• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1461_1462
• /
• 2009

송전선로에 설취된 애자들은 지속적인 전기적 기계적 스트레스에 노출되어 있기 때문에 여러 환경적 요인으로 인해 애자 표면의 열화가 가속된다. 이와 같은 애자의 표면 열화는 dryband를 형성하게 되고 지속적인 애자 표면상의 dryband와 누설 전류 증가의 상호작용은 애자의 섬락를 일으키는 원인이 된다. 이러한 연구의 결과 고전압용 애자로 유입되는 누설 전류는 애자 열화의 정도를 평가할 수 있는 매우 중요한 parameter임을 알 수 있다. 따라서 고전압용 애자의 누설전류를 분석하고 취득하여 애자의 열화 평가 및 이로 인해 발생할 수 있는 결함 애자의 검출에 대한 연구가 절실히 요구되고 있다. 본 논문에서는 고전압용 애자 중 자기애자의 습도변화에 따른 누설전류 특성을 조사하기 위해 자체 제작한 실험 챔버, power transformer, 전류센서, 오실로스코프, PC등으로 구성된 실험 시스템을 구축하였고, 데이터 분석을 위한 S/W로서 LabView를 사용하였다. 그에 따른 실험결과로서 다양한 습도변화(30%~90%)의 경우 정상 애자련과 결함 애자를 포함한 애자련의 누설전류 데이터를 취득하여 본 연구에서 제시한 알고리즘을 통해 분석함으로써 정상 애자 내의 결함 애자 포함 여부를 판별하고 다양한 습도 변화시에 정상 애자련과 불량 애자련의 특징을 볼 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.3
• /
• pp.299-306
• /
• 2002

The load frequency control(LFC) of power system is one of important subjects in view of system operation and control. That is, even though the rapid load disturbances are applied to the given power system, the stable and reliable power should be supplied to the users, converging unconditionally and rapidly the frequency deviations and the tie-line power flow ones of each area into allowable boundary limits. Nonetheless of such needs, if the internal parameter perturbation and the sudden load variation are given, the unstable phenomena of power systems can be often brought out because of the large frequency deviation and the unsuppressible power line one. So, an optimal modulation controller for UC of multi-area power system is designed by a recursive algorithm that determines the state weighting matrix Q of a linear quadratic performance criterion. The optimal modulation controller is based on optimal control and can obtain the exact dynamic response of the UC of multi-area power system in the time domain. The performances of the resultant optimal modulation control, that is, the steady-state deviations of frequency and tie-line power flow and the related dynamics, were investigated and analyzed in detail by being applied to the UC of multi-area power system in the perturbations of predetermined internal parameters. Through the simulation results tried variously in this paper for disturbance of stepwise load changes, the superiorities of the proposed optimal modulation controller in robustness and stability were proved.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.1 s.16
• /
• pp.33-43
• /
• 2005

The girder wheel load distribution factors stated in the Korean Bridge Specification and AASHTO Standard Specifications do not account for the effect of skewness of plate girders, and very little research has been conducted on girder wheel load distribution factors. The purpose of the study is to propose load distribution factor formulas for skew plate girder bridges which comprise various parameters through structural analysis. To confirm the validity of finite element models used in this study analytic values are compared with the field test results. From the results it should be noted that span length is not such a dominant parameter compared with others. In view of better load distribution of interior girders, skew arranged cross beams or bracing are preferable, furthemore bracing system is more effective than cross beam system. By means of regression analysis on the basis of analytic results wheel load distribution factor formulas are proposed and compared with current codes.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.433-436
• /
• 2004

In this paper, we introduce a new Fuzzy Polynomial Neural Networks (FPNNS)-like structure whose neuron is based on the Fuzzy Set-based Fuzzy Inference System (FS-FIS) and is different from that of FPNNS based on the Fuzzy relation-based Fuzzy Inference System (FR-FIS) and discuss the ability of the new FPNNS-like structure named Fuzzy Set-based Polynomial Neural Networks (FSPNN). The premise parts of their fuzzy rules are not identical, while the consequent parts of the both Networks (such as FPNN and FSPNN) are identical. This difference results from the angle of a viewpoint of partition of input space of system. In other word, from a point of view of FS-FIS, the input variables are mutually independent under input space of system, while from a viewpoint of FR-FIS they are related each other. The proposed design procedure for networks architecture involves the selection of appropriate nodes with specific local characteristics such as the number of input variables, the order of the polynomial that is constant, linear, quadratic, or modified quadratic functions being viewed as the consequent part of fuzzy rules, and a collection of the specific subset of input variables. On the parameter optimization phase, we adopt Information Granulation (IC) based on HCM clustering algorithm and a standard least square method-based learning. Through the consecutive process of such structural and parametric optimization, an optimized and flexible fuzzy neural network is generated in a dynamic fashion. To evaluate the performance of the genetically optimized FSPNN (gFSPNN), the model is experimented with using the time series dataset of gas furnace process.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.2
• /
• pp.143-149
• /
• 2013

Purpose: Open reduction and internal fixation of calcaneal fracture using plate has been used. While numerous plates have been manufactured, most of the conventional plates are designed for westerners, realistically the size is larger for Korean. The domestic products, on the other hand, often have the undesirable screw holes and path. Therefore, we measured the radiologic parameter of Korean calcaneus for providing the plate and screw hole placements. Materials and Methods: We measured the outer lines and angles with over the 20 years old 291 females and 322 males. A: Length of inferior plane of calcaneus, B: Length of anterior plane of calcaneus, C: Length from line A to sinus tarsi, D: Length from line A to posterior point of posterior facet, E: Length from line A to calcaneal tuberosity, F: Length of posterior facet, G: Length from anterior point of line A to C, H: Length from line C to line D, a: Angle between A and B, b: Gissane angle, c: Bohler angle, d: Calcaneal pitch angle using Marosis m-view$^{(R)}$. Results: Mean A, B, C, D, E, F, G, H were 63.6, 26.4, 23.2, 43.7, 40.5, 26.9, 12.8, 18.1 mm. Mean a, b, c, d angle were 105.8, 122.4, 32.4, $20.5^{\circ}$. Male's calcaneus is significantly bigger than female's (p<0.001). Conclusion: AP calcaneus length 63.6 mm, maximal height 43.7 mm is considered to be helpful in making the Korean calcaneal plate.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.5
• /
• pp.295-304
• /
• 2012

Objectives: Lateral cephalometry, computed tomography (CT) and full-night polysomnography were used to examine the correlation of obstructive sleep apnea (OSA) severity. Materials and Methods: A total of 29 patients (5 females, 24 males) diagnosed with OSA were evaluated by lateral cephalometry, CT and full-night polysomnography. Lateral cephalometry was performed in the closed and open mouth states. The radiographic and polysomnography measurements of the patients with OSA were evaluated statistically to determine the association with OSA severity. Results: A significant relationship was observed between the increased respiratory disturbance index and closing lateral cephalometry. With mouth opening, the airway space narrowed and the OSA worsened. Lateral cephalometry revealed OSA patients to have an inferiorly positioned hyoid bone, longer-than-normal soft palate and narrowing airway space. As OSA was severe, the airway shape was ovoid in the CT horizontal view. Conclusion: Polysomnography and the radiographic parameter can be used for diagnosing OSA.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.741-752
• /
• 2009

As a major obstacle to active online purchase at the level of consumer in China, distrust is raised in this study. Most of previous studies showed that trust is a major variable to cause a relational unity between company and consumer, on the other hand, this study attempts to show that according to the two dimensional point of view regarding trust each dimension of both trust and distrust distinctly contributes to marketing achievement. Interaction, perceived popularity, information usefulness, perceived security risk and perceived dealing risk were created as preceding variable, trust and distrust were constituted as parameter and relation absorption and purchase intention as consequential variable. These variables were analyzed with structural equation modeling (SEM) in LISREL 8.3 program. The results for this study are as follows. First, relation between exchange actors in marketing is divided into two concepts of trust and distrust differently from the previous studies. On the assumption that trust and distrust might exist simultaneously and they would distinctly have an influence on marketing consequency such as relation absorption and repurchase intention, it is identified that trust and distrust are a different dimension in online context. Second, the formative factor of online trust-distrust is identified and it is shown what relationship between internet shopping mall and relation absorption and foregoing purchase intention resulting from online trust-distrust exists. Third, it is shown that in online context the formative factor of online trust-distrust is distinctly contributed to relation absorption and repurchase intention. It is suggested that trust needs to be managed two-dimensionally separating from trust and distrust. Fourth, it is shown that both trust and distrust factor in terms of relation absorption and repurchase intention of consumer in internet shopping mall are significant variables. Trust is linked with repurchase intention through relation absorption, however, distrust is not directly linked with repurchase intention through relation absorption. Thus, the ripple effect of distrust appears to be much higher than that of trust.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.2
• /
• pp.35-42
• /
• 2020

Recently the reusable launch vehicle is being a major trend in the worldwide space market, because a few commercial companies, especially SpaceX, are trying to cut down the launch price through developing and succeeding the reusable launch vehicles. However, there is still a big controversy about whether in view point of the launch cost which is more favorable between expendable and reusable. Therefore, a study and close examination is required for the launch cost in the early development phase of the reusable launch vehicle. In this study the sensitivity analysis is performed with respect to the major cost parameters which have great effects on the launch cost and price. The standard vehicle of this sensitivity analysis is the expendable vehicle having a payload 20 tons. The cost estimation relationships used in this calculation are referred from the commonly proven cost models such as TRANSCOST. The major cost parameters chosen in this study are as follows: development cost, production cost, refurbishment cost, and maximum reusable number.

• Architectural research
• /
• v.13 no.3
• /
• pp.11-18
• /
• 2011

With the rapid development of computer technology and ongoing destruction of traditional buildings, more and more attention is paid to digital methods for the design and preservation of traditional buildings. Unlike 2D methods, Building Information Modeling (BIM) provides an object-oriented and parametric digital representation way for traditional building components. However, one of the main limitations currently is that parametric information cannot be exchanged between BIM software packages. Therefore each kind of software must have their own parametric library which causes extensive works. In this research, the authors developed an open BIM-based library using an XML parametric approach to solve the above problems, represented traditional components according to an XML schema, and parametrically implemented these XML files in a browser which can be accessed by users for their easy component edit and selection. And then based on the XML file of one component, implemented an Add-on in ArchiCAD for users to parametrically edit and directly utilize. Thus based on these XML files, a browser for users' view and selection purpose and an add-on for users' application purpose were developed. Future research will focus on implementing these XML files in other BIM tools like Revit and Digital Project. If the whole library was to be completed based on this XML approach, an open BIM-based library would be established that all kinds of BIM software users could apply this parametric library for easy modeling of traditional houses.

• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.353-361
• /
• 1977

In this paper we propose a new theory of multilayer physical adsorption based on the view that a second or higher layer molecule will be adsorbed above the center of a square or triangular array of molecules, rather than on top of molecules themselves, in the next lower layer and the corresponding adsorption isotherm is derived. The derived isotherm contains three adjustable parameters; $v_m$ (monolayer capacity), q/$q_1$ (ratio of the molecular partition function for the second or higher layer vs. that for the first layer) and n (a parameter characterizing the piling pattern of adsorbed molecules). When applied to adsorption of argon on "Carbolac" carbon and nitrogen on Linde silica, excellent agreements between observed and calculated values are obtained up to p/$p_0$ = 0.8. In both cases n = 3 gives the best fit and this probably indicates that adsorbed molecules are piled up in a closest packing pattern.