• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.1055-1061
• /
• 2011

In this study, main parameters: aperture, first bend and second bend which express a structure of ear canal are extracted in order to modeling and manufacture the ready-made ear shells of hearing aids. The proposed parameter extraction method consists of 2 important algorithms, aperture detection and feature detection. In the aperture detection algorithm, aperture of 3-D scanned virtual ear impression and parameters relating to ear shell of hearing aid are determined. The feature detection algorithm detects first bend, second bend, and related parameters. Through these two algorithms, parameters for aperture, first bend, and second bend are extracted to model the ready-made ear shell of hearing aid. The values of these extracted parameters from 36 people's right ear impression are analyzed and measured statistically. As a result of the analysis, it has been found that it is possible to classify ready-made ear shell parameters by age and size. The ready-made ear shell parameters are classified 3-size for 20 years old and 2-size for 60 years olde. Using 3D rhino program, virtual ready-made ear shell is reconstructed by parameters of every type, and simulated to model it. A final product was produced by transferring simulation result with rapid prototyping system. The modeled ready-made ear shell is evaluated with the objective and subjective method. Objective method is the comparison volume ratio and overlapped volume ratio of ear impression from randomly chosen 18 people and ready-made ear shell. And subjective method is that the final product of ready-made ear shell is used by users and the satisfaction number drawn from well fitting and comfortable testing was evaluated. In the result of the evaluation, it has been found that volume ration is 70%, big and middle size ready-made ear shell products are possible, and the satisfaction number is high.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.15-25
• /
• 1989

This paper presents the results of the numerical analysis on the behavior of cable-stayed bridge considering geometric nonlinearity of cables. Finite element method is used and geometric nonlinearities are considered on the analysis of cable-stayed bridge. The governing equilibrium equations are derived by the principle of virtual work, and modified Newton-Raphson method and Newmark-${\beta}$ method are employed in response calculations. The validity of this study is demonstrated by comparing the examples with analytical results by other method and testing results.

• Advances in aircraft and spacecraft science
• /
• v.3 no.3
• /
• pp.317-330
• /
• 2016

Nowadays, the interest of aerospace and automotive industries on virtual testing of medium-frequency vibrational behavior of shallow shell structures is growing. The development of software capable of predicting the vibrational response in such frequency range is still an open question because classical methods (i.e., FEM, SEA) are not fully suitable for the medium-frequency bandwidth. In this context the Variational Theory of Complex Rays (VTCR) is taking place as an ad-hoc technique to address medium-frequency problems. It is a Trefftz method based on a weak variational formulation. It allows great flexibility because any shape function that satisfies the governing equations can be used. This work further develops such theory. In particular, orthotropic materials are introduced in the VTCR formulation for shallow shell structures. A significant numerical example is proposed to show the strategy.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.185.2-185.2
• /
• 2003

The typical approach of virtual screening is to prepare a 3D database and dock each member to the receptor, and carry out a post-analysis to make a final selection of compounds to be tested. The biological test of these compounds leads to 'hit'. The size of the 3D database is rate-determining factor because the docking process is still time-consuming method. The number of compounds for biological testing is cost-determining factor because the materials used in the test are cost-consuming. The use of the representative subsets derived from the entire database help reduce runtime of docking procedure. (omitted)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.1-13
• /
• 2022

Household refrigerator cabinets must undergo cyclic testing at -20 ℃ and 65 ℃ for quality control (QC) after their production is complete. These cabinets were assembled from different materials, including acrylonitrile butadiene styrene (ABS), polyurethane (PU) foam, and steel plates. However, different thermal expansion values could be observed owing to differences in the mechanical properties of the materials. In this study, a technique to predict delamination on a refrigerator wall caused by thermal deformation was developed. The mechanical properties of ABS and PU foams were tested, theload factors causing delamination were analyzed, delamination was observed using a high-speed camera, and comparison and verification in terms of stress and strain were performed using a finite element model (FEM). The results indicated that the delamination phenomenon of a refrigerator wall can be defined in two cases. A method for predicting and evaluating delamination was established and applied in an actual refrigerator. To determine the effect of temperature changes on the refrigerator, strain measurements were performed at the weak point and the stress was calculated. The results showed that the proposed FEM prediction technique can be used as a basis for virtual testing to replace future QC testing, thus saving time and cost.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.365-370
• /
• 2014

Although Internet of Things already became a new paradigm on service on network, we should pay more effort for studying about its testing method, since humans, things and environments in IoT are connected to each other without any restrictions. Earlier researches based on emulators showed that such virtual devices on emulators had unavoidable gap between them and real things. Furthermore, growth of connection complexity between the devices and loosing of restrictions make the gap wider. Accordingly, in this paper, we suppose a method of test coverage measurement based on BitTorrent for IoT environment. It has cooperation features among homogeneous devices with avoiding the overlapping on each part of whole test process.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.237-245
• /
• 2003

Since the velocity is dependent on the fiber orientation in anisotropic composites, the application of traditional acoustic emission (AE) source location techniques based on the constant velocity to composite structures has been practically impossible. The anisotropy makes the source location procedure complicated and deteriorates the accuracy of the location. In this study, we have divided the region of interest(ROI) into a set of finite elements, taken each element as a virtual source, and calculated the arrival time differences between sensors by using the velocities at every degree from 0 to 90. The calculated and the experimentally measured values of the arrival time difference aye then compared to minimize the location error. The results from two different materials, namely AA6061-T6 and CFRP(uni-directional; UD, $[0]_{32}4$) laminate confirmed the practical usefulness of the proposed method.

• Journal of KIISE:Software and Applications
• /
• v.36 no.10
• /
• pp.800-815
• /
• 2009

Recently, Web services based service-oriented architecture is widely used to integrate effectively various applications distributed on the networks. In the service-oriented architecture BPEL as a standard modeling language for the business processes provides the way to integrate various services provided by applications. Over the past few years, some types of studies have been made on testing compatibility of services and on discriminating and tracing of the business processes in the services composition. Now a lot of studies about the services composition with BPEL are going on. However there were few efforts to solve the problems caused by the services composition. Especially, there is no effort to evaluate whether a composite service is reliable and whether it is robust against to exceptional situations. In this paper, we suggest a test framework and a testing method for robustness of the composite service written in WS-BPEL. For this, firstly we extract some information from the BPEL process and the participant services. Next, with the extracted information we construct the virtual testing environment that generates various faults and exceptional cases which may be raised within the real services. Finally the testing work for robustness of a composite service is performed on the test framework.

• Steel and Composite Structures
• /
• v.49 no.4
• /
• pp.393-405
• /
• 2023

In this paper, the energy absorption capability of a novel cruciform composite lattice structure was evaluated through the simulation of compression tests. For this purpose, several test samples of Polylactic acid cellular reinforced with continuous glass fibers were prepared for compression testing using the additive manufacturing method of material extrusion. Using a conventional path design for material extrusion, multiple debonding is probable to be occurred at the joint regions of adjacent cells. Therefore, an innovative printing path design was proposed for the cruciform lattice structure. Afterwards, quasistatic compression tests were performed to evaluate the energy absorption behaviour of this structure. A finite element model based on local material property degradation was then developed to verify the experimental test and extend the virtual test method. Accordingly, different combinations of unit cells' dimensions using the design of the experiment were numerically proposed to obtain the optimal configuration in terms of the total absorbed energy. Having brilliant energy absorption properties, the studied cruciform lattice with its optimized unit cell dimensions can be used as an energy absorber in crashworthiness applications. Finally, a cellular structure will be suitable with optimal behavior in crush load efficiency and high energy absorption.

• Journal of the Korean Society for Computer Game
• /
• v.31 no.4
• /
• pp.197-203
• /
• 2018

As people's interest in Virtual Reality has recently increased, peripherals have also made many progress. There is a lot of research being done from VR environment to VR configuration through scanning at room level with various interface devices that can interact with objects in the environment. According to current VR research Home VR uses multiple haptic interfaces to interact with objects configured in the VR environment, the method uses room scanning to some extent is beyond the spatial constraints and may use tracking equipment to interact with real objects. And advances in 3D printers have enabled the distribution of commercial 3D printers and home 3D printers, and made it easy for 3D printers to create models of their choice at home or at home. Considering the above two factors, We think it is necessary to study the difference between a model's object that people feel when interacting directly with an easy-to-create model in a VR environment. Therefore, in this paper, we are going to implement objects produced by 3D printers in VR space and study the differences between using real objects and other general interaction equipment through user testing with those that are actually implemented.