• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.765-772
• /
• 2002

초고층 건물의 가속도 레벨을 줄이기 위해서 TMD, TLD, VED와 같은 다양한 진동제어장치들이 많은 국내외 연구자들에 의해 연구되고 있다. TLD는 다른 제진장치에 비해 설치의 간편함 및 유지비용이 저렴한 장점이 있다. 그러나 물의 요동을 평가함에 있어서 어려움이 있으므로 동조액체댐퍼의 동적특성에 대한 실험 및 해석적 검증이 필요하다. 본 연구에서는 TLD를 100층 규모의 초고층건물에 설치할 경우를 상정하여 자유진동실험과 백색잡음을 이용한 강제진동실험을 통하여 TLD의 제진성능을 확인하고자 하였다. TLD의 질량비, 감쇠네트수, TLD 형상비 등을 주요실험변수로 설정하였으며, 물탱크를 설치한 건물의 반응값들이 건물 단독인 경우보다 적게 나타남을 알 수 있었다. 또한 질량비, 감쇠네트, 형상비가 커질수록 감쇠성능이 개선됨을 알 수 있었다.

• 국제초고층학회논문집
• /
• 제1권1호
• /
• pp.15-19
• /
• 2012

Occupant footfalls are often the most critical source of floor vibration on upper floors of buildings. Floor motions can degrade the performance of imaging equipment, disrupt sensitive research equipment, and cause discomfort for the occupants. It is essential that low-vibration environments be provided for functionality of sensitive spaces on floors above grade. This requires a sufficiently stiff and massive floor structure that effectively resists the forces exerted from user traffic. Over the past 25 years, generic vibration limits have been developed, which provide frequency dependent sensitivities for wide classes of equipment, and are used extensively in lab design for healthcare and research facilities. The same basis for these curves can be used to quantify acceptable limits of vibration for human comfort, depending on the intended occupancy of the space. When available, manufacturer's vibration criteria for sensitive equipment are expressed in units of acceleration, velocity or displacement and can be specified as zero-to-peak, peak-to-peak, or root-mean-square (rms) with varying frequency ranges and resolutions. Several approaches to prediction of floor vibrations are currently applied in practice. Each method is traceable to fundamental structural dynamics, differing only in the level of complexity assumed for the system response, and the required information for use as model inputs. Three commonly used models are described, as well as key features they possess that make them attractive to use for various applications. A case study is presented of a tall building which has fitness areas on two of the upper floors. The analysis predicted that the motions experienced would be within the given criteria, but showed that if the floor had been more flexible, the potential exists for a locked-in resonance response which could have been felt over large portions of the building.

• 한국포장학회지
• /
• 제26권2호
• /
• pp.113-118
• /
• 2020

Due to the rapid increase in cyber shopping mall of agricultural products, the parcel delivery service industry also increased, making it necessary to design an optimum packaging for agricultural products. And Due to the recent increase in strawberry consumption, there is also a need for a packaging system for parcel delivery service. In order to establish the criteria for optimum cushioning packaging design of strawberries, the bioyield strength of strawberries by storage time was measured through the ASABE test standards, and the peak acceleration in the resonance frequency and resonance frequency bands of strawberries was measured through the vibration test regulated in the ASTM test specifications. Tray cup pad and corrugated fiberboard box of delivery strawberries were designed using FEM theoretical analysis of contact stress and resonant frequency. In addition, an optimum packaging system was developed with a cushioning and vibration design considering the impact characteristics when distributing agricultural products. Through the performance evaluation and on-site evaluation of the optimum packaging system of strawberries for parcel delivery service, the random PSD test results of the delivery showed a 74% reduction in the acceleration level, and the actual distribution test of the delivery showed that the damage rate of strawberries was not more than 6.7%, indicating that it was possible to use the optimum packaging of strawberries for delivery.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.779-799
• /
• 2015

The slosh height and the possibility of water spill from rectangular Spent Fuel Storage Bays (SFSB) and Tray Loading Bays (TLB) of Nuclear power plant (NPP) are studied during 0.2 g, Safe Shutdown Earthquake (SSE) level of earthquake. The slosh height obtained through Computational Fluid dynamics (CFD) is compared the values given by TID-7024 (Housner 1963) and American concrete institute (ACI) seismic codes. An equivalent amplitude method is used to compute the slosh height through CFD. Numerically computed slosh height for first mode of vibration is found to be in agreement the codal values. The combined effect in longitudinal and lateral directions are studied separately, and found that the slosh height is increased by 24.3% and 38.9% along length and width directions respectively. There is no liquid spillage under SSE level of earthquake data in SFSB and TLB at convective level and at free surface acceleration data. Since seismic design codes do not have guidelines for combined excitations and effect of higher modes for irregular geometries, this CFD procedure can be opted for any geometries to study effect of higher modes and combined three directional excitations.

• 국제초고층학회논문집
• /
• 제6권3호
• /
• pp.227-235
• /
• 2017

This paper describes some of the challenges for structural design of a mid-story seismic isolated high-rise building, which is located near Tokyo station, completed in 2015. The building is a mixed-use complex and encompasses three volumes: one substructure including basement and lower floors, and a pair of seismic isolated superstructures on the substructure. One is a 136.5m high Main Tower (office use), and the other is a 98.5 m high South Tower (hotel use). The seismic isolation systems are arranged in the $3^{rd}$ floor of the Main Tower and $5^{th}$ floor of the South Tower, so that we call this isolation system as the mid-story seismic isolation. The primary goal of the structural design of this building was to secure high seismic safety against the largest earthquake expected in Tokyo. We adopted optimal seismic isolation equipment simulated by dynamic analysis to minimize building damage. On the other hand, wind-induced vibration of a seismic isolated high-rise building tends to be excited. To reduce the vibration, the following strategies were adopted respectively. In the Main Tower with a large wind receiving area, we adopted a mechanism that locks oil dampers at the isolation level during strong wind. In the South Tower, two tuned mass dampers (TMDs) are installed at the top of the building to control the vibration. In addition, our paper will also report the building performance evaluated for wind and seismic observation after completion of the building. In 2016, an earthquake of seismic intensity 3 (JMA scale) occurred twice in Tokyo. The acceleration reduction rate of the seismic isolation level due to these earthquakes was approximately 30 to 60%. These are also verified by dynamic analysis using observed acceleration data. Also, in April 2016, a strong wind exceeding the speed of 25m/s occurred in Tokyo. On the basis of the record at the strong wind, we confirmed that the locking mechanism of oil damper worked as designed.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1743-1750
• /
• 2001

This paper presents an analysis of nonlinear response of the seismically isolated structure against earthquake excitation to evaluate isolation performances of a rubber bearing. In the analysis of the vibration of building, the building is modeled by lumped mass system where the restoring force is considered as linear, bilinear and trilinear. Fundamental equations of motion are derived for the base isolated structure, and hysteretic and nonlinear-elastic characteristics are considered for a numerical calculation. The excitation levels are magnified fur the recorded strong earthquake motions in order to examine dynamic stability of the structure. Seismic responses (of the building are compared fur the each restoring force type. As a result, it is shown that the effect of the motion by the nonlinear response of the building is comparatively not so large from a seismic design standpoint. The responses of the isolated structures reduce sufficiently and controled the motion of the building well in a practical range. By increasing the acceleration of the earthquake, the yielding of the farce was occurred in the concrete and steel frame, which shows the necessity of the exact nonlinear dynamic analysis.

• 한국소음진동공학회논문집
• /
• 제18권7호
• /
• pp.764-774
• /
• 2008

A fire-out-of-battery(FOOB) mechanism, which is a new recoil technology, can reduce dramatically the level of a recoil force compared to the conventional recoil system. The FOOB mechanism pre-accelerates the recoil parts in direction opposite of conventional recoil before ignition. This momentum of the recoil parts due to pre-acceleration can reduce the firing impulse. In this paper, the dynamics of the recoil system with this FOOB mechanism is formulated and simulated numerically. The results of the simulation show that the FOOB system can reduce the recoil force and stroke compared to the conventional system under normal condition. When the fault modes happen, the FOOB system may not perform well and may be damaged seriously due to excessive recoil force and stroke. Hence, the control of the fault modes is necessary to achieve the normal operation of the FOOB system. The results that an additional MR damper enables the FOOB system to perform well under all firing condition.

• 대한토목학회논문집
• /
• 제35권2호
• /
• pp.255-264
• /
• 2015

SC (steel plate concrete)구조는 새로운 구조형식으로서 SC구조물의 내진설계에 적용할 수 있는 감쇠비의 규명이 필요하다. 이 연구에서는 실험적 방법을 통해 SC구조의 감쇠비를 분석하였다. 연구를 위하여 SC 전단벽 시편을 제작하고, 대형 진동대를 이용하여 진동시험을 수행하였다. 시험에서 계측한 가속도응답신호는 전달함수로 변환한 후 동적실험모드분석기법을 적용하여 분석하였다. 구조물의 감쇠비는 입력운동의 수준에 따라 달라질 수 있으며, 이 연구의 실험에서 적용한 입력운동의 수준은 시편의 항복강도의 절반보다 낮은 수준으로서 여기서 분석된 구조감쇠비는 약 4%정도이다. 이 연구결과를 고려하여 SC구조물의 운전기준지진에 대한 내진설계에는 4% 감쇠비를 적용할 수 있을 것으로 판단된다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1320-1327
• /
• 2013

In this paper, two different electromagnetic energy harvesters using bulk micromachined silicon spiral springs and Polydimethylsiloxane (PDMS) packaging technique have been fabricated, characterized, and compared to generate electrical energy from ultra-low ambient vibrations under 0.3g. The proposed energy harvesters were comprised of a highly miniaturized Neodymium Iron Boron (NdFeB) magnet, silicon spiral spring, multi-turned copper coil, and PDMS housing in order to improve the electrical output powers and reduce their sizes/volumes. When an external vibration moves directly the magnet mounted as a seismic mass at the center of the spiral spring, the mechanical energy of the moving mass is transformed to electrical energy through the 183 turns of solenoid copper coils. The silicon spiral springs were applied to generate high electrical output power by maximizing the deflection of the movable mass at the low level vibrations. The fabricated energy harvesters using these two different spiral springs exhibited the resonant frequencies of 36Hz and 63Hz and the optimal load resistances of $99{\Omega}$ and $55{\Omega}$, respectively. In particular, the energy harvester using the spiral spring with two links exhibited much better linearity characteristics than the one with four links. It generated $29.02{\mu}W$ of output power and 107.3mV of load voltage at the vibration acceleration of 0.3g. It also exhibited power density and normalized power density of $48.37{\mu}W{\cdot}cm-3$ and $537.41{\mu}W{\cdot}cm-3{\cdot}g-2$, respectively. The total volume of the fabricated energy harvesters was $1cm{\times}1cm{\times}0.6cm$ (height).

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.103-113
• /
• 2004

위성은 조립 및 시험 완료 후 운반 및 발사 순간부터 임무 궤도로 진입할 때까지 발사체에 의한 정하중, 동하중 및 충격하중을 겪게 되며, 임무궤도에서 열진공, 복사 및 미세중력 환경하에 놓이게 되어 위성의 설계, 제작, 조립 및 시험 시 이들 발사환경과 우주환경을 고려하여 개발을 수행하여야 한다. 본 논문에서는 HAUSAT-1 피코위성의 구조 열해석과 설계 결과를 논의하고, 발사 과정과 우주에서 겪게 되는 환경을 모사한 발사환경 및 우주환경시험의 결과를 논의한다. HAUSAT-1 위성의 기계시스템은 인증 수준의 진동시험과 열진공시험 후에도 안정하다는 것을 확인하였다.