• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.766-771
• /
• 2005

To compare blasting vibration at blasting construction field in urban area, the vibration level (dB(V)) and vibration velocity (cm/sec) on the ground and the structure of buildings due to the differences of the measuring sites from the blasting source is investigated and the difference between the measured vertical vibration level and the calculated vibration level by using vibration velocity PVS and the correlation between vibration velocity and vibration level and is studied in the thesis.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.4 no.2
• /
• pp.52-59
• /
• 2004

The interest about noise and vibration which occurs in buildings is increasing by a living level elevation recently. Particularly, the vibration which occurs from the elevator cage of the building is possibility of damage to the users of the building continuously. So, the purpose of this study is to suggest of measuring results to the vibration that occurs from the elevator cage and propose the countermeasure of it.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.200-207
• /
• 2001

The transmission of harmonic vibratory power form a vibrating rigid body into a supporting plate through passive and active isolators is investigated theoretically and experimentally. The theoretical model allows for the transmission of vertical and horizontal harmonic forces and moments about all three coordinate sun. The experiment is to use vibration actuators attached to the intermediate mass of the two-stage mount to minimize the rotational and translational vibration of the intermediate mass. The performance is done by measuring the vibration at the error sensors due to the primary vibration source and measuring the transfer functions from the control sources to the error sensors. Results show that over a frequence range from 1 to 100Hz, transmission into the supporting plate can be reduced substantially by employing in parallel with existing passive isolators, active isolators adjusted to provide appropriate control force amplitudes.

• Journal of the Korea Concrete Institute
• /
• v.12 no.3
• /
• pp.77-85
• /
• 2000

Various concretes are used for construction works depending on the types of structure, building element and method of construction. An internal vibration work is one of the important processes for adequately pouring various concrete into a certain form. This study was undertaken to find out the effects of internal vibration on flowability of fresh concrete by concrete flow test under eight conditions of vibration. Presumable equation models also were created to show all vibration effects without regard to kinds of concrete. As the results of this study, the degree of vibration effects were varied according to the properties of concrete. Acceleration amplitude of vibration that applied to fresh concrete was effective value of the properties of vibration in a viewpoint of flowability. Moreover, This research presents the presumed equation models including variables created by acceleration amplitude and measuring value of vibrated concrete flow test. These models are presumable methods of vibration effects regardless of kinds of concrete.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2009

In this study, the nose of cam in the automobile engine was modelled into circular disk to analyze the torsional vibration of the cam shaft. The distance between disks was fixed, but the diameter of disks was changed. The torsional vibration of the cam shaft was studied experimentally by the motion of the modelled disk with changing the disk diameter. And the sizes of the modelled disk were selected not to show the natural frequencies over all the experimental ranges. The torsional vibration meter used in this study has a laser system with non-contact measurement method, which can measure both torsional angular vibration velocity and torsional angular vibration displacement simultaneously. The Experimental analysis shows that the characteristics of the torsional vibration in the horizontal rotating shaft can be considerably affected by the arrangement of the modelled disks.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.751-752
• /
• 2014

센서를 사용한 구조물의 진동측정 시 여러 문제로 인해 사용의 제약을 받아왔다. 이를 극복 하고자 최근 카메라를 이용한 진동 측정 기술이 연구되고 있지만 보통 산업용 카메라의 낮은 샘플링 주파수로 인해 구조물의 진동 측정에 한계를 보였다. 이러한 문제를 해결하기 위하여 본 연구에서는 라인 스캔 카메라의 높은 샘플링 주파수를 이용한 진동 측정 기술을 제안하고 실험을 통하여 성능검증을 수행하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.362-369
• /
• 2002

This paper mainly propose the new passive vibration control device, named BRV(the bridge reduced vibration), for reducing excessive traffic-induced vibration of bridges and for measuring performance of BRV numerical example was simulated. The purpose of BRV is mainly on reducing vertical acceleration and displacement of bridge. In BRV we can control the stiffness and damping coefficient to accept the performance we want. The result of simulation showed that the vertical acceleration and displacement was effectively diminished. It would be concluded that BRV can be used to improve the serviceability of bridge and fatigue life etc.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.270-277
• /
• 2009

This paper deals with a vibration and efficiency characteristics of Permanent Magnet Linear Synchronous Motor according to the PM arrangement. The generated force such as the thrust, detent force, normal force and lateral force are compared with analysis values and experimental ones. Furthermore characteristics of vibration and efficiency are estimated by experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1356-1360
• /
• 2001

A number of calibration methods are described in ISO 16063 (revision of ISO 5347) and they may be used for special purposes. However, the use of a laser interferometer is recommended for primary calibration. This paper introduces the primary vibration calibration by measuring displacement amplitude and frequency using laser interferometry.

• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.226-233
• /
• 2013

Self-diagnosis, regular examination, completion examination and precise safety examination on an elevator offer primary sources for evaluating performance and stability of the elevator. as critical examination for operating the elevator. The items on vibration of an elevator in the self-diagnosis and safety examination are not especially specified but vibration itself is considered as essential element to provide diverse analysis data. There is the equipment "EVA-625" for measuring vibration of an elevator. It is operated by reading data via computer and analyzing data by skilled engineer. This study aims to design and realize software to analyze data collected through the LabVIEW, a graphic program language and hardware for receiving data measuring vibration of an elevator by using 3-Axis acceleration sensor.