• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.286-293
• /
• 2022

Recently, the importance of elemental technologies constituting smart factories is increasing due to the 4th Industrial Revolution, and simulation is widely used as a tool to learn these technologies. In particular, PID control is an automatic control technique used in various fields, and most of them analyze mathematical models in certain situations or research on application development with built-in controllers. In actual educational environment requires PID simulator training as well as PID control principles. In this paper, we propose a model that enables education and practice of various PID controls through 3D simulation. The proposed model implemented virtual balls and Fan and implemented PID control by configuring a system so that the force can be lifted by the air pressure generated in the Fan. At this time, the height of the ball was expressed in a graph according to each gain value of the PID controller and then compared with the actual system, and through this, satisfactory results sufficiently applicable to the actual class were confirmed. Through the proposed model, it is expected that the rapidly increasing elemental technology of smart factories can be used in various ways in a remote classroom environment.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.53-66
• /
• 2023

Recently, there has been a significant interest in the development of autonomous driving simulation environment based on digital twin. In the development of such digital twin-based simulation environment, many researches has been conducted not only performance and functionality validation of autonomous driving, but also generation of virtual training data for deep learning. However, such digital twin-based autonomous driving simulation system has the problem of requiring a significant amount of time and cost for the system development and the data construction. Therefore, in this research, we aim to propose a method for rapidly designing and implementing a digital twin-based autonomous driving simulation system, using only the existing 3D models and high-definition map. Specifically, we propose a method for integrating 3D model of FBX and NGII HD Map for the Busan EDC area into CARLA, and a method for adding and modifying CARLA functions. The results of this research show that it is possible to rapidly design and implement the simulation system at a low cost by using the existing 3D models and NGII HD map. Also, the results show that our system can support various functions such as simulation scenario configuration, user-defined driving, and real-time simulation of traffic light states. We expect that usability of the system will be significantly improved when it is applied to broader geographical area in the future.

• Journal of Industrial Convergence
• /
• v.22 no.1
• /
• pp.137-148
• /
• 2024

This study aims to analyse the research trends and identify issues in elementary physical education in the new normal era. For this purpose, the taxonomic analysis method proposed by Spradley (2016) was applied, and 43 Korean academic articles were finally categorised and analysed. The findings are as follows. First, due to the changes in the educational environment caused by COVID-19, most of the remote and online physical education classes were conducted as content-oriented classes. It was found that there was a lack of communication between teachers and students in online physical education classes. Second, the difficulties of remote and online physical education classes and online and offline combined physical education classes, as well as research on how to overcome and improve them, were concentrated. Third, the need for evolution of physical education teachers and training of future professionals in line with the methodological transformation of primary physical education and the current situation was raised. In addition, the number of studies utilising blended learning, flipped learning, and new technologies, which have gained attention in primary physical education due to COVID-19, has increased. Based on the findings, we proposed the direction and future tasks of elementary physical education in the new normal era.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.81-99
• /
• 2010

Lately, in consumers' markets the number of new items is rapidly increasing at an overwhelming rate while consumers have limited access to information about those new products in making a sensible, well-informed purchase. Therefore, item providers and customers need a system which recommends right items to right customers. Also, whenever new items are released, for instance, the recommender system specializing in new items can help item providers locate and identify potential customers. Currently, new items are being added to an existing system without being specially noted to consumers, making it difficult for consumers to identify and evaluate new products introduced in the markets. Most of previous approaches for recommender systems have to rely on the usage history of customers. For new items, this content-based (CB) approach is simply not available for the system to recommend those new items to potential consumers. Although collaborative filtering (CF) approach is not directly applicable to solve the new item problem, it would be a good idea to use the basic principle of CF which identifies similar customers, i,e. neighbors, and recommend items to those customers who have liked the similar items in the past. This research aims to suggest a hybrid recommendation procedure based on the preference boundary of target customer. We suggest the hybrid recommendation procedure using the preference boundary in the feature space for recommending new items only. The basic principle is that if a new item belongs within the preference boundary of a target customer, then it is evaluated to be preferred by the customer. Customers' preferences and characteristics of items including new items are represented in a feature space, and the scope or boundary of the target customer's preference is extended to those of neighbors'. The new item recommendation procedure consists of three steps. The first step is analyzing the profile of items, which are represented as k-dimensional feature values. The second step is to determine the representative point of the target customer's preference boundary, the centroid, based on a personal information set. To determine the centroid of preference boundary of a target customer, three algorithms are developed in this research: one is using the centroid of a target customer only (TC), the other is using centroid of a (dummy) big target customer that is composed of a target customer and his/her neighbors (BC), and another is using centroids of a target customer and his/her neighbors (NC). The third step is to determine the range of the preference boundary, the radius. The suggested algorithm Is using the average distance (AD) between the centroid and all purchased items. We test whether the CF-based approach to determine the centroid of the preference boundary improves the recommendation quality or not. For this purpose, we develop two hybrid algorithms, BC and NC, which use neighbors when deciding centroid of the preference boundary. To test the validity of hybrid algorithms, BC and NC, we developed CB-algorithm, TC, which uses target customers only. We measured effectiveness scores of suggested algorithms and compared them through a series of experiments with a set of real mobile image transaction data. We spilt the period between 1st June 2004 and 31st July and the period between 1st August and 31st August 2004 as a training set and a test set, respectively. The training set Is used to make the preference boundary, and the test set is used to evaluate the performance of the suggested hybrid recommendation procedure. The main aim of this research Is to compare the hybrid recommendation algorithm with the CB algorithm. To evaluate the performance of each algorithm, we compare the purchased new item list in test period with the recommended item list which is recommended by suggested algorithms. So we employ the evaluation metric to hit the ratio for evaluating our algorithms. The hit ratio is defined as the ratio of the hit set size to the recommended set size. The hit set size means the number of success of recommendations in our experiment, and the test set size means the number of purchased items during the test period. Experimental test result shows the hit ratio of BC and NC is bigger than that of TC. This means using neighbors Is more effective to recommend new items. That is hybrid algorithm using CF is more effective when recommending to consumers new items than the algorithm using only CB. The reason of the smaller hit ratio of BC than that of NC is that BC is defined as a dummy or virtual customer who purchased all items of target customers' and neighbors'. That is centroid of BC often shifts from that of TC, so it tends to reflect skewed characters of target customer. So the recommendation algorithm using NC shows the best hit ratio, because NC has sufficient information about target customers and their neighbors without damaging the information about the target customers.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.2
• /
• pp.81-96
• /
• 2024

This study analyzed the differences in the effects on entrepreneurship and entrepreneurial willingness of college students under the coronavirus pandemic by dividing theoretical education into practical education, face-to-face education, and non-face-to-face education, and analyzed the differences in the effects on entrepreneurship and entrepreneurship willingness according to the education method. This study conducted entrepreneurship education for 552 students at a comprehensive university in Chungcheong-do, Korea, and analyzed the sample by dividing it into theoretical and practical education, face-to-face education, and non-face-to-face education. In addition, a two-way repeated measures ANOVA was conducted to determine whether there were differences in the entrepreneurship education course operation form according to the pre- and post-education time points. The results showed that, first, the difference between the effectiveness of entrepreneurship education before and after theoretical and practical education was significant, and the entrepreneurship of practical education was higher than that of theoretical education after education. In the test of pre- and post-training differences in entrepreneurial intention, the difference in effectiveness was significant only in practical training. Second, the results of the repeated measures ANOVA analysis of the course operation type of theoretical and practical courses according to the difference between the pre- and post-education time points showed that there were differences in the entrepreneurship effectiveness of theoretical and practical courses according to the time point of education. Third, the difference in the effectiveness of entrepreneurship education according to face-to-face and non-face-to-face education was significant, and only the effect of non-face-to-face education on entrepreneurial intention was significant before and after education. Fourth, the results of repeated measures ANOVA analysis of face-to-face and non-face-to-face course operation type showed that the effect of face-to-face and non-face-to-face entrepreneurship education differed depending on the time of education. The pre-post difference in entrepreneurial intention was significant only for the non-face-to-face program. The implication of this study is that in order to increase the effectiveness of entrepreneurship and entrepreneurial will among university students, it is necessary to expand the amount of practical classes in which students actively participate in activities related to entrepreneurship. In addition, in order to increase the effectiveness of entrepreneurial will, a non-face-to-face education method that utilizes the metaverse space and increases the role of each student can contribute to increasing the effectiveness of entrepreneurial will.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.652-665
• /
• 2016

National Competency Standards or NCS is an educational system that emphasizes developing job-related abilities. Therefore it will be an effective solution in training field-oriented work forces if properly applied. However, in the department of social welfare, it is not easy to apply NCS to the curriculum since most academic subjects concerning social welfare focus not on practice but on theory and in addition, most of social welfare departments in junior colleges have an accredited curriculum for the 2nd degree of the social worker qualification. This means it is preposterous if NCS is applied to the curriculum without prior changes in the existing qualification system. So, this paper proposes a draft model to apply NCS to the already-accredited curriculum for the 2nd degree social workers in the junior colleges and details are as follows. Firstly, the competency units will be customized for the existing academic subjects in the curriculum rather than developing new subjects in accordance with NCS competency units. Secondly, some client-related competency units including children, seniors, the disabled are newly developed and then applied to the curriculum, which are crucial for the career development at the junior college level. Thirdly, the competency units are categorized into three types in accordance with the degree of job relevancy - type 1, type 2, type 3. Fourthly, four out of 11 basic job abilities are selected and then developed into academic subjects. Fifthly, all competency units concerning the main job market are regarded as one virtual competency unit and then arranged in the order of type 1s, type 2s and type 3s and then the scope of their study is adjusted to the job abilities required at the main job market.

• Journal of Christian Education in Korea
• /
• v.70
• /
• pp.207-238
• /
• 2022

Faith education focuses on 'changing the direction of life' that pursues the life of Christ. This is possible only when the message of the Bible is embodied in life, not by accumulating biblical knowledge. Today, however, faith education does not allow biblical messages to be embodied in life. This is the result of focusing on knowing the Bible itself, instead of guiding the faith education to meet the Bible and the experience of human life. Church education emphasized the inner faith of individuals rather than changes in life and practice, preparing for the afterlife, and mostly for the training and quantitative growth of the church. As a result, in the COVID-19 era, Protestants showed an immature appearance that only cared about the safety of the church, and social trust in Protestants was lost. Therefore, faith education should educate what life of the Bible and the experiences of the learner will meet and respond to God in order for the Bible's message to be realized in life. I tried to find out how to prepare for this faith education in detail. So I would like to look at "The preparation process for religious classes related to experience" compiled by the German Protestant Lutheran Bavarian Presbyterian Church and present tasks for application to the Korean Church. Preparation for experience-related religious classes consists of five courses. It is a personal meeting, a theological orientation, a pedagogical orientation, a pedagogical decision, and a summary of the progress plan. The main purpose of this process is to learn how biblical believers interpreted their experiences in life from the perspective of faith and tried to overcome the problem. Faith education related to experience deals with the essence of faith education, not one of the Bible teaching methods. Although the field of education is in the social change of expanding from the real world to the virtual world, the essential nature of faith education cannot change. Therefore, research and application of faith education related to experience in Korean churches will help the biblical message to be embodied in Christian life.