• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.678-685
• /
• 2016

Deglutition inspection has been the gold standard for inspection of dysphagia using a penetration device of the division of radiology to date. However, inspection using an endoscope has facilitated diagnosis of dysphagia in recent days. In this study, we compared the results of VFSS alone with those of VFSS combined with FEES to determine if the detection rate of penetration, aspiration, and pharyngeal residue increased. This study evaluated at 130 persons who underwent both VFSS and FEES from December 2013 through March 2014, and used VFSS (FELAVISION, SHIMADZU) and FESS (EVIU LUCERA CV-260SL, OLYMPUS) as devices. After preparing barium diluted solution, yogurt that diluted barium and rice that diluted barium in 2.5 ml, 5 ml, 10 ml by modifying Logemann's protocol in part, and having subjects take the solution, this study confirmed pharyngeal residue, penetration, aspiration etc. VFFS and FEES using full HD video revealed aspiration in 36 of the 130 patients in both inspections. Additionally, aspiration was discovered in 36 patients upon VFFS, but in 41 upon FESS. Although FEES was more sensitive at diagnosing dysphagia, the two inspection methods are complementary, so diagnostic value will be greatly improved when the endoscope operating method and accurate fluoroscopic inspection are combined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1185-1194
• /
• 2012

This paper proposes a new terrestrial 3DTV broadcasting standard specification based on synchronization with non-real-time contents in order to overcome quality limitations of the current 3DTV services that are arisen from the limited bandwidth of the legacy broadcasting channel. In the services using the proposed specification, one view sequence of a stereoscopic video content is delivered as a non-real-time content in idle time, and the other view sequence is transmitted in real time broadcasting signal, thereafter two sequences are synchronized in a receiver for display. Thus, it is possible to provide higher-quality stereoscopic video content services than the current 3DTV services. In order to realize these services, a new mechanism is required which enables synchronization between the data that are from different transmission media and time. Therefore, this paper suggests a solution by multiplexing the synchronization signals of non-real-time contents into broadcasting signals with real-time streams together. This solution can provide a accurate synchronization mechanism by minimum updates of legacy broadcasting systems while maintaining compatibility with legacy services.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.74-85
• /
• 2020

Smart phone zombie or Smombie means pedestrians who walk without attention to their surroundings because they are focused upon their smart phone. Because the traffic accidents and injuries caused by Smombie have been increased rapidly in recent years, the social attention and policies are needed to prevent it. This study was conducted to analyze Smombie's current status and some solutions used before and to propose new improved method through the latest ICT trend. In this study, we did the field survey to check Smombies at several places in Seoul through people counting, and found that a lot of pedestrians still use the smart phone while walking. And we analyzed many case studies about some solutions to prevent Smombies previously. The case studies include legal regulations, government policies, smart phone app services and facilities that are used before. We studied them through internet searches and reference studies and we also checked the current operating situation as visiting several places that the solutions actually has been operated. Therefore, we found there are some limitations in previous solutions in terms of effectiveness and management. To consider new solution that can be expected to overcome the limitations, we analyzed the latest ICT trends focused on features to utilize the Smombie prevention, especially video recognition and digital signage. In these days, video recognition has been developed rapidly with assistance of AI technology and it can recognize the specific pedestrian's characteristics such as holding smart phone as well as hair style, clothes, backpack and etc. On the other hands, the digital signage is the convergence device that includes big display, network connection and various IoT sensors. It can be used as public media in many places for public services as well as advertising. Through these analysis results, we show the requirements and the user scenario for the improved method to prevent Smombie. Finally, we propose to develop R&D technology to recognize Smombie exactly as pedestrian attributes and to spread creative contents to increase pedestrian's interest and engagement for Smombie prevention through digital signage.

• Journal of Digital Convergence
• /
• v.18 no.7
• /
• pp.31-36
• /
• 2020

In recent years, increasing the variety of disasters and accidents that accompany large-scale damage. Disasters are accidents with uncertainty and have a direct impact on people's lives, safety and property protection. Therefore, it is necessary to establish and operate safety management systems such as prevention, response, and recovery for various disasters. Therefore, in this paper, a real-time disaster safety management solution in a smart environment was designed to systematically respond to disaster accidents. To this end, 1: 1 or 1: N situation propagation was performed to the situation room, related organizations, and experts through smart devices. Through this, the solution was configured to respond quickly and appropriately through multi-party information sharing and communication. In other words, we designed a solution that applied functions such as real-time and multi-party HD video transmission, mobile-type report management, voice / text situation propagation, location information sharing, recording and history management, and security.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• Archives of design research
• /
• v.17 no.2
• /
• pp.463-470
• /
• 2004

This paper studied tangible interaction design of VR platform and its applications that are economic In development process and cost, flexible by contents and installation conditions, and that has business potential for consumer market. The design solution uses video based virtual world and tangible interaction by motion tracking. Our platform enables a user to monitor their action and to collaborate with other users of remote place within attractive interaction feedback. We developed two design applications, Glass Xylophone 2003 and VR Class, in our platform. Glass Xylophone 2003 provides interactive music performance and helps self practice of glass xylophone. VR Class gives more serious distance learning experience with tutoring and group collaboration. They are presented in public exhibitions and tested by exhibition visitors. They showed application potential of this design solution in interactive game, distance learning, and entertainment field.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.6
• /
• pp.563-570
• /
• 2014

This paper purposes on stimulating the dynamic behavior of a floating structure model with the image processing and the close-range photogrammetry, instead of the contact sensors. Previously, the movement of structures was presented by the exterior orientation estimation from a single camera following the space resection. The inverse resection yields to 6 orientation parameters of the floating structure, with respect to the camera coordinates system. The single camera solution of interest in applications is characterized by the restriction in terms of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This paper discusses the theoretical determinations of camera exterior orientation by using the least squares adjustment, applied of the values from the DLT (Direct Linear Transformation) and the photogrammetric resection. This proposed method is applied to monitor motions of a floating model. The results of 6DOF (Six Degrees of Freedom) from the inverse resection were signified that applying appropriate initial values from DLT in the least square adjustment is effective in obtaining precise exterior orientation parameters. Therefore, the proposed method can be concluded as an efficient solution to simulate movements of the floating structure.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.25-30
• /
• 2017

The Connected House is a new type of IT convergence service that combines new communication services with existing IT systems such as M2M, NFC, smart home, and smart grid. It is a future connected life service that connects to any device anytime, anywhere. In this paper, we designed an intelligent gateway, a connected office solution for the Internet of things, which provides a connected life service for the future, and can control various sensors, ZigBee/Z-Wave/NFC and terminal devices. In addition, IP/SIP/IMS cameras and video door phones that are linked to the gateway have been developed to satisfy the quality standards of domestic communication service providers in terms of voice quality, jitter, and frame rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.35-57
• /
• 2014

Multi-criteria decision making (MCDM) algorithms play an important role in ensuring quality of service in an integrated HetNets (Heterogeneous Networks). The primary objective of this paper is to develop a multi-criteria vertical handoff decision algorithm (VHDA) for best access network selection in an integrated Wireless Local Area Network (WLAN)/Universal Mobile Telecommunications System (UMTS)/Worldwide Interoperability for Microwave Access (WiMAX) system. The proposed design consists of two parts, the first part is the evaluation of an Analytic Hierarchy Process (AHP) to decide the relative weights of handoff decision criteria and the second part computes the final score of the weights to rank network alternatives using Simple Additive Weighting (SAW). SAW ranks the network alternatives in a faster and simpler manner than AHP. The AHP-SAW mathematical model has been designed, evaluated and simulated for streaming video type of traffic. For other traffic type, such as conversational, background and interactive, only simulation results have been discussed and presented in brief. Simulation results reveal that the hierarchical modelling and computing provides optimum solution for access network selection in an integrated environment as obtained results prove to be an acceptable solution to what could be expected in real life scenarios.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.569-577
• /
• 2014

From the year 2009, 3D Stereoscopic movies and TV have been spotlighted after the huge success of a movie called "AVATAR". Moreover, most of 3D movies & contents are created by mixing real-life shots & virtual animated pictures, such as "Robocop 3", "Transformer 4" as shown in 2014. However, the stereoscopic 3D video film shooting with a traditional stereoscopic rig camera system, takes much more time to set the rig system and adjust the system setting for proper film making which necessarily resulting in bigger cost. In fact, these problems have depreciated the success of Avatar as decreasing demand for 3D stereoscopic video shooting. In this paper, inherent problems of traditional stereoscopic rig camera system are analyzed, and as a solution for the problems, a novel implementations of single-lens optical stereoscopic 3D camera system is suggested. The new system can be implemented to a technology for separating two lights when even those lights passing through in the same optical axis. The system has advantages of adjusting the setting and taking video compared with traditional stereoscopic 3D rig systems. Furthermore, this system can acquire comfortable 3D stereoscopic video because of the good characteristics of geometrical errors. This paper will be discussed the single-lens stereoscopic 3D camera system using rolling shutters, it will be tested geometrical errors of this system. Lastly, other types of single lens stereoscopic 3D camera system are discussed to develop the promising future of this system.