• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1233-1238
• /
• 2009

This study's aim was to confirm that pseudoneglect affects visual attention through car laterality, using a driving simulator with either bisection or quadrisection strategies being applied to road usage. On the pencil and paper tests, the left quadrisection and bisection marks deviated significantly to the left. While driving, the car was significantly lateralized to the right of the lane regardless of conditions. However, in terms of relative laterality, the biggest left laterality occurred on roads 1(bisection), while the smallest left laterality occurred on roads 2 (right quadrisection). Thus, the effect of pseudoneglect was demonstrated in both the pencil and paper tests and the driving simulation task. Also, roads 2 and 4, which were driven on the right side of the lane, showed a tendency for drivers to avoid the centerline, as this was the expected cause of right laterality. This study demonstrated that the pseudoneglect phenomenon can occur in a routine driving task.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.294-301
• /
• 2016

This paper discusses about analyzing in-wheel vehicle's dynamic motion and load torque. Since in-wheel vehicle controls each left and right driving wheels, it is dangerous if vehicle's wheels are not in a cooperative control. First, this study builds the main wheel control logic using PID control theory and evaluates the stability. Using Carsim-Matlab/Simulink, vehicle dynamic motion is simulated in virtual 3D driving road. Through this, in-wheel vehicle's driving performance can be analyzed. The target vehicle is a rear-wheel drive in D-class sedan. Second, by using the first In-wheel vehicle's performance results, it derivate the drive motor's dynamic load torque for applying the dynamometer. Extracted load torque impute to dynamometer's load motor, linear experiment in dynamometer can replicated the 3-D road driving status. Also it, will be able to evaluate the more accurate performance analysis and stability, as a previous step of actual vehicle experiment.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.169-179
• /
• 2014

PURPOSES : This study is to conduct the research on the design principle for the driver's safety and comfort in installing consecutive curves of superhighway. METHODS : Superhighway does not currently exist in domestic area. Thus, this study is conducted by collecting driving behavior usage of 30 people who are involved in the members of the virtual driving simulation. By identifying the distribution characteristics of each scenario in ANOVA & Tukey Test, the distribution are categorized into three groups. RESULTS : In the case of Group A in Section 3 (R2 entry part), lane departure exceeds the safety standard, which means to be risky condition. And then in the case of Group B and C, the lane departure values applying theoretical formula was evenly distributed compared to the proven values. CONCLUSIONS : Based on the result, the continuous curve design principles at superhighway should follow three standards as follow. First, an additional linear part needs to be inserted between two curves. Second, what if inserting the linear part is difficult, it would be better to insert a curve more than 2,000m. Third, R1/R2 ratio should not be over two. This design primarily aims to the safety of the operator. Such road alignment also meets the expectations of drivers, thus, it may help drivers to be compatible and amenable while driving continuous curve in superhighway.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.145-154
• /
• 2006

In the companion paper, the composition and structure of the MATDYMO (Multi-Agent for Traffic Simulation with Vehicle Dynamic Model) were proposed. MATDYMO consists of the road management system, the vehicle motion control system, the driver management system, and the integration control system. Among these systems, the road management system and the integration control system were discussed In the companion paper. In this paper, the vehicle motion control system and the driver management system are discussed. The driver management system constructs the driver agent capable of having different driving styles ranging from slow and careful driving to fast and aggressive driving through the yielding index and passing index. According to these indices, the agents pass or yield their lane for other vehicles; the driver management system constructs the vehicle agents capable of representing the physical vehicle itself. A vehicle agent shows its behavior according to its dynamic characteristics. The vehicle agent contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation is conducted for an interrupted flow model and its results are verified by comparison with the results from a commercial software, TRANSYT-7F. The interrupted flow model simulation is implemented for three cases. The first case analyzes the agents' behaviors in the interrupted flow model and it confirms that the agent's behavior could characterize the diversity of human behavior and vehicle well through every rule and communication frameworks. The second case analyzes the traffic signals changed at different intervals and as the acceleration rate changed. The third case analyzes the effects of the traffic signals and traffic volume. The results of these analyses showed that the change of the traffic state was closely related with the vehicle acceleration rate, traffic volume, and the traffic signal interval between intersections. These simulations confirmed that MATDYMO can represent the real traffic condition of the interrupted flow model. At the current stage of development, MATDYMO shows great promise and has significant implications on future traffic state forecasting research.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.807-813
• /
• 2016

The Maritime Traffic Safety Audit Scheme was institutionalized in 2009 to provide for professional surveys, measurement and the evaluation of navigational hazards that might occur in coastal waters in the course of marine work. Related researches that dealt with the reform of the Maritime Traffic Safety Audit Scheme found that there were no rules or regulations for verifying whether marine work conformed to audit results and reviewing the exactitude of ship handling simulations which were a crucial part of the scheme. According to the necessity of adopting an ex post facto management system in the field of maritime traffic, this study analyzed the similar audit acts such as the Natural Environment Impact Audit Scheme and the Road Traffic Safety Audit Scheme, and proposed specific articles for revising Maritime Safety Act in order to break out from the institutional inertia of the current Maritime Traffic Safety Audit Scheme. It is expected that a newly proposed legal system for verifying the performance of audit results and the exactitude of audits will help improve maritime traffic safety by eradicating potentially hidden hazards related to marine work.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1553-1559
• /
• 2017

This paper proposes a lane departure detection algorithm using a single camera equipped in front of a vehicle. The proposed algorithm generates a partial top-view image for a small ROI (region of interest) designated on the top-view space form the image acquired by the camera, detects lanes on the small partial top-view image, and makes a decision on the lane departure by checking overlap between the pre-assigned virtual vehicle and the detected lanes. The proposed algorithm also includes the removal of lines occurred by road symbols (noises) disturbing the lane departure detection between lanes and the prediction of lost lanes using lane information of previous fames. In lane departure detection test using real road videos, the proposed algorithm makes the right decision of 99.0% in lane keeping conditions and 94.7% in lane departure conditions.

• Smart Media Journal
• /
• v.6 no.3
• /
• pp.15-20
• /
• 2017

Recently, the automotive industry has been studied about driver assistance systems for helping drivers to drive their cars easily by integrating them with the IT technology. This study suggests a method of detecting lanes, robust to road condition changes and applicable to lane departure warning and autonomous vehicles mode. The proposed method uses the method of detecting candidate areas by using the Gaussian filter and by determining the Otsu threshold value and edge. Moreover, the proposed method uses lane gradient and width information through the Hough transform to detect lanes. The method uses road lane information detected before to detect dashed lines as well as solid lines, calculates routes in which the lanes will be located in the next frame to draw virtual lanes. The proposed algorithm was identified to be able to detect lanes in both dashed- and solid-line situations, and implement real-time processing where applied to Raspberry Pi 2 which is open source hardware.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.107-117
• /
• 2020

With the recent development of autonomous vehicles, various sensors installed in vehicles have become common, and big data generated from those sensors is increasingly being used in the transportation field. In this study, we proposed a grid index method to efficiently process real-time vehicle sensing big data and public data such as road weather. The applicability and effect of the proposed grid space division method and grid ID generation method were analyzed. We created virtual data based on DTG data and mapped to the road link based on coordinates. As a result of analyzing the data processing speed in grid index method, the data processing performance improved by more than 2,400 times compared to the existing link unit processing method. In addition, in order to analyze the efficiency of the proposed technology, the virtually generated data was mapped and visualized.

• Smart Media Journal
• /
• v.11 no.11
• /
• pp.25-31
• /
• 2022

Deep learning-based image processing is essential for autonomous vehicles. To process road images in real-time in a System-on-Chip (SoC) environment, we need to execute deep learning models on a NPU (Neural Procesing Units) specialized for deep learning operations. In this study, we imported seven open-source image processing deep learning models, that were developed on GPU servers, to Texas Instrument Deep Learning (TIDL) NPU environment. We confirmed that the models imported in this study operate normally in the SoC virtual environment through performance evaluation and visualization. This paper introduces the problems that occurred during the migration process due to the limitations of NPU environment and how to solve them, and thereby, presents a reference case worth referring to for developers and researchers who want to port deep learning models to SoC environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.54-67
• /
• 2013

The main purpose of this study is to analyze the diversion rate by the levels of delay and the types of display. For this study, we developed the logit model by analyzing the result of SP survey of drivers who have driver's licence after manipulating a virtual driving simulator. The result of analysis was that the types of display was not statistically significant to the diversion rate. On the other hand, the levels of delay was very meaningful factor with the diversion rate. When the main road was flowing smoothly, drivers started to detour at the levels of delay 125% under the traffic free flow state. Similarly, when the levels of delay got worse, the diversion rate kept the same percentage as it was at the levels of delay 125% state which represented a smooth road condition. Likewise, when the main road's traffic flow was slow, drivers appeared to make detours at the same state of the levels of delay 125%. It was found that as the levels of delay got worse, the diversion rose higher than the diversion rate at the condition of slow traffic flow situation with the levels of delay 125%. The result of this study suggests the criterion of drivers detour point. For the conclusion, the result of study would be a reasonable reference for establishing transportation strategies by reflecting drivers' detouring property and would improve the efficiency of traffic flow.