• Journal of Mechanical Science and Technology
• /
• v.19 no.3
• /
• pp.870-876
• /
• 2005

It seems very difficult to comply with upcoming stringent emission standards in vehicles. To develop low emission engines, better quality of automotive fuels must be achieved. Since sulfur contents in diesel fuels are transformed to sulfate-laden particulate matters as a catalyst is applied, it is necessary to provide low sulfur fuels before any Pt-based oxidation catalysts are applied. In general, flash point, distillation $90\%$ and cetane index are improved but viscosity can be worse in the process of desulfurization of diesel fuel. Excessive reduction of sulfur may cause to degrade viscosity of fuels and engine performance in fuel injection systems. This research focused on the performance of an 11,000 cc diesel engine and emission characteristics by the introduction of ULSD, bio-diesel and a diesel oxidation catalyst, where the bio-diesel was used to improve viscosity of fuels in fuel injection systems as fuel additives or alternative fuels.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.611-614
• /
• 2003

The rheological properties of exopolysaccharide, p-KG03, produced by marine microalgae Gyrodinium impudicum strain KG03 had been studied. The intrinsic viscosity of this p-KG03 was calculated to 65.22 and 50.75 $d{\ell}/g$ using Huggins and Kramer equations (xanthan gum 24.41 and 24.03). Aqueous dispersions at p-KG03 concentrations ranging from 0.1 to 1.0 % (w/w) showed marked shear-thinning properties as Power-Law behavior. In aqueous dispersions of p-KG03 1.0 %, consistency index (K) and flow behavior index (n) were 2,172 and 0.52. The apparent viscosity and the influence of shear rate on different conditions as p-KG03 concentrations, pH, NaCl, $CaCl_2$ and temperature in aqueous solutions were measured. And p-KG03 had mixed with aqueous solutions of xanthan gum and gellan gum, and invested the change of mixed aqueous solution behavior.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.23-32
• /
• 2015

In this study, chemical and physical changes of dissolving pulps which have similar viscosity by dry milling and fractionation were investigated. We used two types of dissolving pulp made from wood and cotton linter fiber, respectively. Dry milling was executed by knife cutter and pulp powders were fractionated by sieve shaker into 4 grades. We analyzed fiber properties, crystallinity index, viscosity, molecular weight of pulp sheet and powders. It was found that poly-dispersity index of cotton linter pulp was smaller than that of wood pulp, meaning that cotton pulp has more narrow molecular weight distribution. It was assumed that these were related to exposure times to chemical treatment which cut cellulose chains not evenly. At least 4 times of chemical treatments for wood pulp were executed and only two times of chemical treatments for cotton linter pulp were done. After dry milling average molecular weight and crystallinity index of cotton linter pulp powders were reduced and these were related to fines content and shape of pulp powders.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.620-625
• /
• 1993

This experiment was carried out to predict the sensory properties of yogurt by instrumental methodology. Sensory attributes such as viscosity, mouth-feel, taste and quality were investigated. Instrumental parameters were measured with refractometer, viscometer, consistometer and rheometer. Sensory data showed that viscosity of peach yogurt was higher than that of strawberry and tropical-fruit-mixed (TFM) yogurts (p<.05). All instrumental parameters of peach yogurt were higher than those of strawberry and TFM yogurts, except cohesiveness and elasticity (p<.05). Viscosity measured by panelists was significantly correlated with instrumental viscosity, consistency, hardness, adhesiveness and gumminess in the fruit yogurts (p<.05). But mouth-feel and quality of yogurts showed poor relationships with instrumental parameters. The effective instrumental parameters for predicting sensory viscosity ($Y_{1}$) of yogurts were consistency ($X_{1}$), viscosity ($X_{2}$) and cohesiveness ($X_{3}$). And those for predicting mouth-feel ($Y_{2}$) were consistency. The estimated regression equations were as follows; $Y_{1}=4.968-0.0486X_{1}+0.00012X_{2}+0.0348X_{3},\;Y_{2}=5.701+0.0154X_{1}$.

• Tribology and Lubricants
• /
• v.28 no.2
• /
• pp.81-92
• /
• 2012

To product multi-grade oil like engine oil, a sort of mineral base oil is mixed with a fundamental additive liquid package and a polymer liquid as viscosity index improver in order to improve the lubricating property of oil. That is, engine oil is the mixture of more than two fluids. In this paper, it will be systematically organized the governing equation describing non-Newtonian thermo-hydrodynamic lubrication related with the mixture of incompressible fluids based on the principle of continuum mechanics. Then, in order to find how the thermal analysis effect on the bearing performance lubricated with the mixture of multi-fluids, it will be compared to the performances between the mixture of each liquid to be blended and multi-grade engine oil as a single fluid in a high speed journal bearing. It is found that, in the case of lower viscosity oil, the difference of pressure distribution between the above two cases turns out to be existed, even if the load capacity is same level.

• Journal of the Korean Chemical Society
• /
• v.56 no.4
• /
• pp.424-430
• /
• 2012

Densities, viscosities, refractive indices and speed of sounds of the binary mixtures of Acetophenone with Ethylchloroacetate were measured over the entire mole fractions at (303.15, 313.15 and 323.15) K. From these experimental results, excess molar volume $V^E$, viscosity deviation ${\Delta}{\eta}$, refractive index deviation ${\Delta}n_D$, deviations in speed of sound ${\Delta}u$, deviations in isentropic compressibility ${\Delta}k_s$ and excess intermolecular free length ${\Delta}L_f$ were calculated. The viscosity data have been correlated with the equations of Grunberg and Nissan, Hind et al., Tamura and Kurata, Katti and Chaudri, Sedgwick, Krishnan-Laddha and McAllister. The thermo physical properties under study were fit to the Jouyban-Acree model. The excess values were correlated using Redlich-Kister polynomial equation to obtain their coefficients and standard deviations. It was found that in all cases, the data obtained fitted with the values correlated by the corresponding models very well. The results are interpreted in terms of molecular interactions occurring in the solution.

• Korean journal of food and cookery science
• /
• v.20 no.4
• /
• pp.387-395
• /
• 2004

The effect of commercial Doenjangs (Korean soybean pastes) on sponge cake making was studied. When Doenjang was added to e99 foams at levels of 5, 10, 15 and 20%, there were no big differences in viscosity or stability of egg foams up to 15%, and thus in cake volume index, compared to those of control (without Doenjang). In the results of preference rank test, cake with 10% Doenjang was preferred to the other cakes. Therefore, it was decided that the addition of 10% Doenjang was suitable for sponge cake making. When seven commercial Doenjang products were used at 10%, there were differences in physical and sensory properties. The decreased viscosity of egg foams reduced their stability and so decreased the quality of the sponge cakes with low volume index and low texture scores. The use of Doenjangs improved the flavor of sponge cake and so countervailed the undesirable egg flavor. Especially, “C” Doenjang product, which increased the viscosity and stability of egg foams, produced good foaming ability and the highest physical and sensory quality, thus the higher overall acceptable scores than the control. It was probably due to its high amount of protein hydrolysate above 10-KDa. Consequently, the suitable amount of Doenjang was fixed at 10% and “C” Doenjang product was chosen as the best among the commercial products for sponge cake making.

• Korean journal of food and cookery science
• /
• v.23 no.3 s.99
• /
• pp.314-320
• /
• 2007

The objective of this study was to investigate the effect of grain size on the physicochemical properties of rice porridge. Here, the grain size of the rice was classified as whole grain, half grain, and flour by traditional Korean cooking methods. The viscosity of the rice flour porridge was highest for the among the three different grain size porridges. In the amylographs, the increase in viscosity for the whole grain porridge was higher than that of the rice flour porridge during cooling. The soluble solid and reducing sugar contents of the rice porridges increased according to the rice grain size, while the blue value decreased. The SDI (starch digestion index) increased according to the rice grain size. The RDS (rapidly digestible starch) was highest while the SDS (slowly digestible starch) the lowest in the rice flour porridge. The morphologies of the rice porridges were examined by SEM and showed a smoother surface and more exudated gelatinized granules in the rice flour than in the whole grain rice porridge. In conclusion, rice porridges made from the smallest possible grain size such as flour may be helpful for people with weaker digestive systems such as infants, the elderly, and hospital patients.

• Journal of the Korean Society of Food Culture
• /
• v.37 no.6
• /
• pp.510-518
• /
• 2022

This study compares the quality characteristics of Jeung-pyun prepared by supplementing with rice mash of various cultivars. Results showed high contents of crude protein and crude ash in Saeilmi. The highest and lowest amylose contents were obtained in Goami4 and Baekjinju, respectively. Saeilmi had the highest water absorption index (WAI) of rice flour, whereas the highest water-soluble index (WSI) was obtained in Baekokchal. Maximum viscosity, minimum viscosity, and breakdown were high in Baekjinju, and high cooling viscosity and setback levels were determined in Goami4. The sugar content, total free sugar, and pH of the rice mash were highest in Baekjinju. The highest volume of Jeung-pyun was obtained with Saeilmi supplementation, whereas the specific volume was highest in Baekokchal. Evaluation of L, a, and b color values of Jeung-pyun revealed the maximum L value in Saeilmi, a value in Goami4, and b value in Baekjinju. The physical properties of Jeung-pyun were lower in all supplemented groups compared to the control group for hardness, adhesiveness, and chewiness. The lowest chewiness was obtained in Baekokchal-supplemented Jeung-pyun. We conclude that supplementation with different varieties of rice affects the quality characteristics of Jeung-pyun, which are important factors for manufacturing processed foods.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.339-340
• /
• 2002

Natural castor oil was chemically reconstructed to extend the carbon chains by means of iso-reaction so as to improve the rheological behavior, by way of increasing the viscosity index and decreasing the pour point. The rheological and tribological characteristics of the reconstructed castor oil were comparatively investigated with those of the natural castor oil and several other vegetable oils and a mineral oil. The friction and wear test results on a four-ball machine indicate that the chemically reconstructed castor oil has considerably improved rheological and tribological properties as compared with the natural castor oil. It shows a greatly increase viscosity index and largely decreased pour point, which makes it applicable to low temperature lubrication. The chemically reconstructed castor oil even shows better tribological behavior than pentaerythritol ester or di-iso-capryl sebacate. However, it is still needed to increase the oxidation stability of the reconstructed castor oil.