• 공학논문집
• /
• 제3권1호
• /
• pp.131-138
• /
• 1998

본 논문은 기술적인 진보보다는 개념적 변화에 초점을 맞추어 근거리통신망의 진화 방향에 대하여 살펴본다. 현재까지 많이 사용되는 주요한 근거리통신망 기술을 토폴로지, 채널의 타이밍구조, 매체접근제어 항목으로 분류하고 최근 근거리통신망에서 나타난 진전된 기술 및 새로운 개념들을 살핀다. 근거리통신망의 진화에서 가장 영향을 미친 근본적인 요소는 집중형 백본 개념으로 보인다. 종래의 LAN의 개념과는 근본적으로는 다른 ATM 기술이 LAN에 적용되고 있으며, 전통적인 근거리통신망이 ATM과 경쟁하기 위해서는 QOS의 지원이 가능하도록 발전해야 될 것이다.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.621-630
• /
• 2018

In the note a comprehensive and optimal passive-active mode for describing the limit failure of circular shallow tunnel with settlement is put forward to predict the catastrophic stability during the geotechnical construction. Since the surrounding soil mass around tunnel roof is not homogeneous, with tools of variation calculus, several different curve functions which depict several failure shapes in different soil layers are obtained using virtual work formulae. By making reference to the simple-form of Power-law failure criteria based on numerous experiments, a numerical procedure with consideration of combination of upper bound theorem and stochastic medium theory is applied to the optimal analysis of shallow-buried tunnel failure. With help of functional catastrophe theory, this work presented a more accurate and optimal failure profile compared with previous work. Lastly the note discusses different effects of parameters in new yield rule and soil mechanical coefficients on failure mechanisms. The scope of failure block becomes smaller with increase of the parameter A and the range of failure soil mass tends to decrease with decrease of unit weight of the soil and tunnel radius, which verifies the geomechanics and practical case in engineering.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.352-361
• /
• 2017

This paper proposes a design and fabrication of the test equipment that is implemented as a part of the airborne tracking radar inspection under the environment of indoor simulation. This test equipment provides controlling the operation status of airborne tracking radar and replicating the velocity and range information of target by generating a variety of target signal. This is mainly composed of radar operation controller, target signal generator, horn antenna driving devices. Radar operation controller is able to perform the controlling of radar operation mode and monitoring in real time by serial communication. Target signal generator is generated doppler signal and range delayed signal using virtual target of RF-band. Horn antenna driving devices perform a role of target simulating exercise. In the end, the performance is demonstrated using experiment results of test equipment for airborne tracking radar.

• Journal of Information Processing Systems
• /
• 제12권3호
• /
• pp.511-524
• /
• 2016

The Virtual Local Area Network (VLAN) has been used for a long time in campus and enterprise networks as the most popular network virtualization solution. Due to the benefits and advantages achieved by using VLAN, network operators and administrators have been using it for constructing their networks up until now and have even extended it to manage the networking in a cloud computing system. However, their configuration is a complex, tedious, time-consuming, and error-prone process. Since Software Defined Networking (SDN) features the centralized network management and network programmability, it is a promising solution for handling the aforementioned challenges in VLAN management. In this paper, we first introduce a new architecture for campus and enterprise networks by leveraging SDN and OpenFlow. Next, we have designed and implemented an application for easily managing and flexibly troubleshooting the VLANs in this architecture. This application supports both static VLAN and dynamic VLAN configurations. In addition, we discuss the hybrid-mode operation where the packet processing is involved by both the OpenFlow control plane and the traditional control plane. By deploying a real test-bed prototype, we illustrate how our system works and then evaluate the network latency in dynamic VLAN operation.

• 유공압시스템학회논문집
• /
• 제8권3호
• /
• pp.1-7
• /
• 2011

As the technologies of electronic device have advanced these days, most of mechanical systems are designed with electronic control unit to take advantage of control parameter adaption to operating conditions and firmware flexibilities as well. On-board diagnosis, which detects the system malfunction and identifies potential source of error with its own diagnostic criteria, and fail-safe that can switch the mode of operation in view of recognized error characteristics enables easy maintenance and troubleshooting as well as system protection. This paper dealt with the development of diagnosis and fail-safe function for proportional flow control valve. All type of errors related to valve control system components are investigated and assigned to a specific hexadecimal codes. Cumulative error detection algorithm is applied in order for the sensitivity and reliability to be appropriate. Embedded simulator which runs simultaneously with system program provides the virtual error simulation environment for expeditious development of error detection algorithm. The diagnosis function was verified both with solenoid valve and embedded simulator test and it will enhance the valve control system monitoring function.

• 한국게임학회 논문지
• /
• 제1권1호
• /
• pp.55-60
• /
• 2001

With rapid development of graphic hardware, researches on Virtual Reality and 3D Games have received more attention than before. For more realistic 3D graphic scene, objects were to be presented with lots of polygons and the number of objects shown in a scene was remarkably increased. Therefore, for effective visualization of large polygon models like this, view-frustum culling method, that visualizes only objects shown in the screen, has been widely used. In general, the bounding boxes that include objects are generated firstly, and the boxes are intersected with view-frustum to check whether object is in the visible area or not. Recently, an algorithm that can check in-out test of objects using OpenGL's selection mode, which is originally used to select the objects in the screen, is suggested. This algorithm is fast because it can use hardware acceleration. In this study, by implementing and applying this algorithm to large polygon models, we showed the efficiency of OpenGL assisted View-Frustum Culling algorithm. If this algorithm is applied to 3D games that have to process more complicated characters and landscapes, performance improvement can be expected.

• Journal of Communications and Networks
• /
• 제4권2호
• /
• pp.148-157
• /
• 2002

This paper investigates schemes to improve TCP performance in multipath forwarding networks. In multipath routing, packets to the same destination are sent to multiple next-hops in either packet-level or flow-level forwarding mode. Effective bandwidth is increased since we can utilize unused capacity of multiple paths to the destination. In packet-level multipath forwarding networks, TCP performance may not be enhanced due to frequent out-of-order segment arrivals at the receiver because of different delays among paths. To overcome this problem, we propose simple TCP modifications. At the sender, the fast retransmission threshold is adjusted taking the number of paths into consideration. At the receiver, the delayed acknowledgment scheme is modified such that an acknowledgment for an out-of-order segment arrival is delayed in the same way for the in-order one. The number of unnecessary retransmissions and congestion window reductions is diminished, which is verified by extensive simulations. In flow-level multipath forwarding networks, hashing is used at routers to select outgoing link of a packet. Here, we show by simulations that TCP performance is increased in proportion to the number of paths regardless of delay differences.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1327-1337
• /
• 2018

This paper investigates the vibration behavior of pristine and defected triangular graphene sheets; which has recently attracted the attention of researchers and compare these two types in natural frequencies and sensitivity. Here, the molecular dynamics method has been employed to establish a virtual laboratory for this purpose. After measuring the different parameters obtained by the molecular dynamics approach, these data have been analyzed by using the frequency domain decomposition (FDD) method, and the dominant frequencies and mode shapes of the system have been extracted. By analyzing the vibration behaviors of pristine triangular graphene sheets in four cases (right angle of 45-90-45 configuration, right angle of 60-90-30 configuration, equilateral triangle and isosceles triangle), it has been demonstrated that the natural frequencies of these sheets are higher than the natural frequency of a square sheet, with the same number of atoms, by a minimum of 7.6% and maximum of 26.6%. Therefore, for increasing the resonance range of sensors based on 2D materials, nonrectangular structures, and especially the triangular structure, can be considered as viable candidates. Although the pristine and defective equilateral triangular sheets have the highest values of resonance, the sensitivity of defective (45,90,45) triangular sheet is more than other configurations and then, defective (45,90,45) sheet is the worst choice for sensor applications.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.769-780
• /
• 2022

This paper studies the dynamic behavior of laminated composite circular cylindrical shells interacting with a fluid. The mathematical formulation of the dynamic problem for an elastic body is developed based on the variational principle of virtual displacements and the relations of linear elasticity theory. The behavior of an ideal compressible fluid is described by the potential theory, the equations of which together with boundary conditions are transformed to a weak form. The hydrodynamic pressure exerted by the fluid on the internal surface of the shell is calculated according to the linearized Bernoulli equation. The numerical implementation of the mathematical formulation has been done using the semi-analytical finite element method. The influence of the ply angle and lay-up configurations of laminated composites on the natural vibration frequencies and the hydroelastic stability boundary have been analyzed for shells with different geometrical dimensions and under different kinematic boundary conditions set at their edges. It has been found that the optimal value of the ply angle depends on the level of filling of the shell with a fluid. The obtained results support the view that by choosing the optimal configuration of the layered composite material it is possible to change upwards or downwards the frequency and mode shape, as well as the critical velocity for stability loss over a wide range.

• Archives of Plastic Surgery
• /
• 제50권2호
• /
• pp.200-209
• /
• 2023

Background As the coronavirus disease 2019 virus made its way throughout the world, there was a complete overhaul of our day-to-day personal and professional lives. All aspects of health care were affected including academics. During the pandemic, teaching opportunities for resident training were drastically reduced. Consequently, medical universities in many parts across the globe implemented online learning, in which students are taught remotely and via digital platforms. Given these developments, evaluating the existing mode of teaching via digital platforms as well as incorporation of new models is critical to improve and implement. Methods We reviewed different online learning platforms used to continue regular academic teaching of the plastic surgery residency curriculum. This study compares the four popular Web conferencing platforms used for online learning and evaluated their suitability for providing plastic surgery education. Results In this study with a response rate of 59.9%, we found a 64% agreement rate to online classes being more convenient than normal classroom teaching. Conclusion Zoom was the most user-friendly, with a simple and intuitive interface that was ideal for online instruction. With a better understanding of factors related to online teaching and learning, we will be able to deliver quality education in residency programs in the future.