• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.378-385
• /
• 2001

This paper deals with the effect of an adjacent viscous fluid on the torsional vibration of a circular rod excited by a transducer at one end. The interaction between the torsional vibration of the rod and the fluid has been studied theoretically and expressed in terms of the mechanical impedance. The theoretically-obtained trend that the mechanical impedance is proportional to the square root of the viscosity times density of the fluid has been confirmed by the impedance measurement. The paper demonstrates that a torsionally-vibrating rod can be used as a sensor measuring the viscosity of a fluid.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.2 s.11
• /
• pp.21-24
• /
• 2005

Ink-jetting characteristics of pulse width and pulse amplitude for a piezoelectric ink jet printer driver have been mapped with various polymer EL ink. In this study, the jetting characteristics have been classified into 4 regime; no Jetting, unstable jetting, stable jetting, and spraying, and the importance of fluid viscosity on the scope of the stable jetting regime has been emphasized. The relation between jetting speed and the width and amplitude of driving signal has also been investigated and the effect of the speed on the jetting characteristics has been discussed.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.273-280
• /
• 2016

In this paper, the peristaltic flow of Psedoplastic fluid with variable viscosity in an asymmetric channel is examined. The bionic effects by means of magnetohydrodynamics (MHD) are taken into account. The assumptions of long wave length and low Reynolds number are taken into account. The basic equations governing the flow are first reduced to a set of ordinary differential equation by using appropriate transformation for variables and then solve by using perturbation method. The effect of physical parameters on the pressure rise, velocity and pressure gradient are illustrated graphically. The trapping phenomenon is analyzed through stream lines. A suitable comparison has also been made as a limiting case of the considered problem.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.153-160
• /
• 1999

Water soluble hydroxyalkyl methycellulose ethers are used in a variety of applications incluing building industry as a supplementary agent used for incresing adhesives, water retention capacity, workability and viscosity modify. Water retention capacity(WRC) is the capability to contain water in the ploymer chain under condition of being mixed with cement. In general, the WRC is affected by the viscosity, the adding amount, the particle size, the rate of dissolving and the amount of substituted chemical in cellulose ethers. In the other words, WRC is increased as higher the viscosity, more adding amount, finer the particle size and longer the dissolving time of cellulose ethers. This thesis investigated each factor that effect the WRC, particularly the relation between degree of substitution(DS), molar of substitution(MS) and WRC. It is observed that WRC is not nearly affected by DS of cellulose ethers, but is changes proportionally as MS increases in the narrow range(0.10~2.25)

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.771-776
• /
• 1993

Aqueous extraction of sea tangle at the temperature range of 60~10$0^{\circ}C$ was studied for temperature effects on soluble solids and protein yields, amino nitrogen, turbidity and viscosity of extracts. The solids and protein yield were increased as the temperature increased and most of solids and protein were extracted during 1 hour. The supernatant ratio after centrifugation showed significantly low for the extraction at 6$0^{\circ}C$. More temperature effects were found on turbidity and viscosity than yields. A significantly higher total amino nitrogen contents was obtained from higher temperature at initial stage of extraction and then the differences of them became to be narrow as the extraction prolonged further. The low values of 24.1% solids and 13.5% protein yields after 2 hours of extraction at 10$0^{\circ}C$ indicated that most of solids in sea tangle are insouble.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.77-83
• /
• 2007

This study was carried out to examine the optimum culture condition for the production of cellulose from Saprolegnia ferax and its physical characteristics. Conclusions obtained from the results of this study were as follows: In producing the cellulose from S. ferex, optimal pH and temperature were 7.0 and $26{\sim}30^{\circ}C$ with a maximum of $26^{\circ}C$, respectively. And, optimal culture period was 11days. WHC and OHC of biocellulose were 3.2(25.04 g/g) times and 3.5(25.75 g/g) times higher than those of commercial ${\alpha}-cellulose$(7.57, 7.25 g/g) respectively. The viscosity of biocellulose is lower than that of commercial ${\alpha}-cellulose$. And the effect of rpm on the viscosity of biocellulose was more than on the that of ${\alpha}-cellulose$.

• Tribology and Lubricants
• /
• v.17 no.4
• /
• pp.335-340
• /
• 2001

It was reviewed that the kinds of lubricating oil, viscosity, temperature and strength of materials affected the wear of the surface heat treatment. When lubricants is used under severe running conditions, their tribological characteristics are very important. We have studied the lubricating oil viscosity, kinds of additives and their amounts, and lubricating oil temperatures were changed. In order to study the effect of oil temperature on the wear of the surface, the temperature of the oil was changed for the same sample. It was shown from the test results that wear is not greatly affected by the amount of ZnDTP (Zinc dialkyl dithio phosphate) antiwear agent, but EP (Extreme pressure) additives are less effective against wear than ZnDTP additives. The viscosity of lubricating oil and its temperature greatly affect the wear of the surface. Combining all the wear data with those of the surface strength, it was observed that the higher the load, the lower the scratch of wear, and also in the case of the same running load, the lower the wear, the longer the life of the surface strength.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.35-41
• /
• 2014

PURPOSES : Surface treatment is a favorable method in the pavement preventive maintenance. This study (Part I) aimed to develop the low viscosity filling material for waterproof characteristics and high penetrable and weather resistance, and a series of companion study (Part II) presents the coating characteristics and performance analysis using field and lab tests. METHODS : Hydrophobic characteristics of the advanced surface treatment material are observed and measured the filling depth and the permeability for sand and asphalt pavement specimen using the water absorption test and permeability test, X-RAY CT test. Color difference for the weather resistance using ultraviolet ray accelerated weathering test is compared with asphalt pavement specimens. RESULTS : The developed material shows the decreased water absorption and increased impermeable effect because of the hydrophobic characteristics. It is found that the filling depth is about 6mm and weather resistance is better than asphalt pavement specimen. CONCLUSIONS : The advanced hydrophobic - low viscosity filling treatment material is developed in this study (Part I) to improve the waterproof characteristics and high filling capacity and weather resistance for the pavement preventive maintenance.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.81-87
• /
• 2015

Soda-AQ pulp made from sugarcane bagasse (SCB) were bleached in element chlorine free (ECF) sequence. To reduce chlorine dioxide use, final peroxide bleaching was introduced. Prior to peroxide bleaching, different chelating chemicals were applied for comparative analysis in ISO brightness and viscosity. When using equal total chlorine dioxide usage (4.5%), bleached SCB pulp using chelate and hydrogen peroxide (DEDQP) was reached 86.8% (DTPA), 86.4% (EDTA) ISO brightness, whereas bleached pulp using only hydrogen peroxide (DEDP) reached at 81.2% ISO brightness. Viscosity of DEDQP bleached pulp was 25.6 cPs (DTPA), 25.2 cPs (EDTA), And DEDP bleached pulp was shown 18.0 cPs viscosity. Decreasing of transition metal by chelate process led to improvements in final brightness along with higher viscosity. Due to EDTA is 5-7 times cheaper than DTPA, EDTA is recommended as chelating chemical prior to peroxide bleaching.

• Korea-Australia Rheology Journal
• /
• v.12 no.2
• /
• pp.93-100
• /
• 2000

The interactions between methylated $\beta$-cyclodextrin (CD) and hydrophobically modified alkali-soluble associative polymers (HASE) were examined by a rheological technique. The effect of "capping" of hydrophobes by methylated $\beta$-cyclodextrin on the viscosity and modulus was evaluated. Model HASE polymers with $C_1$to $C_{20}$ alkyl hydrophobic groups ethoxylated with~10 moles of ethylene-oxide (EO 10) and at concentrations up to 3 wt% were examined. With the addition of methylated $\beta$-CD, the steady shear viscosity profiles shift from a Newtonian profile to one that display a shear-thinning characteristic. Significant "capping" of the hydrophobes occurs for HASE polymers with $C_{l2}$, $C_{16}$ and $C_{20}$ hydrophobes as reflected by the large reduction in the viscosity. However, the steady shear viscosity remains constant when the concentration of $\beta$-CD exceeds 1 wt%, suggesting that $\beta$-CD is not able to fully encapsulate the hydrophobes of the HASE polymer. The temperature variation plots indicate that the activation energy of the HASE-EO10-$C_{20}$ system and $\beta$-CD is dependent on the magnitude of the applied shear stress. These results further reinforce the hypothesis that $\beta$-CD is not able to completely remove all the hydrophobic associations.phobic associations.