• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1456-1469
• /
• 2000

Mechanical behaviors of uniaxially fiber-reinforced metal matrix composites under transverse loading conditions were studied at room and elevated temperatures. A mono-filament composite was selecte d as a representative analysis model with perfectly bonded fiber/matrix interface assumption. The elastic-plastic and visco-plastic models were investigated by both theoretical and numerical methods. The product of triaxiality factor and effective strain as well as stress components and strain energy was obtained as a function of location to estimate the failure sites in fiber-reinforced metal matrix composite. Results showed that fiber/ matrix interfacial debond plays a key role for local failure at the room temperature, while void creation and growth in addition to the interfacial debond are major concerns at the elevated temperature. It was also shown that there would be an optimal diameter of fiber for the strong fiber-reinforced metal matrix composite.

• Geomechanics and Engineering
• /
• 제22권1호
• /
• pp.49-63
• /
• 2020

Studying the critical response characteristics of box culverts with diverse geometrical configurations under seismic excitations is a necessary step to develop a reasonable design method. In this work, a numerical parametric study is conducted on various soil-culvert systems, aiming to highlight the critical difference in the seismic performances between three- and four-sided culverts. Two-dimensional numerical models consider a variety of burial depths, flexibility ratios and foundation widths, assuming a visco-elastic soil condition, which permits to compare with the analytical solutions and previous studies. The results show that flexible three-sided culverts at a shallow depth considerably amplify the spectral acceleration and Arias intensity. Larger racking deformation and rocking rotation are also predicted for the three-sided culverts, but the bottom slab influence decreases with increasing burial depth and foundation width. The bottom slab combined with the burial depth and structural stiffness also significantly influences the magnitude and distribution of the dynamic earth pressure. The findings of this work shed light on the critical role of the bottom slab in the seismic responses of box culverts and may have a certain reference value for the preliminary seismic design using R-F relation.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.691-714
• /
• 2017

Rotating fluid induced vibration and instability of embedded piezoelectric nano-composite separators subjected to magnetic and electric fields is the main contribution of present work. The separator is modeled with cylindrical shell element and the structural damping effects are considered by Kelvin-Voigt model. Single-walled carbon nanotubes (SWCNTs) are used as reinforcement and effective material properties are obtained by mixture rule. The perturbation velocity potential in conjunction with the linearized Bernoulli formula is used for describing the rotating fluid motion. The orthotropic surrounding elastic medium is considered by spring, damper and shear constants. The governing equations are derived on the bases of classical shell theory (CST), first order shear deformation theory (FSDT) and sinusoidal shear deformation theory (SSDT). The nonlinear frequency and critical angular fluid velocity are calculated by differential quadrature method (DQM). The detailed parametric study is conducted, focusing on the combined effects of the external voltage, magnetic field, visco-Pasternak foundation, structural damping and volume percent of SWCNTs on the stability of structure. The numerical results are validated with other published works as well as comparing results obtained by three theories. Numerical results indicate that with increasing volume fraction of SWCNTs, the frequency and critical angular fluid velocity are increased.

• 소음진동
• /
• 제9권2호
• /
• pp.324-330
• /
• 1999

With the increase of track density, high rotational speed and the compatibility for various media such as CD-ROM, CD-R/RW, DVD-ROM/RAM/RW etc. in optical disk drive, the effective anti-vibration design is so crucial for robust operaton. Especailly when the drive is self-excited by unbalanced disk, internal sled base vibration and its external transmission to the case bring about so severe problem. Generally these two consideration points the practical anti-vibration design process to control thses two conflictive properties using finite element analysis. As an example of the design process, Duro 25 and 40 visco-elastic rubber mount was selected and analyzed. The stiffness obtained from FEM rubber model was well matched with the experiments. Also it was confirmed that the internal and external vibration induced from unbalanced disk have good agreement with experimental results. The proposed design process is adopted to the slim-type optical disk drive.

• 한국지반환경공학회 논문집
• /
• 제13권3호
• /
• pp.39-51
• /
• 2012

본 연구에서는 포항이암을 대상으로 다양한 경계조건에서의 creep 시험을 수행하여 이암의 시간의존적 특성을 분석하였으며, 이를 바탕으로 기존에 발표된 creep에 대한 점탄성 모델 및 경험식들과 비교 분석함으로써 더 합리적으로 creep 특성을 평가할 수 있는 방법을 제안하고자 한다. Creep 시험결과를 Griggs(1936), Cottrell(1952) 및 Singh(1975)이 제안한 경험식에 대하여 분석한 결과, 전반적으로 응력수준 및 함수비가 증가할수록 creep 상수가 증가하는 경향을 나타내었다. 또한, Singh의 경험식에 의한 예측치는 실측치와 매우 높은 상관성을 보이고 있는 것을 확인할 수 있었으며, 이로부터 이암의 크리프 거동을 해석함에 있어 Singh의 경험식을 적용함이 바람직할 것으로 판단된다. 유동학적 모델인 Burger 모델에 의한 예측치와 실측치를 비교한 결과, 매우 좋은 일치를 보이고 있음을 알 수 있으며, 이로부터 이암의 크리프 거동을 해석함에 있어 Maxwell 요소와 Kelvin 요소를 직렬로 연결한 Burger 모델을 적용하는 것이 바람직할 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.195-204
• /
• 2004

본 연구에서는 약액주입 사질고결토에 대해 일정재하크리프시험과 반복재하크리프시험을 실시하여 점 탄소성 거동 규명과 크리프예측을 수행하였다. 일정재하크리프 시험결과 총 변형률은 탄성, 소성 그리고 점탄성변형률로 구분되었으며 이러한 변형률은 응력의 증가에 비례하여 증가하였고 회복된 변형률은 제하시간에 무관함을 알았다. 일정재하크리프시험 예측결과 일반화된 모델과 지수함수모델은 시험결과와 잘 일치하였다. 반복재하크리프시험에서 순간회복변형률은 반복횟수에 무관하였고 누적소성 변형률은 반복횟수에 따라 증가하였으며 응력레벨에 비례함을 알 수 있었다. 반복재하크리프시험의 예측결과 첫 사이클에서는 잘 일치하였으나 반복횟수가 증가함에 따라 약간의 오차가 발생되었다.

• 한국지반환경공학회 논문집
• /
• 제14권11호
• /
• pp.33-46
• /
• 2013

본 연구는 최근 기상이변의 영향으로 활발히 진행 중인 댐 치수능력사업의 일환으로, 운영 중인 콘크리트 표면차수벽형석괴댐(Concrete Face Rockfill Dam, CFRD)에서 측정된 계측결과와 시간 의존적 점탄성모델인 Kelvin 모델을 회귀분석하여 댐완공 이후 추가적인 하중증가 없이도 발생되고 있는 크리프(Creep)와 같은 댐의 장기 변형특성을 예측하고, 이와 같은 댐의 변형특성이 댐 제체를 구성하는 재료의 물리적 특성치(E, G, K) 변화에 미치는 영향을 분석하였다. 또한 댐의 장기적인 변형거동에 따른 물리적 특성치 변화가 댐 안정성에 미치는 영향과 댐 증고 시 댐의 장기적인 안정성 확보를 위한 합리적인 댐 안정성 평가방법을 제시하였다.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.35-41
• /
• 2014

PURPOSES : The dynamic modulus for a specimen can be determined by using either the non-destructed or destructed testing method. The Impact Resonance Testing (IRT) is the one of the non-destructed testing methods. The MTS has proved the source credibility and has the disadvantages which indicate the expensive equipment to operate and need a lot of manpower to manufacture the specimens because of the low repeatability with an experiment. To overcome these shortcomings from MTS, the objective of this paper is to compare the dynamic modulus obtained from IRT with MTS result and prove the source credibility. METHODS : The dynamic modulus obtained from IRT could be determined by using the Resonance Frequency (RF) from the Frequency Response Function (FRF) that derived from the Fourier Transform based on the Frequency Analysis of the Digital Signal Processing (DSP)(S. O. Oyadigi; 1985). The RF values are verified from the Coherence Function (CF). To estimate the error, the Root Mean Squared Error (RMSE) method could be used. RESULTS : The dynamic modulus data obtained from IRT have the maximum error of 8%, and RMSE of 2,000MPa compared to the dynamic modulus measured by the Dynamic Modulus Testing (DMT) of MTS testing machine. CONCLUSIONS : The IRT testing method needs the prediction model of the dynamic modulus for a Linear Visco-Elastic (LVE) specimen to improve the suitability.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.1001-1025
• /
• 2016

Building structures generally have inherent low damping capability and hence are vulnerable to seismic excitations. Control devices therefore play a useful role in providing safety to building structures subject to seismic events. In recent years semi-active dampers have gained considerable attention as structural control devices in the building construction industry. Magneto-rheological (MR) damper, a type of semi-active damper has proven to be effective in seismic mitigation of building structures. MR dampers contain a controllable MR fluid whose rheological properties vary rapidly with the applied magnetic field. Although some research has been carried out on the use of MR dampers in building structures, optimal design of MR damper and combined use of MR and passive dampers for real scale buildings has hardly been investigated. This paper investigates the use of MR dampers and incorporating MR-passive damper combinations in building structures in order to achieve acceptable levels of seismic performance. In order to do so, it first develops the MR damper model by integrating control algorithms commonly used in MR damper modelling. The developed MR damper is then integrated in to the seismically excited structure as a time domain function. Linear and nonlinear structure models are evaluated in real time scenarios. Analyses are conducted to investigate the influence of location and number of devices on the seismic performance of the building structure. The findings of this paper provide information towards the design and construction of earthquake safe buildings with optimally employed MR dampers and MR-passive damper combinations.

• 한국지반공학회논문집
• /
• 제24권5호
• /
• pp.107-115
• /
• 2008

본 연구는 1차압밀 중의 크리프의 영향과 Yin이 제안한 탄-점-소성 모델에 대한 적용성을 검토하였다. 탄성모델을 이용한 일반적인 압밀이론은, 1차압밀 과정을 표현할 수 있으나 2차압밀을 표현할 수 없다. 이러한 결과는 2차압축을 표현할 수 있는 점성에 기인하며, 때로는 Ladd 등(1977)이 제안한 가정 A 및 B와 같은 스케일효과(실험실 공시체와 현장조건 사이의 점토층 두께의 차이)와 관련되어진다. 통상적으로 1차압밀 중의 크리프의 존재는 많은 연구자에 의해 확인되어졌으며, 가정 B가 잘 맞는 것으로 되어있다. 한편, 대형압밀시험을 통해 가정 A와 B의 중간적인 특성이 Aboshi(1973)에 의한 가정 C로써 제안되어졌다. 본 연구에서는 1차압밀 중의 침하-시간관계에 대한 크리프의 영향을 명백히 하기 위해, peat와 점토에 대해 분할형 압밀시험기를 이용하여 가정 B의 압밀시험을 행하였다. 그리고 Yin의 탄-점-소성 모델을 이용하여 실험결과를 해석하였다. 얻어진 결과는 다음과 같다. 1차압밀 종료시에 분할 공시체의 압축은 과잉간극수압 소산속도의 차이에 의해 동일하지 않았다. 또한 분할형 압밀시험기에 의해 측정된 평균변형률과 Yin의 EVP 모델을 이용한 해석치는 잘 일치하였다. 그러나 과잉간극수압의 소산에 대해서는 측정치가 Yin 모델에 비해 빨리 소산되었다.