• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.940-948
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 948 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to 1.7~2.8 $m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were 7.1~10.8 $m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were 3.3~11.1 $m/s^2$. Workers using a impact wrench were exposed to 1.5~1.6 $m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplace to control vibration was not much different from the past because there are no vibration exposure limit.

• 소음진동
• /
• 제10권2호
• /
• pp.299-305
• /
• 2000

In this study, the characteristics of transmitted vibration on hand-arm system are examined when operating electric hand tools. Also through the correlation analysis between anthroponetric data and transmitted vibration, and comparison study with appropriate amount of work done based on the ISO criteriaa, the basic data for the ergonomic work design can be presented. The types of electric tools and works for the experiment are drill (general type and impact type), grinder, wire brush and steel to analyze the characteristics of transmitted vibrations, the amount of transmitted vibrations in X, Y and Z direction at tool(T), hand(H), wrist(W), and the joint between foream and upper arm(A) were measured at the frequency range of 6.3∼1000[HZ]. Also, the limit of human exposure to vibration, and the response of frequency were conducted.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.831-840
• /
• 2013

The noise levels of workers in tunnel sites are likely to be high because tunneling work places are confined space. However, research on the noise exposure levels of tunneling workers have not been performed intensively due to restricted accessibility to tunnel construction sites. The aim of this study is to evaluate the noise exposure levels for workers engaged in tunneling work sites. Noise dosimeters were used for monitoring workers' noise exposure level in 5 tunneling work sites in accordance with the Notification of the Ministry of Labor. Among 5 tunneling work sites, 4 of them used NATM tunneling method and 1 work site used shield TBM tunneling method. The average noise exposure levels of NATM tunneling workers was 81.1 dB(A) and 15.4 % of the workers' noise level were exposed more than 90 dB(A) which is the exposure limit value. In Shield TBM tunneling method, 4.3 % of the workers were exposed more than 90 dB(A) of noise level, the average noise exposure levels of TBM tunneling workers was 84.1 dB(A).

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.91-99
• /
• 2006

Fatigue properties of INVAR/AW wires have been investigated under the heat exposure in order to ensure stable operation and to estimate life span of their power line. In the case of heat exposure for 10000 hr, fatigue life and limit increased. For further heat exposure, fatigue limit decreased due to the decrease in yield strength. The variation fatigue of strand wire was strongly dependent on its amplitude. Also, cracks in wires of 7 strands were caused by stress concentration at the outer surface and fretting between each wire during vibration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.911-916
• /
• 2005

Noise map is a presentation of existing data or predicted noise situation in terms of noise indicator. However, it has shortcoming for assessing the number of people exposed, or the number of dwellings affected to any relevant limit values of noise level in certain areas. In this study, so called over-ride value noise mapping is proposed to make up for the shortcoming by using over-ride function of object-oriented programming and it is to show the guard of the area where it is satisfied the standard of option, or it is not satisfactory. Over-ride value noisemap data is combined with topography layer, population and house statistics, and GIS space statistical analysis. The over-ride value noise mapping can also he applied to make the road traffic noisemap, the railroad noisemap, the aircraft noisemap, and the industrial site noisemap This can express noise damage information more exactly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.7-9
• /
• 2014

An auditory experiment was conducted to establish annoyance criteria for floor impact noise in apartment buildings. Heavyweight floor impact sounds were recorded using an impact ball; the impact sound pressure level (SPL) together with the temporal decay rate (DR), which is quantified by the dB drop per second, was analyzed. For the experiment, A-weighted exposure levels of the heavy-weight floor impact sounds ranging 34~73 dB were evaluated at 3 dB intervals. Participants used a 7-point verbal scale to evaluate the level of annoyance from floor impact noise. The results show that the annoyance increases with increasing impact SPL and decreasing DR. Consequently, a classification and an acceptable level of floor impact sounds were proposed.

• 대한인간공학회지
• /
• 제32권4호
• /
• pp.321-331
• /
• 2013

Objective: The aim of this study is to review the literatures on the regulation, standard and guideline for the human vibration in Korea and other countries. Background: This review can be used to prevent various diseases caused by the human vibration as a basis for the development of the policy. Results: In Korea, the general employers' duties related to human vibration are set forth the Health Measures(Article 24) in the Occupational Safety and Health Act. And then an employer shall take measures to protect the health of the workers concerned by improving other working conditions relating to working hours for the vibration prevention measures referred to in Article 24 of the Act. The European Union adopted a Directive in 2002 on minimum requirements for the health and safety of workers exposed to vibration. New Regulations on Vibration at Work will be introduced in Great Britain on 2005 to implement the Directive. In the U.S., both ANSI and ACGIH adopted the ISO standard for measurement and suggested exposure action and limit values. In Japan, the Ministry of Labor decided that the vibration syndrome among operators of rock drills and riveters etc. could be included in an occupational disease(1947). In addition, ISO standard was based on proposals and draft documents of many countries such as U.K, Japan and European, etc. Conclusion: In Korea, Occupational Safety and Health Act prevent vibration to health, but do not include exposure limits. It is therefore important to consider the new duties regarding to vibration risks added to the general duties.

• 해양환경안전학회지
• /
• 제13권4호
• /
• pp.107-112
• /
• 2007

선박에서 발생하는 진동은 여객의 안락감을 결정하거나 승조원의 근무환경에 미치는 영향이 크므로 매우 중요하다. 선박에서 발생하는 진동은 선박의 속도를 좌우하는 추진방식의 발달과 가장 밀접한 관계가 있다. 이와 갈이 추진력을 발생하기 위하여 선박의 기관실에는 디젤엔진의 연속적인 폭발과정에서 기인하는 강력한 진동이 발생하게 된다. 진동이 인체에 미치는 피해는 생리적인 피해와 심리적인 피해로 발생하게 된다. 진동 환경에 인체가 노출되는 경우, 선내의 진동에 대한 평가는 국제표준화지침인 ISO 6954:2000(E)에 의해 정하고 있다. 본 연구에서는 선박에서 진동이 인체에 미칠 수 있는 영향을 평가하기 위해 ISO 6934:2000(E)에서 규정하는 지침에 의해 선박진동의 영향이 가장 큰 기관실, 기관제어설, 각종선실 및 선교 등에서 발생하는 진동의 크기를 측정 비교하여 평가한다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 추계학술발표회
• /
• pp.139-144
• /
• 2007

선박에서 발생하는 진동은 여객의 안락감을 결정하거나 승조원의 근무환경에 미치는 영향이 크므로 매우 중요하다 선박에서 발생하는 진동은 선박의 속도를 좌우하는 추진방식의 발달과 가장 밀접한 관계가 있다. 이와 같이 추진력을 발생하기위하여 선박의 기관실에는 디젤엔진의 연속적인 폭발과정에서 기인하는 강력한 진동이 발생하게 된다. 진동이 인체에 미치는 피해는 생리적인 피해와 심리적인 피해로 발생하게 된다. 진동 환경에 인체가 노출되는 경우, 선내의 진동에 대한 평가는 국제표준화지침인 ISO 6954:2000(E)에 의해 정하고 있다. 본 연구에서는 선박에서 진동이 인체에 미칠 수 있는 영향을 평가하기위해 ISO 6954:2000(E)에서 규정하는 지침에 의해 선박진동의 영향이 가장 큰 기관실, 기관제어실, 각종선설 및 브리지 등에서 발생하는 진동의 크기를 측정 비교하여 평가한다.

• Safety and Health at Work
• /
• 제6권4호
• /
• pp.268-278
• /
• 2015

Background: This study aimed to assess the whole-body vibration (WBV) exposure among large blast hole drill machine operators with regard to the International Organization for Standardization (ISO) recommended threshold values and its association with machine- and rock-related factors and workers' individual characteristics. Methods: The study population included 28 drill machine operators who had worked in four opencast iron ore mines in eastern India. The study protocol comprised the following: measurements of WBV exposure [frequency weighted root mean square (RMS) acceleration ($m/s^2$)], machine-related data (manufacturer of machine, age of machine, seat height, thickness, and rest height) collected from mine management offices, measurements of rock hardness, uniaxial compressive strength and density, and workers' characteristics via face-to-face interviews. Results: More than 90% of the operators were exposed to a higher level WBV than the ISO upper limit and only 3.6% between the lower and upper limits, mainly in the vertical axis. Bivariate correlations revealed that potential predictors of total WBV exposure were: machine manufacturer (r = 0.453, p = 0.015), age of drill (r = 0.533, p = 0.003), and hardness of rock (r = 0.561, p = 0.002). The stepwise multiple regression model revealed that the potential predictors are age of operator (regression coefficient ${\beta}=-0.052$, standard error SE = 0.023), manufacturer (${\beta}=1.093$, SE = 0.227), rock hardness (${\beta}=0.045$, SE = 0.018), uniaxial compressive strength (${\beta}=0.027$, SE = 0.009), and density (${\beta}=-1.135$, SE = 0.235). Conclusion: Prevention should include using appropriate machines to handle rock hardness, rock uniaxial compressive strength and density, and seat improvement using ergonomic approaches such as including a suspension system.