• Bulletin of the Korean Chemical Society
• /
• 제4권3호
• /
• pp.128-132
• /
• 1983

The self-diffusion experiment of water was performed across two series of tactic poly(2-hydroxyethyl methacrylate), P(HEMA) membranes prepared by crosslinking with various amount of hexamethylene diisocyanate (HMDIC). The tagging material was tritium hydroxide (THO) and the efflux of THO was counted on a Liquid Scintillation Counter. The transport data of THO show that the permeability decreases as the amount of HMDIC increased from 2.5 to 10 mole % and the self-diffusions coefficient shows a parallel trend with it. The diffusivity data was discussed in terms of the change of water structural orderliness within membranes. Using the relation between viscosities and diffusivities derived from Eyring's absolute rate theory, the corresponding viscosities of water within two series of tactic P(HEMA) membranes were obtained. From this, it is seen that the viscosity of water within tactic P(HEMA) membranes may have the same values with those of supercooling water whose temperature ranges from -28 to -$36^{\circ}C.$.

• Bulletin of the Korean Chemical Society
• /
• 제15권5호
• /
• pp.399-404
• /
• 1994

The non-Newtonian viscosities (the specific or intrinsic viscosities) of poly(L-proline) (PLP, $M_v$=19,000 and 32,000) in various mixed-solvent systems like water-propanol and acetic acid-propanol of varying compositions were measured during the reverse mutarotation (Form II ${\rightarrow}$Form I) by the application of external pressure (up to 4.5 psi). The non-Newtonian viscosity effect was found to be larger in acetic acid-propanol system than in water-propanol system and to somewhat decrease during the reverse mutarotation at a given solvent system. The non-Newtonian viscosity behavior of PLP in aqueous salt ($CaCl_2$) solution was also studied, from which it was found that the degree of the non-Newtonian effect decreased with increasing salt concentration, and increased with increasing PLP molecular weight. These findings could be explained in terms of conformational changes of PLP in solution (like the helix-helix or helix-coil transition) involved.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.84-85
• /
• 2017

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.670-680
• /
• 1994

The thermophysical properties of Non-Newtonian fluid as the function of the temperature and the concentration are needed in many rheological heat transfer and fluid mechanics problems. The present work investigated the effects of the concentration and the temperature on the thermophysical properties of purely-viscous Non-Newtonian fluids such as the isobaric thermal expansion coefficient, density, zero-shear-rate viscosity, and zero-shear-rate dynamic viscosity within the experimental temperature range from $25^{\circ}C$ to $55^{\circ}C$. The densities of the test fluids were determined as the function of the temperature by utilizing a reference density and the least square equation for the measured isobaric thermal expansion coefficient. As the concentration of purely-viscous Non-Newtonian fluid was increased up to 10,000 wppm, the densities were proportionally increased up to 0.4%. The zero-shear-rate viscosities of test fluids were measured before and after the measurements of the first thermal expansion coefficients and the densities of Non-Newtonian fluid. Even though they were changed up to approximately 22% due to thermal aging and cycling, they had no effects on the thermal expansion coefficients and the densities of Non-Newtonian fluid. The zero-shear-rate dynamic viscosities for purely-viscous Non-Newtonian fluids were compared with the values for distilled water. They showed the similar trend with the zero-shear-rate viscosities due to small differences in the densities for both distilled water and purely-viscous Non-Newtonian fluid.

• Korea-Australia Rheology Journal
• /
• 제11권3호
• /
• pp.255-263
• /
• 1999

Blends of two thermotropic liquid crystalline polymers, HX2000 and Vectra A950, were prepared by melt blending. Effects of transesterification on these blends are investigated by comparing properties of the blends with and without the addition of an inhibitor, in terms of blend miscibility and rheology. Both the uninhibited and inhibited blends are found to be largely immiscible with very limited miscibility in HX2000-rich phase. No strong evidence indicates the occurrence of transesterification in the blends in the solid state. Dynamic rheological behaviour, such as shear storage modulus (G') and shear loss modulus (G") as a function of frequency, of the blends are interpreted by a three-zone model. HX2000 shows terminal-zone and plateau-zone behaviour, whilst Vectra A950 shows plateau-zone and transition-zone behaviour. The un- inhibited blends show plateau-zone behaviour up to 50% Vectra A950 content and the inhibited blends show plateau-zone behaviour up to 60% Vectra A950 content. Compositional dependence of the complex viscosities of the uninhibited and inhibited blends displayed positive deviations from additivity, which is a characteristic feature for the immiscible thermoplastic blends. When under steady shear, both the uninhibited and inhibited blends show shear thinning behaviour and their viscosities decrease monotonically with the addition of Vectra A950. Compositional dependence of the steady shear viscosities of the two sets of blends displayed negative deviations from additivity and the uninhibited blends were more viscous than the inhibited blends for the full composition range. Although limited agreement with the Cox-Merz rule is found for the inhibited blends, these two sets of blends, in general, do not follow the rule due to their liquid crystalline order and two-phase morphology. Despite being immiscible blends, transesterification, such as polymerization, in the blends might occur during the rheological characterization, supported by the facts that uninhibited blends show HX2000-dominant behaviour at lower Vectra A950 content and are more viscous than the inhibited blends. The addition of transesterification inhibitor in such blends is advised if only physical mixing is desired.ired.

• KSBB Journal
• /
• 제10권2호
• /
• pp.221-229
• /
• 1995

본 연구에 서는 Zoogloea ramigera에 의한 zooglan 생산에서 탄소원의 영향에 대한 연구를 수행하였다. 탄소원의 농도를 기존의 연구에셔 사용된 $25g/\ell$ 보다 높은 $45g/\ell$ 를 사용한 경우에도 zooglan을 효과 적으로 생산함으로써 유청을 희석시키지 않고 그대로 zooglan 생산에 사용할 수 있는 가능성을 확인하였다. 탄소원이 lactose인 발효배양의 경우 zooglan 생 산량 및 정도가 가장 켰고, glucose, galactose, su­c crose 순이었다. 정제된 zooglan용액(5g/P)의 점도 는 lactose 기질로 생산된 zooglan의 경우 가장 큰 값을 보였고 glucose, galactose 기질의 경우가 가약간 작았으며 sucrose 기질의 경우는 상당히 낮은 값을 보였다. Lactose로의 배양시 발효액 에 상탕량 의 glucose와 galactose가 존재하였지만 이 균주는 세포외로 ${\beta}$-galactosidase를 분비하기보다는 세포내 에 존재한 ${\beta}$-galactosidase에 의해 lactose를 분해 하고 다음 대사과정으로 들어가지 못한 과영의 단당 들이 세포 밖으로 배출된 것으로 판단된다.

• Elastomers and Composites
• /
• 제33권5호
• /
• pp.345-354
• /
• 1998

폴리아미드 수지가 첨가된 PVC졸 실란트의 유변학적 물성에 대해 연구하였다. PVC졸은 디옥틸프탈레이트로 PVC를 가소화시켜 제조된 것이다. 아민가가 달라 점도가 다른 두 종류의 폴리아미드를 사용하였는데 PVC졸의 점도, 틱소트로피 및 비중에 미치는 폴리아미드 수지 종류와 함량의 영향을 고찰하였다. 폴리아미드가 첨가된 PVC졸 실란트의 점도는 폴리아미드의 종류에 관계없이 시간에 따라 증가되었으나 폴리아미드 함량의 영향에 관해서는 아민가가 낮은 폴리아미드 수지 A가 첨가된 PVC졸 실란트의 점도는 폴리아미드 A함량에 따라 증가되고, 반면 아민가가 높은 폴리아미드B가 첨가된 PVC졸 실란트의 점도는 폴리아미드 B함량에 따라 감소되었다. 폴리아미드가 첨가된 PVC졸 실란트의 틱소트로피는 폴리아미드의 종류에 관계없이 그 함량에 따라 다른 거동을 보였다. $45^{\circ}C$의 수조에서 숙성한 후의 폴리아미드가 첨가된 PVC졸 실란트의 점도거동과 충진제인 $CaCO_3$ 함량의 영향도 고찰하였다.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.43-50
• /
• 2021

Pump-cap is a device for discharging the contents stored inside a container to the outside of the container by a simple operation by a certain amount. In particular, in recent years, as the number of cosmetic products made of functional materials has rapidly increased, the development of convenient containers for functional materials is being actively conducted. Among these, there are a growing number of products that show their efficacy only by mixing two components, so the development of a dual pump cap container is necessary. However, the conventional dual pump cap container has a problem in that it is difficult to implement a quantitative discharge as solutions having different viscosities are used. Therefore, in this study, a discharge port of a dual pump cap that can apply an optimal ratio was designed by analyzing the discharge amount of two components with different viscosities through computational fluid dynamics. Since the discharge amount is affected by the size of the discharge port, the higher the viscosity of the solution, the larger the discharge port should be set. Conversely, the lower the viscosity, the smaller the discharge port should be. Through this, it is possible to dispense a fixed amount of a heterogeneous solution by one pumping, and it is determined that the user's convenience will increase.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.566-574
• /
• 2023

Investigating the seepage characteristics of the leaching solution in the ore-bearing layer during the in situ leaching process can be useful for designing the process parameters for the uranium mining well. We prepared leaching solutions of four different viscosities and conducted experiments using a self-developed multifunctional uranium ore seepage test device. The effects of different viscosities of leaching solutions on the seepage characteristics of uranium-bearing sandstones were examined using seepage mechanics, physicochemical seepage theory, and dissolution erosion mechanism. Results indicated that while the seepage characteristics of various viscosities of leaching solutions were the same in rock samples with similar internal pore architectures, there were regular differences between the saturated and the unsaturated stages. In addition, the time required for the specimen to reach saturation varied with the viscosity of the leaching solution. The higher the viscosity of the solution, the slower the seepage flow from the unsaturated stage to the saturated stage. Furthermore, during the saturation stage, the seepage pressure of a leaching solution with a high viscosity was greater than that of a leaching solution with a low viscosity. However, the permeability coefficient of the high viscosity leaching solution was less than that of a low viscosity leaching solution.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2009년도 추계학술발표회 논문집
• /
• pp.77-77
• /
• 2009