• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.643-655
• /
• 2020

In the present work, the buckling behavior of a single-layered graphene sheet (SLGS) embedded in visco-Pasternak's medium is studied using nonlocal four-unknown integral model. This model has a displacement field with integral terms which includes the effect of transverse shear deformation without using shear correction factors. The visco-Pasternak's medium is introduced by considering the damping effect to the classical foundation model which modeled by the linear Winkler's coefficient and Pasternak's (shear) foundation coefficient. The SLGS under consideration is subjected to compressive in- plane edge loads per unit length. The influences of many parameters such as nonlocal parameter, geometric ratio, the visco-Pasternak's coefficients, damping parameter, and mode numbers on the buckling response of the SLGSs are studied and discussed.

• 한국응용과학기술학회지
• /
• 제17권3호
• /
• pp.158-166
• /
• 2000

A conductimetric study of foam formed from mixture of the protein, ${\beta}-lactoglobulin$, and the nonioinc surfactant, SML, revealed that their stability was reduced at concentrations of SML in the range $3{\sim}10mM$. The interaction of SML with ${\beta}-lactoglobulin$ was investigated by fluorimetry and a dissociation constant of $0.2{\mu}M$ was calculated for the complex. Surface tension studies confirmed the presence of interaction between the two components and provided evidence for the progressive displacement of ${\beta}-lactogloblin$ from the air/water interface with increasing SML concentration. Experiments using air-suspended microscopic thin liquid films revealed transitions in the chainage characteristics and thickness of the film at SML concentrations below that which resulted in destabilization of the foam. However, measurements of surface mobility of fluorescent-labeled ${\beta}-lactoglobulin$ by a photobleaching method identified that a transition to a mobile system occurred at a SML concentration which correlated with the onset of instability in the disperse phase. The results would indicate that maintenance of the viscoelastic properties of the surface is paramount importance in determining the stability of interfaces comprising mixtures of protein and surfactant.

• 한국수산과학회지
• /
• 제41권6호
• /
• pp.419-426
• /
• 2008

Physicochemical characteristics of gelatin extracted from abdominal skin of yellowfin tuna (Thunnus albacares), were investigated by comparing its proximate composition, pH, amino acid composition, viscoelastic properties, gel strength and SDS-PAGE patterns, with those of bovine and porcine gelatins. The effects of gelatin concentration, maturation time, heat and freeze treatments on the gel strength of yellowfin tuna abdominal skin gelatin were studied. Amounts of $\alpha$-chains, $\beta$- and $\gamma$-components of yellowfin tuna abdominal skin gelatin were higher than those of the two mammailan gelatins. Yellowfin tuna abdominal skin gelatin had the lowest imino acids (proline and hydroxyproline) content, which was consistent with that of other fishes. However, yellowfin tuna abdominal skin gelatin was highest in glycine, alanine, and lysine. The gel strengths of all gelatins were proportional to the concentration of gelatin, but yellowfin tuna abdominal skin gelatin exhibited the greatest gel strength at each concentration. Yellowfin tuna abdominal skin gelatin required a longer maturation time than the two mammalian gelatins to form a firm gel. Higher heating temperature decreased the gel strength of yellow fin tuna abdominal skin gelatin more than in the two mammalian gelatins. Freezing decreased the gel strength of bovine gelatin only slightly, but longer freezing times resulted in greater reductions in gel strength in the yellowfin tuna abdominal skin and porcine gelatins.

• 폴리머
• /
• 제34권5호
• /
• pp.485-489
• /
• 2010

본 연구에서는 폴리락트산(PLA)의 용융강도를 높이기 위하여 PLA에 글리시딜 메타크릴레이트(GMA)를 PLA에 첨가한 후 전자선을 조사하여 PLA를 개질하였다. GMA는 5 phr(parts per hundred parts of resin)로 고정하고 전자선 조사량을 변화시키며 개질 PLA을 제조하였으며, 이후 열적, 유변학적 특성 및 젤화도를 조사하였다. 주파수 0.1 rad/s에서 조사량 300 kGy로 개질된 PLA와 순수 PLA의 유변학적 물성을 서로 비교해보면 복합점도는 약 210배, 탄성률은 약 14500배 상승하는 예외적으로 아주 큰 변화를 보였다. 젤화도의 결과로 조사량 200 kGy 이하로 조사된 시료에서 일어난 분자반응은 가교화 반응보다는 가지화 반응이 우세하다는 것을 알 수 있었다.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.927-936
• /
• 2014

이 논문에서는 복합 적층판의 점진적 파손해석 기법을 개발하고 검증하였다. 강도 및 강성 예측의 정확성을 높이기 위해 재료 비선형 효과와 연속체 손상역학을 동시에 고려하였다. 파손 시작점과 성장을 예측하기 위한 식으로 Hashin의 판별식이 사용되었으며, 파손 모드는 수지인장/전단, 섬유 인장의 2가지 파손모드를 고려하였다. 비선형 탄성 및 점탄성의 구성방정식을 고려한 평형을 계산하기 위해 Newton-Raphson 방법이 사용되었다. 실험을 통해 얻어진 복합재료 단층의 물성을 이용하여 노치가 없는 시편에 인장력을 가했을 때 예상되는 적층복합재의 강도 및 변형률을 예측하였다. 이 경우 선형 물성과 저하계수만을 고려하여 예측된 강성/강도보다 실험결과에 근사하게 나타남을 확인하였다.

• 한국재료학회지
• /
• 제2권3호
• /
• pp.220-227
• /
• 1992

전기유변유체(electrorheological fluid : ERF)는 크기가 $10^{-6}m$정도를 가진 분극성이 강한 입자 분말을 유전유체속에 혼합하여 만든 콜로이드용액으로서 외부전기 장에 의하여 액체상태로부터 겔(gel)상태로 상태변환을 한다. 상태변환과정은 가역과정이며 $10^{-3}$초 정도의 빠른 시간내에 이루어진다. 본 논문에서는 주기적응력이나 주기적 변형이 가해지는 강제진동실험을 통하여 ERF의 점탄성 특성을 조사하였다. 점탄성은 복소수로서 실수부인 동적전단탄성율(storage shear modulus, G')과 허수부인 동적손실율(loss modulus, G")의 합으로 표현된다. 동적전단탄성율은 강제진동의 진폭과 주파수의 함수로 외부전기장에 의하여 크게 변화되었으나 손실계수(loss factor, ${\eta}=G"/G'$)는 진동의 진폭, 진동수 및 외부전기 장에 거의 독립적이었다. 실험(1)은 강제진동의 진폭을 고정하고 진동수를 변화하는 방법(frequency sweep)과 실험(2)는 진동 진폭을 변화시키는 방법(amplitude sweep)으로 실행했다. 본 실험에서는 cornstarch입자를 corn oil에 혼합한 것과 zeolite입자를 silicone oil에 흔합한 콜로이드 용액이 ERF로서 사용되었으며 인가된 전기장은 약$(1~3){\times}10^6V/m$의 직류전기장이 가하여졌다.기장이 가하여졌다.

• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.213-223
• /
• 2009

Taylor-Couette flow (i.e., flow between concentric, rotating cylinders) has long served as a paradigm for studies of hydrodynamic stability. For Newtonian fluids, the rich cascade of transitions from laminar, Couette flow to turbulent flow occurs through a set of well-characterized flow states (Taylor Vortex Flow, wavy Taylor vortices, modulated wavy vortices, etc.) that depend on the Reynolds numbers of both the inner and outer cylinders ($Re_i$ and $Re_o$). While extensive work has been done on (a) the effects of weak viscoelasticity on the first few transitions for $Re_o=0$ and (b) the effects of strong viscoelasticity in the limit of vanishing inertia ($Re_i$ and $Re_o$ both vanishing), the viscoelastic Taylor-Couette problem presents an enormous parameter space, much of which remains completely unexplored. Here we describe our recent experimental efforts to examine the effects of drag reducing polymers on the complete range of flow states observed in the Taylor-Couette problem. Of particular importance in the present work is 1) the rheological characterization of the test solutions via both shear and extensional (CaBER) rheometry, 2) the wide range of parameters examined, including $Re_i$, $Re_o$ and Elasticity number E1, and 3) the use of a consistent, conservative protocol for accessing flow states. We hope that by examining the stability changes for each flow state, we may gain insights into the importance of particular coherent structures in drag reduction, identify simple ways of screening new drag reducing additives, and improve our understanding of the mechanism of drag reduction.

• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.225-233
• /
• 2009

In various attempts to relate the behaviour of highly-elastic liquids in complex flows to their rheometrical behaviour, obvious candidates for study have been the variation of shear viscosity with shear rate, the two normal stress differences $N_1$ and $N_2$, especially $N_1$, and the extensional viscosity $\eta_E$. In this paper, we shall be mainly interested in 'constant-viscosity' Boger fluids, and, accordingly, we shall limit attention to $N_1$ and $\eta_E$. We shall concentrate on two important flows - axisymmetric contraction flow and "splashing" (particularly that which arises when a liquid drop falls onto the tree surface of the same liquid). Modern numerical techniques are employed to provide the theoretical predictions. It is shown that the two obvious manifestations of viscoelastic rheometrical behaviour can sometimes be opposing influences in determining flow characteristics. Specifically, in an axisymmetric contraction flow, high $\eta_E$ can retard the flow, whereas high $N_1$ can have the opposite effect. In the splashing experiment, high $\eta_E$ can certainly reduce the height of the so-called Worthington jet, thus confirming some early suggestions, but, again, other rheometrical influences can also have a role to play and the overall picture may not be as clear as it was once envisaged.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.203-210
• /
• 2005

바인더의 노화로 인한 성능변화는 침입도 또는 점도시험을 실시하여 판정하여왔다. 기존의 시험방법으로 아스팔트 바인더의 점탄성 특성과 실제거동을 평가할 수 없기 때문에 새로운 분석방법이 요구되어 왔다. 본 연구에서는 기존시험 방법을 사용하여 침입도지수와 잔류침입도를 판정하였고, 양방향 반복회전 모드와 일방향 반복회전 모드 시험을 실시하여 단기 노화된 아스팔트 바인더의 유변학적 특성을 분석하였다. 시험결과 단기 노화된 아스팔트 바인더는 시험주기(frequency) 즉, 차량속도의 변화에 따라 서로 다른 복합계수와 위상각을 나타냈으며 단기 노화 전후의 크리프 컴플라이언스 및 전단점도 시험결과에도 영향을 미치는 것으로 나타나서 포장 설계시 이러한 특성이 고려되어야 한다.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.336-340
• /
• 1999

Glasses in the system $CaO-TiO_2-SiO_2-Al_2O_3-ZrO_2-B_2O_3$ were investigated to find the glass seal compositions suitable for use in the planar solid oxide fuel cell (SOFC). Glass-ceramics prepared from the glasses by one-stage heat treatment at $1,000^{\circ}C$ showed various thermal expansion coefficients (i,e., $8.6\times10^{-6^{\circ}}C^{-1}$ to $42.7\times10^{-6^{\circ}}C^{-1}$ in the range 25-$1,000^{\circ}C$) due to the viscoelastic response of glass phase. The average values of contact angles between the zirconia substrate and the glass particles heated at 1,000-$1,200^{\circ}C$ were in the range of $131^{\circ}\pm4^{\circ}$~$137^{\circ}\pm9^{\circ}$, indicating that the glass-ceramic was in partial non-wetting condition with the zirconia substrate. With increasing heat treatment time of glass samples from 0.5 to 24 h at $1,100^{\circ}C$, the DC electrical conductivity of the resultant glass-ceramics decreased from at $800^{\circ}C$. Isothermal hold of the glass sample at $1100^{\circ}C$ for 48h resulted in diffusion of Ca, Si, and Al ions from glass phase into the zirconia substrate through the glass/zirconia bonding interface. Glass phase and diffusion of the moving ion such as $Ca^{2+}$ in glass phase is responsible for the electrical conduction in the glass-ceramics.