• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.61-68
• /
• 1987

The main objective of this paper is to develop the computer-aided vibrational signal processing and monitoring system of rotating machinery. This system has an automatic data acquisition capability and analyze for machine fault diagnosis. By spectrum analysis, machine’s failure can be identified. The monitoring system enables diagnosis of the fault in rotating machinery. In this study, the conventional electrical fans are selected as a model case. The date processing and fault monitoring system proposed here can be applied to the automation of the inspection process in assembling motor-shaft systems. The automatic inspection can enhance the product quality and keep it stable. Since the proposed system is developed for personal computers, it might be cheap in cost and easy in installation.

• 대한기계학회논문집A
• /
• 제32권7호
• /
• pp.556-560
• /
• 2008

As higher reliability and accuracy on production facilities are required to detect incipient faults, a diagnostic system for predictive maintenance of the facility is highly recommended. In this paper, we present a study on the application of vibration signals to diagnose faults for a Rotating Machinery using the Mahalanobis Distance-Taguchi System. RMS, Crest Factor and Kurtosis that is known as the Statistical Methods and the spectrum analysis are used to diagnose faults as parameters of Mahalanobis distance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.455-460
• /
• 2007

A self-sensing circuit for piezo inkjet has been designed in order to monitor the operating condition during printing. In order to verify the circuit, both ink droplet images from strobe LED and vibration signals from the laser vibrometer were measured and compared with self-sensing signal. Experimental results show that self-sensing signal was effective in detecting the pressure wave change due to the bubble trapped in inkjet printhead.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.350-354
• /
• 1995

The Tension Leveller of Cold Rolling Mill In POSCO performs levelling the strip in high speed line. But minor variations in operating condition of driving machines such as motor, gear box, and support bearings, a small gap-variation of supporter and strip slip by poor roll revolutions can cause serious problems in the quality of strip. In this study, firstly, A condition monitoring standard for each sensor is made through with the detail analysis of vibration and strip slip. Secondly, An automatic monitoring and diagnosing system was developed to monitor the condition of Tension Leveller, and diagnose the cause of abnormal condition. Finally, A diagnosing algorithm for abnormal condition and man-machine interface (MMI) for easy operation are developed.

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.558-563
• /
• 2010

In this paper, the novel approach for the fault diagnosis of the bearing equipped with rotational mechanical facilities was studied. As research works, by applying the ball bearing used extensively in many industrial fields, experiments were conducted in order to propose the new prognostic method about the condition monitoring for the rotational bodies based on the condition analysis of infrared thermography. Also, by using the vibration spectrum analysis, the real time monitoring was performed. As results, it was confirmed that infrared thermography method could be adapted into monitor and diagnose the fault for bearing by evaluating quantitatively and qualitatively the temperature characteristics according to the condition of the ball bearing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.261-264
• /
• 2000

This paper presents a method to identify the on-set of chatter by using the chatter frequency-spindle speed diagram for a milling spindle-workpiece system in face milling process. To this purpose, the eigenvalue problem approach using frequency response function is adopted for predicting both the chatter condition and chatter frequency. The chatter frequency -spindle speed diagram for various conditions is investigated throughout simulation and experiment to diagnose the chatter. The simulation and experimental results show that the chatter frequency-spindle speed diagram is useful for diagnosis of the on-set of chatter vibration.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.110-123
• /
• 1994

The development of automatic production systems have required inteligent diagnostic and monitoring function to repair system failure and reduce production loss by the failure. In order to perform accurate functions of intelligent system, inferencing about total system failure and fault analysis due to each mechanical component failures are required. Also the solution about repair and maintenance can be suggested from these analysis results. As an essential component of mechanical system, a bearing system is investigated to define the failure behavior. The bearing failure is caused by lubricant system failure, metallurgical defficiency, mechanical condition(vibration, overloading, misalignment) and environmental effect. This study described roller bearing fault train due to stress variation and metallurgical defficiency from lubricant failure by using FTA.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.11-16
• /
• 2004

In this study, the characteristics of signals such as acoustic emission, vibration amplitude and noise level which are derived from the abnormal condition of compressor are investigated. The normal condition, vane stick sound and roller defect condition are chosen to analyze the signal in each cases. From the feature extraction of each signals, the dominant parameters of each signals which can identify the abnormal condition are suggested.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.64-74
• /
• 2002

The SSEP(SomatoSensory Evoke Potentials) test is a valid and repeatable technique which correlates with clinically assessed joint position & vibration sense, skin touch & pressure sense. Also SSEP study is a simple and quantitative test, and has been used to evaluate the sensoty system along the somatosensory pathway from peripheral sensory receptor to the cortex. The ascending pathway of SSEP has been know to be posterior column-lemniscal pathway, but not without controversy. There are two kind of test mathods : one of test is median nerve SSEP and other test is posterior tibial nerve SSEP. Recently, SSEP used to performed to evaluate the usefulness of dermatomal SSEP(D-SSEP) and segmental SSEP(5-SSEP) for the diagnosis of lumbasacral radiculopathy, and it can be measure of ingual ahd palatine evoked potentials & indicator of medullary function useful for the diagnosis of brain death.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.291-295
• /
• 2012

In the industrial field, real-time monitoring system like a fault early detection is very important. For this, the infrared thermography technique as a new diagnosis method is proposed. This study is focused on the damage detection and temperature characteristic analysis of ball bearing using the non-destructive infrared thermography method. In this paper, thermal image and temperature data were measured by a Cedip Silver 450 M infrared camera. Based on the results, the temperature characteristics under the conditions of normal, loss lubrication, damage, dynamic loading, and damage under loading were analyzed. It was confirmed that the infrared technique is very useful for the detection of the bearing damage.