• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.41-52
• /
• 2002

Purpose : 3D conformal radiotherapy, the optimum dose delivered to the tumor and provided the risk of normal tissue unless marginal miss, was restricted by organ motion. For tumors in the thorax and abdomen, the planning target volume (PTV) is decided including the margin for movement of tumor volumes during treatment due to patients breathing. We designed the respiratory gating radiotherapy device (RGRD) for using during CT simulation, dose planning and beam delivery at identical breathing period conditions. Using RGRD, reducing the treatment margin for organ (thorax or abdomen) motion due to breathing and improve dose distribution for 3D conformal radiotherapy. Materials and Methods : The internal organ motion data for lung cancer patients were obtained by examining the diaphragm in the supine position to find the position dependency. We made a respiratory gating radiotherapy device (RGRD) that is composed of a strip band, drug sensor, micro switch, and a connected on-off switch in a LINAC control box. During same breathing period by RGRD, spiral CT scan, virtual simulation, and 3D dose planing for lung cancer patients were peformed, without an extended PTV margin for free breathing, and then the dose was delivered at the same positions. We calculated effective volumes and normal tissue complication probabilities (NTCP) using dose volume histograms for normal lung, and analyzed changes in doses associated with selected NTCP levels and tumor control probabilities (TCP) at these new dose levels. The effects of 3D conformal radiotherapy by RGRD were evaluated with DVH (Dose Volume Histogram), TCP, NTCP and dose statistics. Results : The average movement of a diaphragm was 1.5 cm in the supine position when patients breathed freely. Depending on the location of the tumor, the magnitude of the PTV margin needs to be extended from 1 cm to 3 cm, which can greatly increase normal tissue irradiation, and hence, results in increase of the normal tissue complications probabiliy. Simple and precise RGRD is very easy to setup on patients and is sensitive to length variation (+2 mm), it also delivers on-off information to patients and the LINAC machine. We evaluated the treatment plans of patients who had received conformal partial organ lung irradiation for the treatment of thorax malignancies. Using RGRD, the PTV margin by free breathing can be reduced about 2 cm for moving organs by breathing. TCP values are almost the same values $(4\~5\%\;increased)$ for lung cancer regardless of increasing the PTV margin to 2.0 cm but NTCP values are rapidly increased $(50\~70\%\;increased)$ for upon extending PTV margins by 2.0 cm. Conclusion : Internal organ motion due to breathing can be reduced effectively using our simple RGRD. This method can be used in clinical treatments to reduce organ motion induced margin, thereby reducing normal tissue irradiation. Using treatment planning software, the dose to normal tissues was analyzed by comparing dose statistics with and without RGRD. Potential benefits of radiotherapy derived from reduction or elimination of planning target volume (PTV) margins associated with patient breathing through the evaluation of the lung cancer patients treated with 3D conformal radiotherapy.

• Radiation Oncology Journal
• /
• v.29 no.2
• /
• pp.115-120
• /
• 2011

Purpose: To examine the feasibility of the treatment planning for minimizing carotid artery dose in the radiotherapy of early glottic cancer. Materials and Methods: From 2007 to 2010, computed tomography simulation images of 31 patients treated by radiotherapy for early glottic cancer were analyzed. The virtual planning was used to compare the parallel-opposing fields (POF) with the modified oblique fields (MOF) placed at angles to exclude the ipsilateral carotid arteries. Planning target volume (PTV), irradiated volume, carotid artery, and spinal cord were analyzed at a mean dose, $V_{35}$, $V_{40}$, $V_{50}$ and with a percent dose-volume. Results: The beam angles were arranged 25 degrees anteriorly in 23 patients and 30 degrees anteriorly in 8 dose-volume of carotid artery shows the significant difference (p<0.001). The mean doses of carotid artery were 38.5 Gy for POF and 26.3 Gy for MOF and the difference was statistically significant (p=0.012). Similarly, $V_{35}$, $V_{40}$, and $V_{50}$ also showed significant differences between POF and MOF. Conclusion: The modified oblique field was respected to prevent a carotid artery stenosis and reduce the incidence of a stroke based on these results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.69-77
• /
• 2022

The 3D spatial model is an analysis framework for solving urban problems and is used in various fields such as urban planning, environment, land and housing management, and disaster simulation. The utilization of drones that can capture 3D images in a short time at a low cost is increasing for the construction of 3D spatial model. In terms of building a virtual city and utilizing simulation modules, high location accuracy of aerial survey and precision of 3D spatial model function as important factors, so a method to increase the accuracy has been proposed. This study analyzed location accuracy of aerial survey and precision of 3D spatial model by each condition of aerial survey for urban areas where buildings are densely located. We selected Daerim 2-dong, Yeongdeungpo-gu, Seoul as a target area and applied shooting angle, shooting altitude, and overlap rate as conditions for the aerial survey. In this study, we calculated the location accuracy of aerial survey by analyzing the difference between an actual survey value of CPs and a predicted value of 3D spatial Model. Also, We calculated the precision of 3D spatial Model by analyzing the difference between the position of Point cloud and the 3D spatial Model (3D Mesh). As a result of this study, the location accuracy tended to be high at a relatively high rate of overlap, but the higher the rate of overlap, the lower the precision of 3D spatial model and the higher the shooting angle, the higher precision. Also, there was no significant relationship with precision. In terms of baseline-height ratio, the precision tended to be improved as the baseline-height ratio increased.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.577-586
• /
• 2014

As SNS has increased its influence on the society as a whole, companies also have started to consider how to take advantage of the new service paying specific attention to its characteristics of immediacy, sharability and interactivity. This study aims to circumstantiate the relationship between a task support tool of SNS and task-media fit, user characteristics and performance by focusing on its usage in work field. To address this issue, a Task-Technology Fit model is used to propose a research model considering the characteristics of SNS as a social element, information technology as well as its user characteristics. The outcome shows that job characteristics, virtual competence and media characteristics have a significant influence on task-media fit, whereas virtual competence and SNS characteristics variables have a significant influence on SNS usage. Besides, task-media fit has a significant influence on SNS usage and work performance while SNS usage has a significant influence on work performance. The study suggests that strategic use of SNS helps improve work performance and these individual characteristics should be considered in planning of SNS utilizing strategy.

• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.187-195
• /
• 2006

The purpose of this study was to investigate the optimal beam arrangements for hepatic tumors, according to the location of the hepatic tumor and its relationship to organs at risk (OARs). The virtual gross tumor volumes were divided into four groups according to the Couinaud's classification. Several plans were made for each virtual target, and these plans were compared for the normal tissue complication probabilities (NTCP). For group I, NTCP improved as the number of the beam ports increased. However, plans with more than 5 ports had little advantage. For group II, plans with the beam directions from the anterior side showed better results. Group III contained many OARs near the target, which placed restrictions on the beam-directions. Multi-directional plans yielded a higher dose to the OARs than a simple two-port plan using right anterior oblique and posterior beam (RAO/PA). For group IV, a simple RAO/PA port plan was adequate for protection of remaining liver. NTCP can significantly vary between radiotherapy plans when the location of the tumor and its neighboring OARs are taken into consideration. The results in this study of optimal beam arrangements could be a useful set of guidelines for radiotherapy of hepatic tumors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.175-179
• /
• 2016

Recent advances in technology of medical image have made surgical simulation that is helpful to diagnosis, operation plan, or education. Improving and enhancing the medical imaging have led to the availability of high definition images and three-dimensional (3D) visualization, it allows a better understanding in the surgical and educational field. The Real human field of view is stereoscopic. Therefore, with just 2D images, stereoscopic reconstruction process through the surgeon's head, is necessary. To reduce these process, 3D images have been used. 3D images enhanced 3D visualization, it provides significantly shorter time for surgeon for judgment in complex situations. Based on 3D image data set, virtual medical simulations, such as virtual endoscopy, surgical planning, and real-time interaction, have become possible. This article describes principles and recent applications of newer imaging techniques and special attention is directed towards medical 3D reconstruction techniques. Recent advances in technology of CT, MR and other imaging modalities has resulted in exciting new solutions and possibilities of shoulder imaging. Especially, three-dimensional (3D) images derived from medical devices provides advanced information. This presentation describes the principles and potential applications of 3D imaging techniques, simulation and printing in shoulder and elbow practice.

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.137-146
• /
• 2020

VR(Virtual Reality), which has drawn attention as a major area in ICT, is currently being used in various fields, including medical care, movies and architecture. Although VR technology is used in various fields, contents are mainly developed by creators where needs of users are easily left out of consideration leading to failure in forming a consensus between UI(User Interface) and UX(user experience). To identify the consumer preference and attribute level of VR game content, which is responsible for the largest proportion of VR contents, this study was designed to examine the consumers' preference properties of VR game contents through a Conjoint Analysis and derive the relative importance and weightings of each group. The study collected 166 questionnaires over a total of three months from May to July 2019, 150 of which were completed (90.4%). Statistic analysis was conducted using SPSS Ver. 25.0. The results of the study showed that the genre of the game (42.6%), number of players (24.0%), price for payment (20.3%) and game planning (13.1%) were important attributes in choosing VR games. The optimal mix of attributes was derived with new games, RPGs, multi-play and medium price (22,000 KRW). Before mentioning technology in the expectations of users who use VR game content, which is the most preferred among VR contents, this study recognized the need to have a fun and new experience through VR game content. Therefore, it is expected that this will serve as a reference for consumer behavior of VR game contents and research on VR game contents development.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.173-187
• /
• 2004

The horizon of using GIS technologies can be expanded to analyzing spatial changes by time in reality. Traditional GIS technologies usually use maps for a snapshot aspect of spatial information. Limitations of the present GIS technologies in terms of dealing with spatial changes require more solutions for collecting, processing and analyzing spatial data with time. Traditional GIS technologies include Temporal GIS, Real-time GIS and Virtual GIS respectively but those are not capable enough to represent spatial change in an overall perspective. By reflecting dynamic changes the current GIS technologies can be more useful and valuable than before. This study assumes that '4D GIS', a composite of temporal, realtime and virtual GIS technology, will open a new horizon for the future sophisticated GIS applications. By identifying a technology application model for 4D GIS the new concept of 4D GIS can be clarified. The model is established by combining dynamic spatial information types and applicable 4D GIS technologies, which are identified from the most current 4D application and research efforts. The technology application model for 4D GIS can be expected to contribute to efficient in planning for 4D GIS technology development in the future.he future.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.649-658
• /
• 2009

The recent emergence of the paradigm of new urban planning for building intelligent urban spaces, such as U-City and U-Eco City, of which the concept of ubiquitous technology is applied, requires high quality three-dimensional spatial information of the urban area. The aim of this study is to build a multi-dimensional spatio-visual information system that includes the solution for visualization, spatial information search, analysis, and evaluation by integrating various types of 3D-modeled spatial information concerning the large urban-size area based on the latest GIS application technology. The range of this study is the integration, visualization, and utilization of spatial information with the goal of building 3D virtual urban environment of high-quality and high-resolution by increasing the utilization of the systematic urban facilities in order to fully reflect the actual user's needs, using the aerial LiDAR data as the plan to overcome the limitations of the existing 3D urban modeling. By reproducing the virtual urban environment the most similar to the actual world through the mash-up of satellite images and aerial photos on the standard format of spatial information constituted of properties and signs, the system will be built with many analysis and utilization functions that support the view and sunlight analysis, various administrative tasks, as well as the decision making process of the city.

• The Journal of the Korea Contents Association
• /
• v.9 no.9
• /
• pp.60-67
• /
• 2009

This paper describes a development of system that enables the user to simulate the rockfall and landslide from slopes using physical engine. Until now, it will not be able to accomplish the virtual experiment of three-dimensional interpretation about slope informations, stability evaluation, the rockfall and landslide simulation, etc., because of absence of three-dimensional simulation systems which relates with slopes. With like that reason, this paper developed a simulator which is identical or similar the rockfall and the landslide where the possibility which will occur or occurred from actuality is high very actual condition from virtual experiment. For a simulator development, this paper uses the physical engine which is mainly used from computer game and animation development etc., And it will be show the process where the rockfall and landslide occurs with simulator. This simulator which sees the process where the rockfall and the landslide occur from three-dimension computer graphics theory and the physical engine, is a system which is the possibility of showing actual feeling. Therefore, the result of this paper is applied in vehicle travelling guidance system and intelligence traffic systematic etc., because of creates visual service and three-dimensional application of the slope information database which is developed in existing, and will be able to forecast the upgrade of user benefit planning and a service.