• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.183-190
• /
• 2018

Tilting pad journal bearing is widely used for steam turbines because of its excellent dynamic stability. As the turbine capacity increases, power loss in the bearings becomes a matter of concern. Power loss in tilting pad journal bearings can be reduced by increasing the bearing clearance and reducing the pad arc length. In this study, the tilting pad journal bearing is tested by changing the seal tooth clearance to verify the static characteristics of the bearing. Bearing power loss and bearing metal temperature are evaluated to compare the bearing's performance and reliability for several test cases. The test bearing is a tilting pad journal bearing with 300.62mm inner diameter and 120.00mm active length. The bearing power loss, its metal temperature, and oil film thickness are measured and evaluated based on the rotor's rotational speed, oil flow rate, and bearing load. Test results show that a tilting pad journal bearing with large seal tooth clearance has 40% lower power loss compared with a bearing with a small seal tooth clearance. As the seal tooth clearance is increased, the power loss of the tilting pad journal bearing decreases. However, with respect to the bearing metal temperatures, a detuning point is observed that makes the minimum bearing metal temperature. Moreover, as the seal tooth clearance is increased, the oil film thickness increases due to high viscosity.

• 한국농공학회지
• /
• 제39권4호
• /
• pp.98-105
• /
• 1997

Compacted clay materials are often used to form barriers for waste disposal by means of landfill. The performance of clay barrier depends on its permeability characteristics under the site environments. The study discusses permeability characteristics of 4 types of permeants through a compacted clayey soil. Permeabilities are measured using the modified rigid-wall permeater and with water, PEG, Ethanol, and TCE, ranging 80 to 3.4 of dielectric constants. Results of the study are as follows : 1) Absolute permeabilities of Ethanol and TCE that their dielectric constants are lower than that of water are $K=1.0{\times} 10^{-12} cm^2$, and $5.8{\times} 10^{-12} cm^2$, respectively, that is, 1.67, and 9.67 times of permeability of water, respectively. Absolute permeability and dielectric constant of water are $K=6{\times} 10^{-13} cm^2$, and 80, respectively. 2) Changes in absolute permeability of Ethanol and TCE converge to a constant after 3.5 pore volume of permeant flows through the clay sample. This can be explained that diffuse double layer of clay is no longer reacted with permeants and contracted their pores. However there is no change in absolute permeability when water is used as a per-meant. 3) It is found that absolute permeability in reversely proportional to the value of dielectric constant of the permeants. Change in absolute permeability of the permeants with 40 or over of dielectric constant is not significant. However change in absolute permeability of the permeant with 30 or lower dielectric constant is abruptly increased. 4) A lower absolute permeability of PEG is found because of its high viscosity.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.52-66
• /
• 2003

본 연구에서는 물리, 기계적인 누유 제거방법으로서 부착식의 일종인 드럼식 유회수기를 사용하여 회수조건의 변화에 따른 유회수율을 실험적으로 구하였다. 일반적으로 기계적인 유회수방법에서 문제시되는 것은 고점도 유체에서 유회수가 어렵고, 얇은 유막층에서 회수유중물의 함량이 증가하며, 유회수율이 크게 감소되는 점이다 본 연구에서는 드럼식 유회수기를 이용하여 드럼의 잠긴 깊이에 따른 접촉각, 이송속도, 유막두께 등의 유회수 조건이 유회수율에 미치는 영향을 디젤유를 사용하여 구하고 이를 분석하여 효과적인 유회수 조건을 구하였다. 실험결과 드럼식 유회수기에서 유회수율은 부착유량과 부착유량의 이탈손실에 의하여 영향을 받으며, 부착유량은 잠긴 깊이에 의한 접촉각에 영향을 받는다. 드럼식 유회수기에서의 유회수율은 드럼의 지름에 대한 잠긴 깊이의 비 h/d=0.15(접촉각 45°)에서 가장 효가적인 유회수율을 보이며, 얇은 유막두께에서도 비교적 효과적인 유회수율과 회수효율을 보였다. 또한 이송속도는 최대양정유량을 보이는 임계이송속도를 갖으며, 임계이송속도는 유막두께의 증가에 따라 증가한다.

• 한국식품과학회지
• /
• 제23권6호
• /
• pp.683-688
• /
• 1991

단일축 압출조리기를 이용하여 밀가루를 조리한 후 탁주발효용 기질로 사용하여 알코올 수율을 조사하였다. 또한 스팀가열과 비교하여 압출조리에 의한 밀가루 전분질의 분자구조 변화와 효소 민감성에 대하여 gel permeation chromatography(GPC)와 고유점도 측정으로 평가하였다. 밀가루의 GPC patternd은 스팀 가열이나 방출조리에 의하여 크게 변화되지 않았다. 그러나 ${\alpha}-amylase$를 30분간 처리할 경우 압출성형된 밀가루의 맥아당 생산량이 크게 증가하며 GPC pattern도 크게 변하여 저분자 전분질의 함량이 증가하며 고유점도는 감소하였다. 압출성형된 밀가루로 탁주발효를 한 결과 스팀증자된 밀가루로 탁주발효를 한 경우보다 실험실 규모 실험에서는 26%의 알콜생산 증대가 기록되었으며 공장규모 발효에서는 10% 이상의 알콜생산 증대를 얻을 수 있었다.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.449-454
• /
• 2010

본 논문은 균질유동모델을 적용하여 단열 모세관내 R600a의 유동 특성을 이론적으로 조사하였다. 이 모델은 시뮬레이션 해석에 필요한 기본적인 질량, 에너지, 운동량 방정식에 근거하고 있다. 또한 2개의 마찰인자와 점성계수모델을 이용하여 유동특성을 조사하였다. R600a의 열역학 및 전달 물성치는 EES 물성치 코드를 이용하여 계산하였다. 작동변수들에 대한 기초 설계자료를 제공하고자 단열 모세관내 R600a의 유동 특성을 분석하였다. 본 연구의 작동변수에는 응축온도, 증발온도, 과냉각도, 모세관의 직경이 있다. 주요 결과를 요약하면 다음과 같다. R600a용 단열 모세관내 응축온도, 증발온도, 과냉각도, 관직경은 모세관 전체길이에 영향을 준다. 즉 R600a용 모세관 전체길이는 식(15)와 같은 상관식으로 나타낸다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1561-1567
• /
• 2000

An experiment was conducted to investigate the effect of dietary protein levels and supplementation of phytase and pentosanase in wheat-soybean meal diet on the performance and output of N and P in broilers. Addition of phytase alone or in combination with pentosanase to reduced or control protein diets did not affect average final body weight of mixed sexes. However, addition of phytase and pentosanase in combination to reduced protein diets in male broilers significantly depressed body weights. Intestinal viscosity of 21d broilers was significantly decreased by addition of phytase and pentosanase alone or in combination. Tibia ash content was significantly increased by phytase supplementation. Supplementation of phytase alone and in combination with pentosanase to reduced protein diets significantly decreased P in manure and daily output of P. Daily N output was lowest in the reduced protein diet supplemented with phytase and pentosanase combination. The retention of DM, N and P was highest in the reduced protein diet supplemented with phytase and pentosanase combination. In conclusion, supplementation of phytase alone or in combination with pentosanase to reduced protein diets can decrease output of N and P. But the combination of the enzymes has no beneficial effects on the performance of broilers, especially those on wheat-soybean meal diet with reduced protein level.

• Journal of Applied Biological Chemistry
• /
• 제54권2호
• /
• pp.108-113
• /
• 2011

황백 추출물의 tyrosinase 억제효과를 검토한 결과 60% 에탄올추출물에서 25% 정도의 억제효과를 나타내었으며, melanoma세포(B16F10)에서의 멜라닌 생합성을 측정한 결과 31.2%의 저해활성을 나타내어 멜라닌생성억제효과가 있음을 알 수 있었다. 황백추출물에서 tyrosinase저해 활성물질을 정제하고자 Sephadex LH-20과 MCI-gel CHP-20 open column을 이용하여 용출한 결과 순수하게 정제된 활성물질을 얻을 수 있었으며, 정제물질을 구조 동정한 결과 미백물질은 obacunone으로 동정되었다. 정제된 obacunone은 35.1%의 저해활성을 나타내어 미백 활성이 비교적 우수함을 확인할 수 있었으며, 황백추출물로부터 분리한 미백물질을 이용한 미백 화장품을 제조하여 관능평가를 한 결과 우수한 평가를 받았다. 미백화장품의 안정성 검사를 위해 pH, 점도 및 복소탄성률의 변화를 측정하였으나 저장기간 60일 동안 큰 변화를 나타내지 않았다. 또한 온도변화, 인공 및 자연광에 의한 변화, 온도순환에 의한 변화 및 냉 해동순환(Freeze & Thaw cycling)에 따른 변화들 살펴본 결과 저장 60일 동안 모든 조건에서 상의 분리와 변색, 변취 등의 변화 없이 안정성을 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제33권6호
• /
• pp.553-559
• /
• 2008

이 연구의 목적은 레진 코팅된 표면과 레진인레이 사이의 자가-접착 레진시멘트를 이용한 결합 시 임시가봉제에 따른 미세인장결합강도를 평가하는 것이었다. Caviton(GC, Tokyo, Japan), Provifil(Promedica, Neumunster, Germany), Provifil(Promedica, Neumunster Germany) & petrolatum, and Eugenol-based cement, Tembond(Kerr, Orange. CA, USA) 이 임시가봉재로 사용되었다. Tescera(Bisco, Schamburg IL, USA) 로 제작하였고 자가-접착 레진시멘트인 Rely X unicem (3M, St. Paul. Minn, USA) 를 이용하여 접착하였다. 이후 미세인 장결합강도를 측정하였고 one-way anova 와 Duncan test 를 이용하여 분석하였다.(p<0.05) Caviton 군이 다른 그룹과 비교하여 유의성 있는 차이를 보여주었다(p<0.05). Provifil, Provifil & petrolatum, Tembond 군 등은 상대적으로 낮은 값을 보여주었다.

• Journal of Microbiology and Biotechnology
• /
• 제19권7호
• /
• pp.713-717
• /
• 2009

The dependence of the catalytic properties of horseradish peroxidase on the structural changes of ionic liquids was investigated with two water-miscible ionic liquids, N-butyl-3methypyridinium tetraftuoroborate ([$BMP_y$][$BF_4$]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIM][$MeSO_4$]), each of which shares an anion ($BF_4^-$) or a cation ($BMIM^+$) with 1-butyl-3-methylimidazolium tetraftuoroborate ([BMIM][$BF_4$]), respectively. The oxidation of guaiacol (2-methoxyphenol) with $H_2O_2$was used as a model reaction. In order to minimize the effect of solution viscosity on the kinetic constants of the enzymatic catalysis, the enzymatic reactions for the kinetic study were performed in water-ionic liquid mixtures containing 25% (v/v) ionic liquid at maximum. Similarly to the previously reported results for [BMIM][$BF_4$], as the concentration of [$BMP_y$][$BF_4$] increased, the $K_m$value increased with a decrease in the $k_{cat}$value: the $K_m$value increased markedly from 2.8 mM in 100% water to 12.6 mM in 25% (v/v) ionic liquid, indicating that ionic liquid significantly weakens the binding affinity of guaiacol to the enzyme. On the contrary, [BMIM][$MeSO_4$] decreased the Km value to 1.4 mM in 25% (v/v) ionic liquid. [BMIM][$MeSO_4$] also decreased $k_{cat}$more than 3-folds [from 13.8 $s^{-1}$in 100% water to 4.1 $s^{-1}$in 25% (v/v) ionic liquid]. These results indicate that the ionic liquids interact with the enzyme at the molecular level as well as at a macroscopic thermodynamic scale. Specifically, the anionic component of the ionic liquids influenced the catalysis of horseradish peroxidase in different ways.