• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.471-478
• /
• 2006

This paper presents the results of experimental studies of the mechanical characteristics of the Coil Spring and Viscous Damper system. The Coil Spring and Viscous Damper systems were selected for the isolation of Emergency Diesel Generator (EDG) which is located in Nuclear Power Plant (NPP). The Coil Spring and Viscous Damper systems were developed for, the operating vibration isolation and seismic isolation for scaled Model EDG System. The damping properties of the viscous damper changes as the variation of velocity. As a results, nonlinear damping characteristics of viscous damper system were evaluated.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.4
• /
• pp.237-242
• /
• 2008

The tunic of Styela clava(SCT) consists of a proteoglycan network. Regenerated cellulose films were prepared by solution casting and coagulation of SCT in N-methylmorpholine-N-oxide(NMMO)/$H_2O$(87/13 wt%). The crystalline structure of powdered SCT was primarily that of cellulose I. The crystalline structure of SCT films exhibited a cellulose II structure, similar to that of viscose rayon. Physical characterization of SCT films and fibers revealed an intrinsic viscosity($\eta$) of 6.35 dL/g, average molecular weight($M_w$) of 423,000 g/M, and fiber density of 1.50 $g/cm^3$ with a moisture regain and water absorption of 10.20% and 365%, respectively. The results were similar to those of cellulose films regenerated from wood pulp. Films prepared with 6 wt% SCT exhibited strong tensile strength, high water absorption, and a greater degree of elongation. Scanning electron micrographs(SEM) of film cross-sections showed a layered, sponge-like structure.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.655-674
• /
• 2015

In this paper, a new and simplified method is presented in which the natural frequencies of the uniform and non-uniform beams are calculated through simple mathematical relationships. The various vibration problems such as: Rayleigh beam under variable axial force, axial vibration of a bar with and without end discrete spring, torsional vibration of a bar with an attached mass moment of inertia, flexural vibration of the beam with laterally distributed elastic springs and also flexural vibration of the beam with effects of viscose damping are investigated. The governing differential equations are first obtained and then; according to a harmonic vibration, are converted into single variable equations in terms of location. Through repetitive integrations, the governing equations are converted into weak form integral equations. The mode shape functions of the vibration are approximated using a power series. Substitution of the power series into the integral equations results in a system of linear algebraic equations. The natural frequencies are determined by calculation of a non-trivial solution for system of equations. The efficiency and convergence rate of the current approach are investigated through comparison of the numerical results obtained with those obtained from other published references and results of available finite element software.

• Journal of Plant Biotechnology
• /
• v.3 no.3
• /
• pp.151-157
• /
• 2001

In order to breed barley lines with reduced viscosity of wort, a fractured starch mutant of naked barley cultivar, Nubet, was obtained from the M2 seeds mutated by the diethyl sulfate treatment. Seeds of this fractured starch mutant were opaque and the endosperm consists of angular, irregular and fractured starch. The mutant was caused by single recessive mutation and assigned by the symbol fra. The gene was located on chromosome 4, distal in long arm by linkage recombinations using translocation homozygote lethal test set. The linkage value between the fractured starch mutant and 72-4a, 72-4d were 26.0$\pm$4.9, 34.2$\pm$3.1 percent respectively. In addition to the reduced seed size, fewer kernels per spike and higher tillering ability, lower $\beta$-glucan viscosity and higher lysine content of the grain were associated with this mutant. $\beta$-glucan viscosity of the Nubet grains increased from 3 weeks after anthesis to matury and most of the viscose substances appeared to be stored in the middle of the endosperm tissue. Since the mutant grains showed better milling property as compared to Nubet, it can be used as breeding resources to develope new barley cultivars for maltins and milling purpose.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.213-218
• /
• 2002

Total nitrogen is a major pollutant which mostly causes eutrophication and red tide. Wastewater effluent from printing of cotton-viscose rayon containing high concentrations of total nitrogen can not be effectively treated with a typical biological treatment process. This paper provides a new treatment process and experimental results for the removal of high strength nitrogen from dyeing wastewater. The optimum conditions of air stripping for the removal of total nitrogen include around pH 12, temperature $60^{\circ}C$ with 60 minutes of stripping time. In case of a filtration-air stripping process, an initial level ($500mg/{\ell}$) of total nitrogen was significantly reduced to below $60mg/{\ell}$. Deconite was synthesised for further decomposition of organic nitrogen. Thus, a filtration-decomposition-air stripping process was possibly achieved, by which a high level ($900mg/{\ell}$) of total nitrogen was effectively removed to below $60mg/{\ell}$ P. Finally, a continuous new process for the removal of total nitrogen is proposed and confirmed, based on batch experimental results, and its process validity is further discussed throughout.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.3 s.31
• /
• pp.242-251
• /
• 1989

The purpose of this study was to investigate the changes in easy-care and strength properties of the wet fixation processed viscose rayon fabrics. Rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100, 100/150 and 150/100(g/1). Magnasium chloride was used as a catalyst. Treated fabrics were evaluated by nitrogen content, DP rating, wrinkle recovery angle, breaking strength, tearing strength and abrasion resistance. The properties were compared to the fabrics treated by conventional Pad-Dry-Cure (PDC) method. Wet fixation processed fabrics showed DP ratings of higher than 3 and higher than 275 degrees of wrinkle recovery angles in all the mixed resin concentrations. Wet fixation processed fabrics showed increase in breaking strength and tearing strength but decrease in abrasion resistance. However, the decrease in abrasion resistance was much less than the conventional PDC treated fabrics. The one bath wet fixation processed fabrics showed better physical properties than the two bath processed fabrics in general. The optimum treatment condition was the mixed resin concentration of MF/DMDHEU, 100/100 g/l in one bath wet fixation process.

• Korean Journal of Human Ecology
• /
• v.5 no.2
• /
• pp.123-130
• /
• 1996

The purpose of this study is to examine and to evaluate the wearing performance of pile materials to produce velvet fabrics which have excellent wearing comfort. Acetate velvet, Cuprammonium rayon velvet were combined as textiles for clothing and acetate and viscose rayon were as textiles for lining at the environmental condition of temperature $15^{\circ}C,\;18^{\circ}C,\;21^{\circ}C,\;24^{\circ}C$, relative humidity $50{\pm}5%$ and air velocity 0.25 m/sec. Wearing comfort among 4 materials combinations(Aa, Av, Ra, Rv) was examined and compared. The results are as follows. The investigation of mean skin temperature for environmental temperature and material combinations showed that the mean temperature had a significant difference at the p<0.01 level in accordance with environmental temperature and material combinations.(Aa>Av>Ra>Rv) Moreover, in clothing climate only clothing temperature tended to increase almost linearly but at $24^{\circ}C$ there was no significant difference among textiles for lining compared with the other environmental temperatures. In subjective sensations thermal sensation and comfort sensation showed a significant difference in environmental temperatures and materials.(Aa>Av>Ra>Rv) Though a subject felt warmer, more humid, and more uncomfortable at $24^{\circ}C$ for all of the material combinations comparing with the other temperatures, there was no significant difference in materials.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.660-666
• /
• 2009

Thermoplastic polyurethane elastomer(PU-TPE) and energetic thermoplastic polyurethane Elastomer(E-PU-TPE) were prepared from Hexamethylene diisocyanate(HDI), 1,4-BD/AA ester polyol and glycidyl azide polymer(GAP-2400) as an energetic material by the addition polymerization. The PU-TPE and E-PU-TPE were characterized by FT-IR and GPC. Viscometer, DSC and UTM were used to investigate the viscose behavior with a various solvent, thermal properties and mechanical properties of PU-TPE and E-PU-TPE, which are of potential interest for the development of high performance binder of energetic solid propellants. It was found that $M_w$ of PU-TPE and E-PU-TPEs are over 100,000 and decreased with increase of GAP-2400 contents. $T_m$ and ${\Delta}H$ as thermal properties decreased and also tensile strength and elongation at break as mechanical properties decreased with increase of GAP-2400 contents.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.129-144
• /
• 2004

The modems who lives complicated society, the silence which the Orient thought asserts leads and to get comfortable. It is becoming, the like this social atmosphere will in the interest regarding a manual example and the Orient material, the use of the embroidery textile goods is increasing specially. The purpose of this article is to suggest a model for development of machine embroidery fabric material and highly value added apparel industries. The multi-headed embroidery machine where the application scope is wide from the dissertation, we are requested' NaNa company'. The multiheaded embroidery machine uses TAJIMA TMFD-G620 and SUNSTAR SWF-／B-WD(X) 620-100 the embroidery textile uses the silk, the cotton and the synthesis fertile goods etc 24 type, the embroidery thread Maraton thread(viscose rayon 100％) with used the cord. The 8 Korean motives are made on 23 fabrics, 6 of which are full-sized manufactured one-pieces and the other 17 of which are produced to home interior goods such as curtains or fashion accessories like handbags as simulations. Among the products, the pattern-4-1 and the pattern-4-2 are contracted with local fashion industry, and the pattern-1-1～3 are dealing with other companies in Japan. The computerized machine-embroidering and simulation producing of fashion items are available to reduce the cost in making samples and transfer the old labor ＆ toil-centered industry into the new technique ＆ knowledge centered one.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.79-91
• /
• 1993

The purpose of this study is to prepare the newer, more comfortable of urea-formaldehyde resin finished fabrics. The methods of this study are by making examinations and comparisons the relations between the thickness, fabrics counts, weight, moisture regain and crease recovery of cotton and viscose rayon fabrics caused by condition of urea-formaldehyde resin finishing and warm retaining ability and warm-cool sense. The analytic results of thermal character in state of fabrics material finished with urea-formaldehyde are as follows: 1. The warm retaining ability has no correlation with mixing ratio of resin but the increase of the warm retaining ability has correlation with the increase of concentration of urea-formaldehyde resin. 2. The result pf multiple regression analysis for effect of physical property according to the concentration of resin to the warm retaining ability revealed as below. As the weight, thickness and density increase and moisture regain decreases, the warm retaining ability increases. 3. The qmax value has no correlation with mixing ratio of resin but the increase of the qmax value has correlation with the increase of resin concentration. In the end, the effect of it promotes cool sense. 4. The result of multiple regression analysis for effect of physical property according to the concentration of resin to the qmax value revealed as below. As he weight and thickness increase, the qmax value decrease. But, as the density and crease recovery increase, the qmax value increase.