture profile analysis of C10 were higher than those of P10 and P5C5 (p < 0.05). In addition, the viscosity of uncooked C10 was higher than that of P10 and P5C5. These results suggest that carp muscle can enhance sausage quality with respect to pH, WHC, cooking yield, viscosity, and TPA.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.1
• /
• pp.52-61
• /
• 1997

This study was aimed to decrease AOX(Adsorbed Organic Halide Compounds) by applying bleaching methods of A(HNO$_3$ ＋ NaNO$_2$) and $D^{(H/L)}$(dual pH chlorine dioxide bleaching) to conventional OCEDED bleaching stages. And so we investigate the effects of NSA treatment and the influence of production rate of ion species in chlorine dioxide and pulp mixtures according to various pH as well as dual pH on pulp bleaching. Finally the effects of AOC_DED^{(H/L)}ED^{(H/L)}$ bleaching stage were investigated by measuring AOX, brightness, kappa number and viscosity of pulps. A stage was treated by using 4% $HNO_3$ and 0.05~2.0% $NaNO_2$ on pulp and $D^{(H/L)}$ stage was like that pulp mixed with chlorine dioxide solution was adjusted at pH 7.0 and reacted in pulp cosistency 3%, S~20min, $70^{\circ}C$, and then successively for 160~175min at pH 4.0. It was found that suitable $NaNO_2$ addition rate was at 0.6% where the brigtness of pulp was most higher and pulp viscosity was not decreased much. Chlorate ($CIO_3$) was decreased according to pH increase but chlorite($CIO_2$) was highly decreased according to pH increase. And chloride was slightly increased with pH increase. The applying of A and D^{(H/L)}$ bleaching stages to some various multiple bleaching stages ($AOC_DED^{(H/L)}/EopD^{(H/L)} etc.$) had good results that brightness was increased more 2~3% ISO than conventional method(OCEDEopD), but viscosity was dropped by only 1~2cps.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.4
• /
• pp.619-624
• /
• 1995

Sesame protein concentrate(SPC) was prepared from defatted sesame flour(DSF) at several different pH(2.0, 7.0, 9.0, 11.0) for protein extraction. Some of their functional properties were determined in order to compare the effects of pH during preparation of concentrates. Compared with DSF, nitrogen solubility was markedly improved in all SPC, and SPC extracted at pH 11.0 showed the highest solubility at all pH leaves examined. Fatabsorption was increased in all SPC prepared, but water absorption was decreased as the extraction pH of protein increased. The emulsifying properteis and foaming properties of SPC were remarkably higher than DSF. As the extraction pH of protein was increased, the emulsion activity was also increased, but emulsion stability was decreased. SPC extracted at pH 7.0 showed the highest foaming capacity on the other hand, the highest foaming stability was shown in SPC extracted at pH 2.0. As the protein extraction pH increased, the viscosity of the protein solution was increased. SPC extracted at pH 11.0 showed highest viscosity at all protein concentrations tested.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.122-129
• /
• 2012

In this study, environmental problems(i.e., pH elevation and $Cr^{6+}$ detection) occurred by using the cement grout made from CA(calcium aluminate) were evaluated using viscosity agents(MC, chelate polymer). Ordinary portland cement and blaste-furnace slag cement were used by main materials and ACC(blended mixture of calcium aluminate) were used by accelerator for hardening of grout. In addition, viscosity agents were used for preventing pH elevation and heavy metal detection from grouting materials. From the results, it was noted that when chelate polymer was used, pH elevation and $Cr^{6+}$ detection were minimized. However, other cases showed higher pH elevation and $Cr^{6+}$ detection. At test 1 day, $Cr^{6+}$ detection with age presented over 97% of total value and, after that, additional increase was not distinct. As a result of this study, it was acknowledged that, to control pH elevation and heavy-metal (like $Cr^{6+}$) detection, the usage of BSC and chelate polymer is a very useful fact.

• Korean Journal of Poultry Science
• /
• v.43 no.1
• /
• pp.31-38
• /
• 2016

Consumers demand fresh and high-quality eggs. Egg quality may be represented by shell color, shell weight, egg weight, shell thickness, shell density, albumen height, yolk color, albumen pH and viscosity. Various factors such as strain, age of hen, storage temperature, humidity, the presence of $CO_2$ and storage time affect egg quality. Therefore, we investigated the effects of storage time and temperature on egg quality to define the freshness of Korean market eggs. A total of 1,800 eggs were used for this experiment and were separated into 45 treatments with 40 eggs in each. The treatments were consisted of 15 storage periods (2 d to 30 d) and 3 storage temperatures ($2^{\circ}C$, $12^{\circ}C$, $25^{\circ}C$). Each egg was weighed and broken, and the height of the thick albumen, Haugh units (HU), egg shell color and yolk color were measured by a QCM+system. We also observed the physiochemical properties of eggs such as yolk pH, albumen pH and albumen viscosity. The egg weight, shell weight, albumen height, HU and albumen viscosity significantly decreased with increasing storage time and temperature. However, the albumen and yolk pH significantly increased with increasing storage period and temperature. The interaction effects between the storage period and temperature were significant for shell weight, shell density, egg weight, albumen height, HU, yolk color, yolk pH, albumen pH and albumen viscosity. In the analysis of the correlation with egg quality, the storage temperature exhibited a higher correlation coefficient than the storage period. In conclusion, storage time and temperature are the major factors affecting egg quality, but the storage temperature is a more sensitive determinant of egg quality deterioration compared with the storage period.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.594-597
• /
• 2004

Effects of various levels and molecular weights (MWs) of chitooligosaccharides and chitosan with pork salt-soluble protein (SSP) on pH, moisture (%), viscosity, and hardness of protein-chitosan mixtures were determined in a model study. Mixtures of 0.15, 0.3, and 0.45% chitosan at various MWs (Low, 1.5 kDa; Medium, 30-50 kDa; High, 200 kDa) were dissolved in 3% SSP solution for measurement of pH and viscosity at $20^{\circ}C$. pH value increased with addition of 0.45% low MW of chitooligosacchearides into SSP (p<0.05), whereas decreased with addition of 0.45% medium MW and 0.3% or higher level of high MW chitosan. Viscosity increased with addition of more than 0.3% either medium or high MW chitosan (p<0.05), as compared to mixture with low MW chitolligosaccharide and control (p<0.05). No differences in gel pH, moisture, and hardness values were observed among treatments (p>0.05). Further study will be performed to evaluate rheological properties actual meat products with various levels and MWs of chitosan.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.366-371
• /
• 2011

Viscosity is critically important for bulgogi sauce. However, exposure to irradiation may decrease the rheological properties of bulgogi sauce. This study was conducted to compare the effects of gamma irradiation (0-9 kGy) on viscosity, molecular weight, pH, reducing end level, and water solubility of xanthan gum, guar gum, and locust bean gum as thickening agents/stabilizers in bulgogi sauce. The physicochemical properties of all samples changed (p<0.05) from 3965 to 0 cP (viscosity), from 6048 to 28 kDa (molecular weight), from 5.79 to 4.62 (pH), from 0.13 mg/mL to 1.72 mg/mL (reducing end level), and from 6% to 87% (water solubility) following gamma irradiation. Viscosity after irradiation was most stable (p<0.05) in xanthan gum (from 1249 to 92 cP) compared with guar gum (from 3965 to 0 cP) and locust bean gum (from 1631 to 0 cP). The sensory properties (texture and taste) of bulgogi sauce prepared with xanthan gum (1%, w/w) were highly maintained (about 7.0-5.0) after high-dose irradiation of up to 40 kGy. These results indicate that xanthan gum can be effectively used as a thickening agent/stabilizer in bulgogi sauce, which had low viscosity after irradiation.