• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.73-78
• /
• 2020

In this study, a novel reactive power control scheme is proposed to supply stable reactive power to the distribution line by compensating a ripple voltage of DC link. In a single-phase system, a magnitude of second harmonic is inevitably generated in the DC link voltage, and this phenomenon is further increased when the capacity of DC link capacitor decreases. Reactive power control was performed by controlling the d-axis current in the virtual synchronous reference frame, and the voltage control for maintaining the DC link voltage was implemented through the q-axis current control. The proposed method for compensating the ripple voltage was classified into three parts, which consist of the extraction unit of DC link voltage, high pass filter (HPF), and time delay unit. HPF removes an offset component of DC link voltage extracted from integral, and a time delay unit compensates the phase leading effect due to the HPF. The compensated DC voltage is used as feedback component of voltage control loop to supply stable reactive power. The performance of the proposed algorithm was verified through simulation and experiments. At DC link capacitance of 375 uF, the magnitude of ripple voltage decreased to 8 Vpp from 74 Vpp in the voltage control loop, and the total harmonic distortion of the current was improved.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.166-171
• /
• 2022

In this paper, we propose an algorithm to improve DoA(direction of arrival) estimation performance of the subspace-based method by generating high robustness correlation matrix of the signals incident on the uniformly linear array antenna. The existing subspace-based DoA estimation method estimates the DoA by obtaining a correlation matrix and dividing it into a signal subspace and a noise subspace. However, the component of the correlation matrix obtained from the low SNR and small number of snapshots inaccurately estimates the signal subspace due to the noise component of the antenna, thereby degrading the DoA estimation performance. Therefore a robust correlation matrix is generated by arranging virtual signal vectors obtained from the existing correlation matrix in a sliding manner. As a result of simulation using MUSIC and ESPRIT, which are representative subspace-based methods,, the computational complexity increased by less than 2.5% compared to the existing correlation matrix, but both MUSIC and ESPRIT based on RMSE 1° showed superior DoA estimation performance with an SNR of 3dB or more.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.3
• /
• pp.137-148
• /
• 2012

Cloud service users request dedicated virtual computing resource from the cloud service provider to process jobs in independent environment from other users. To optimize this process with automated method, in this paper we proposed a framework for workflow scheduling in the cloud environment, in which the core component is the middleware called broker mediating the interaction between users and cloud service providers. To process jobs in on-demand and virtualized resources from cloud service providers, many papers propose scheduling algorithms that allocate jobs to virtual machines which are dedicated to one machine one job. With this method, the isolation of being processed jobs is guaranteed, but we can't use each resource to its fullest computing capacity with high efficiency in resource utilization. This paper therefore proposed a cost-efficient job scheduling algorithm which maximizes the utilization of managed resources with increasing the degree of multiprogramming to reduce the number of needed virtual machines; consequently we can save the cost for processing requests. We also consider the performance degradation in proposed scheme with thrashing and context switching. By evaluating the experimental results, we have shown that the proposed scheme has better cost-performance feature compared to an existing scheme.

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.15-23
• /
• 2017

This paper describes verification of APR1400 reactor vessel by applying the system engineering approach, in which the design re-engineering method is used to check the design parameters of APR1400 RV (reactor vessel). The RV is classified as safety class 1 and therefore must adhere strictly to the rules of ASME BPVC section III, subsection NB and seismic category I. This study explores designing the RV by following the ASME guidelines and making a comparative study with the current design. To meet this objective we apply system engineering methodologies to structure the process and allow for verification and validation of the major RV design parameters such as thickness of RV. The structural thicknesses of various part of RV are determined as well as reinforcements on the RV major nozzles. A 3D virtual reality model was created based on the design parameters using CATIA V5 and animation using Dassault Composer V2016. A comparison of re-engineered ARP1400 RV and standard APR1400 RV was done to show which design parameters were taken more conservative approach.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.247-249
• /
• 2007

Urban dynamometer driving schedule(FTP-75 mode) plays very significant role on automotive emission test, due to reference point. The overall system energy efficiency of a HEV(Hybrid Electric Vehicle) is highly dependent on the energy management strategy employed. An energy source is the heart of a HEV. In order to applicable to a vehicle component, it must be need to real world test result. But, the present state of things have numerous problems. In this paper, be studied performed based on HEV simulation software in virtual world and chassis dynamometer test in real world and the result make a comparative. Toyota Prius vehicle was adapted as a modeling and real testing to evaluate the hybrid components and energy balancing management. The point at issue is voltage and current analysis for HEV battery SOC(State of Charge), and verification for energy.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.89-103
• /
• 2016

Due to safety of the plant, it became very clear the importance of study occurrence reactor coolant system (RCS) issues specially the primary water stress corrosion cracking (PWSCC). The Systems Engineering (SE) approach is characterized by the application of a structured engineering methodology for the design of a complex system or component. Robotic devices have been used for internal inspection, maintenance and performing remote welding and inspection in high-radiation areas. In this paper, PWSCC overview and inlay and over lay welding methodology introduced, concept of robotic device that can be inserted into the piping via Steam Generator (SG) main way to access to primary piping of pressurized water reactor (PWR) is developed based on SE methodology. A 3D model of the inspection system was developed along with the APR1400 (Advanced Power Reactor)reactor coolant systems (RCS) and internals with virtual 3D simulation of the operation for visualization to prove the validity of the concept.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.356-360
• /
• 2003

There have been many considerations to develop new content services that integrate a variety of contents databases being already constructed and then produce new content services which are more valuable than existing services in many applications such as Internet portal, EC, and CRM. By doing the above thing, the burden of searching databases to access interesting databases and service applications can be reduced and the database availability of users is also enhanced through a single view integrating multiple contents database. This paper presents implementation details of the query processing system that is a core component of the database integration system, which can construct a virtual database that integrates databases being managed by multiple heterogeneous database systems using XML data model and support a quay facility on the integrated database.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12B
• /
• pp.1044-1048
• /
• 2006

This paper proposes a FTOG(Fault-Tolerant Object Group)-based recovery services through replicated objects. In the distributed system, the fault of the object component may cause an entire system failure, evidently raising the service breakdowns. Therefore, this paper proposes recovery services with the replicated objects in case of fault occurrences. Moreover, applying the FTOG model to a virtual home network simulation, we verify the consistency maintenance and the service reliability of the proposed model.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.131-147
• /
• 2014

Purpose of this study is to analyze the meaning of the hybrid digital culture and to find out the features of digital fashion shows appearing in the period of the hybrid digital culture as there have been almost no studies on the hybrid cultural values in the fashion shows and on the diachronic socio-cultural viewpoint of fashion show. The characteristics of hybrid digital culture were identified through the analysis of cases, and they were organized into three for this study; 'non-economic creativity', 'interactive communication' and 'transcendence'. Based on these characteristics, the features of hybrid digital cultures in the modern digital fashion shows were classified into the digitalization of presentation form and the acceptance by audience of digitalization using case studies. The features of digital fashion shows which appear through the presentation form in the digital fashion shows are as follows; 'Expansion of presentation media of runway' and 'Destruction of component factors of runway'. The features of digital fashion show in the perspective of audience's acceptance of digitalization are as follows; 'Audience's field experience through the live video', 'Participation by audience in interactive manner' and, 'Immersion in the virtual reality by the audiences'.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.1
• /
• pp.31-43
• /
• 2007

Sensor data have the characteristics such as numerous and continuous data. Therefore, it is required to develop an index which could retrieve a specific sensor data efficiently from numerous sensed data. The index should have an efficient delete operation for the past data to support the data archiving. In this paper, we have proposed and implemented an index splitting technique to support the sensor data archiving. These splitted indexes compose of a virtual index (that is, index management component), which is shown as single tree from outside. Experimental results show that in the case of 100,000 insert operations the splitted index performs 8% better than the traditional TB-tree maximumly. And the splitted index outperforms TB-tree with retrieving queries when the region of query is small and the size of time domain is large.