• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.21-34
• /
• 1988

Machinery enclosures are widely adopted to reduce the noise emission in various fields of application. Emitted noise, which is due to the vibration of enclosure's outer surface, is composed of two kinds of sound with different path of propagation. One is the "structure-borne sound", while the other is "air-borne sound". In order to get a most efficient machinery enclouser a prudent consideration upon the above structure-borne and air-borne sound is required, as the guiding principle of contermeasure for each noise is quite different. The controlling of input vibration and its isolation are major subjects for the structure-borne sound, and the specifications of absorbing members and damping panels are the major related matters for the air-borne sound. Hence, it seems very efficient to separate the total sounds into two categories with a great accuracy when one think of further reduction of noise from the existing enclosure, although its separating methods have not been made clear for many years. Author proposes an application method of experimental modal analysis to extract the structure-borne sound from the measured total radiation sound, as the air-borne sound is deduced by the vectorial difference between the measured total radiation sound and the calculated structure-borne sound. In order to calculate the correct structure-borne sound by the excitation at an arbitrary point on the enclosure structure, it is important to decide 1) how to estimate the enclosure's surface vibration velocity and 2) how to compute the radiation sound which is considered as the effect of vibration modes of enclosure surface. The former can be solved with total frequency response function calculated by the application of experimental modal analysis. The latter is to be solved by the author's new approaches for radiation sound computation by means of the Rayleigh's integral equation and the boundary-element method applied complex surface vibration velocity. As a first step, structure-borne sound by the excitation at an arbitry point on the rectangular plate with fixed edges, has been calculated to verified the reliability of the developed computation methods. The results of calculation show good agreements with those of the actual measurements.actual measurements.

• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.62-73
• /
• 2001

구조물의 진동인텐시티를 파악하면 진동에너지 전달경로와 소산기구 및 주된 기진원의 위치 등을 규명할 수 있어 구조물 진동의 효율적 저감 대책을 수립할 수 있다. 본 연구에서는 선박, 해양구조물 등과 같은 대형 복잡한 구조물의 진동인텐시티를 유한요소법으로 해석할 경우 적정한 모델링 기법을 마련하고자 선체의 기본 부재인 평판과 보강판에 대해 유한요소 모델링을 달리 하면서 진동인텐시티 해석을 수행하고, 그 결과를 고전적 근사해법인 assumed mode method에 의한 결과와 비교 검토하였다. 이로부터 유한요소법을 이용하여 판 구조물의 진동인텐시티 크기 및 방향을 정확하게 산정하기 위해서는 고유진동 또는 강제진동 해석의 경우보다 세밀한 유한요소 모델링이 요구되지만 진동에너지 전달경로 규명 등을 위한 정성적 해석은 강제진동해석을 정확하게 할 수 있는 정도의 유한요소 모델로도 가능함을 확인하였다. 아울러, 두께가 다른 평판 구조물, L-자형 판 구조물 및 3차원 box-girder에 대한 진동인텐시티 해석을 수행하여 다양한 선체 국부 구조물에 있어서의 진동에너지 전달 현상을 고찰하였다.

• 한국압력기기공학회 논문집
• /
• 제17권2호
• /
• pp.145-156
• /
• 2021

Ultrasonic Nanocrystal Surface Modification (UNSM) is a peening technology that generates elastic-plastic deformation on the material surface to which a static load of a air compressor and a dynamic load of ultrasonic vibration energy are applied by striking the material surface with a strike pin. In the UNSM-treated material, the structure of the surface layer is modified into a nano-crystal structure and compressive residual stress occurs. When UNSM is applied to welds in a reactor coolant system where PWSCC can occur, it has the effect of relieving tensile residual stress in the weld and thus suppressing crack initiation and propagation. In order to quantitatively evaluate the compressive residual stress generated by UNSM, many finite element studies have been conducted. In existing studies, single-path UNSM or UNSM in a limited area has been simulated due to excessive computing time and analysis convergence problems. However, it is difficult to accurately calculate the compressive residual stress generated by the actual UNSM under these limited conditions. Therefore, in this study, a minimum finite element peening analysis area that can reliably calculate the compressive residual stress is proposed. To confirm the validity of the proposed analysis area, the compressive residual stress obtained from the experiment are compared with finite element analysis results.