• Progress in Superconductivity and Cryogenics
• /
• v.11 no.3
• /
• pp.26-30
• /
• 2009

Korea Superconducting Tokamak Advanced Research(KSTAR) device is composed of 30 superconducting magnets, magnet structure, vacuum vessel, cryostat, current feeder system, and etc. KSTAR device is operated in the cryogenic temperature and high magnetic field. We install about 800 sensors - temperature sensors, stain gages, displacement gages, hall sensors - to monitor the thermal, mechanical, electrical status of KSTAR during operation. As a tremendous numbers of sensors should be installed for monitoring the KSTAR device, the method of effective installation was developed. The sensor test was successfully carried out to check its reliability and its reproduction in the cryogenic temperature. The sensor signal is processed by PXI-based DAQ system and communicated with central control system via machine network and is shown by Operator Interface(OPI) display in the main control room. In order to safely operate the device, any violations of mechanical & superconductive characteristic of the device components were informed to its operation system & operator. If the monitored values exceed the pre-set values, the protective action should be taken against the possible damage. In this paper, the system composition, operation criteria, operation result were presented.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1734-1744
• /
• 2015

Majority of marine accidents that occur on fishing vessels are engine accidents. This comprises more than 26 % of the total annual fishing vessel marine accident cases. Large numbers of engine accidents happen in the cooling water system, which are mostly caused by negligence on regular check-up and repair. Notably, small-sized ships have higher engine accidents occurrence rate compared to medium-and large-sized ships. Based on the Report of the Korea Ship Safety Technology Authority, engine accident cases reached 3,032 out of the total 3,081 cases. This study researches on the differences between the small-sized ship pilot, an operator of a vessel engine of less than 200 tons, and a 6th level marine engineer, in terms of the relationship between management forms and what causes the marine accidents in association with the cooling water system. It also studies and analyzes the differences in frequency of the accident occurrence between the two groups. ${\chi}^2$ qualification was imposed through the SPSS statistical analysis program and it got qualified at the significance level of 5%. The research shall be utilized as one of the base line data for the reduction of marine accidents.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.168-172
• /
• 2014

In this paper, we propose an algorithm that can efficiently detect and monitor multiple ships in real-time. The proposed algorithm uses morphological operations and edge information for detecting and tracking ships. We used smoothing filter with a $3{\times}3$ Gaussian window and luminance component instead of RGB components in the captured image. Additionally, we applied Sobel operator for edge detection and a threshold for binary images. Finally, object labeling with connectivity and morphological operation with open and erosion were used for ship detection. Compared with conventional methods, the proposed method is meant to be used mainly in coastal surveillance systems and monitoring systems of harbors. A system based on this method was tested for both stationary and non-stationary backgrounds, and the results of the detection and tracking rates were more than 97% on average. Thousands of image frames and 20 different video sequences in both online and offline modes were tested, and an overall detection rate of 97.6% was achieved.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.173-180
• /
• 2018

Marine casualties of small fishing vessels (SFV) of less than 20 tons are frequent in Korea. The analysis was conducted to identify the cause and then prepared reduction plan using the marine casualty statistics of fishing vessels for the last five years from 2012 to 2016 by the Korean Maritime Safety Tribunal to reduce the marine casualties of SFV. According to the analysis of the type of whole vessels occurring marine casualty, fishing vessels accounted for an average 68.0 %; moreover, except for 2014 when M/V SEWOL ferry capsizing occurred, the rate of death and missing due to marine casualties occurred from 68.3 % to 91.2 % in fishing vessels, and an average 79.5 % was found to be urgent need of a measure. Marine casualties occurrence depending on the gross tonnage of fishing vessel was found that the most occurred at less than 5 tons, followed by the order of 5 to 10 tons or less. However, crews who boarded on SFV do not have any training program for them, except for the fishing safety training of fisher who carry out fishing for shipowners and crew of the coastal and offshore fishing vessel in accordance with the safety regulations for fishing vessels in the Fisheries Cooperative Association. Therefore, it is necessary to revise the training program so as to improve the preventive action and then emergency response including the fishing safety compliance with each fishery, safe navigation, machinery inspection and emergency response. Also, an SFV of less than 5 tons of 56,000 vessels is boarded by unqualified fishers. It would also be possible to consider subdividing small boat operator's certificate to enhance their qualifications. It is expected that marine casualties of SFV will be reduced if active efforts are made to improve the safety consciousness of fisher and shipowners as well as the reorganization of fishing safety training and the small boat operator's certificate system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.314-323
• /
• 2022

Vessel Traffic Services (VTS) operators perform traffic management tasks using VTS systems and sensor equipment designated as VTS facilities to promote the safety and efficiency of vessel traffic. The necessary VTS information for effective operations could be obtained through the additional access of various information channels other than the designated VTS facility. To unify these various information access windows, the development of the VTS cloud system is in progress. In this study, the operational information analysis for VTS was performed through VTS tasks-facility linkage analysis to identify the user required information according to the introduction of the VTS cloud system. The VTS task analysis was performed through research of the international and domestic literature, and expert interviews. The necessary information were identified and linked according to the VTS facilities. As a result of the analysis, 37 categories of necessary information were identified for internal and external information windows, and 8 information windows were selected other than the present VTS equipment. The identified user requirements would be applied to the structure design of the VTS cloud system. In the future, it is necessary to update user requirements through scenario-based user operation analysis and to conduct additional research on the system interface design.

• Nuclear Engineering and Technology
• /
• v.30 no.5
• /
• pp.403-415
• /
• 1998

The CANDU 6 reactor assembly consists of an array of 380 pressure tubes, which are installed horizontally in a large cylindrical vessel, the Calandria, containing the low pressure heavy water moderator. The pressure tube is located inside the calandria tube and the annulus between these tubes, which forms a closed loop with $CO_2$ gas recirculating, is called the Annulus Gas System(AGS). It is designed to give an alarm to the operator even for a small pressure tube leak by a very sensitive dew point meter so that he can take a preventive action for the pressure tube rupture incident. To judge whether the operator action time is enough or not in the design of Wolsong 2,3 & 4, the Leak Before Break(LBB) assessment is required for the analysis of the pressure tube failure accident. In order to provide the required data for the LBB assessment of Wolsong Units 2, 3, 4, a series of leak detection capability tests was performed by injecting controlled rates of heavy water vapour. The data of increased dew point and rates of rise were measured to determine the alarm set point for the dew point rate of rise of Wolsong Unit 2. It was found that the response of the dew point depends on the moisture injection rate, $CO_2$ gas flow rate and the leak location. The test showed that CANDU 6 AGS can detect the very small leaks less than few g/hr and dew point rate of rise alarm can be the most reliable alarm signal to warn the operator. Considering the present results, the first response time of dew point to the AGS $CO_2$ flow rate is approximated.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.2
• /
• pp.1-15
• /
• 2000

In world trade, the vessel traffic in major routes has been congested due to the rapid increase of cargoes and shipping tonnages. The patterns of vessel traffic have also been complicated and diversified. Therefore it was necessary that the Vessel Traffic Service(VTS) should be established in order to enhance the safety of navigation, to prevent the loss of life and damage to the environment. The first advanced radar surveillance system(LevelIII-VTS) was introduced in Pohang, Korea in 1993 and in 13 other ports later. While the hardware of Korea VTS is equal to that of an advanced country, the software, specially the operation manual, the recruitment and education of VTS operator, and the VTS service area is behind that of Russia, USA, Germany, Hong Kong, Singapore and others. After researching and investigating. the VTS equipment and service area of many countries, and analyzing the IMO regulations relevant to VTS and the traffic pattern and accident of Pohang port, the most efficient VTS service area should be established in Pohang. According to the analysis of the preceding studies and research on VTS, the worldwide VTS areas are recognized under the following conditions: First, the service area should be extended over at least radar coverage taking into account of traffic flow, traffic density, the degree of danger to navigation and harbour condition in order to provide all possible services. Second, the established service area should be subdivided and systematized to render reliable VTS services, such as the allocation of VHF frequency and reporting procedure in each area. In conclusion, the VTS service area of Pohang must be established and operated over 10 miles from shore(radar site) covering the radar coverage, so as to include the area of traffic congestion and high density traffic flow.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.286-292
• /
• 2017

The Coastal VTS will be continuously constructed to prevent marine traffic accidents in the coastal waters of the Republic of Korea. In order to provide the best traffic information service to the ship operator, it is important to understand the navigation risk factor. In this study, we analyzed the navigational hazards of Gunsan coastal area where the coastal VTS will be constructed until 2020. For this purpose, major traffic flows of merchant ships and density of vessels engaged in fishing were analyzed. This study was conducted by Automatic Identification System (AIS) and Vessel Pass (V-PASS) data. The grid intervals are 10 minute ${\times}$ 10 minute (latitude ${\times}$ longitude) based on the section of the sea. A total of 30 sections were analyzed by constructing a grid. As a result of the analysis, the major traffic flows of the merchant vessels in the coastal area of Gunsan were surveyed from north to south toward Incheon, Pyeongtaek, Daesan, Yeosu, Pusan and Ulsan, and from east to west in the port of Gunsan Port, 173-3, 173-6, 173-8, 183-2, 183-5, 183-8, 183-3, 184-1 and 184-2. As a result of the study, the fishing boats in Gunsan coastal area mainly operated in spring and autumn. On the other hand, the main traffic flow of merchant ships and the distribution of fishing vessels continue to overlap from March to June, so special attention should be paid to the control during this period.

• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.212-219
• /
• 2023

Vessel Traffic Service (VTS) area presents a complex traffic pattern due to ships entering or leaving the port to utilize port facilities, as well as ships passing through the coastal area. To ensure safe and efficient management of maritime traffic, VTS operators continuously monitor and control vessels in real time. However, during periods of high traffic congestion, the workload of VTS operators increases, which can result in delayed or inadequate VTS services. Therefore, it would be beneficial to predict traffic congestion and congested areas to enable more efficient traffic control. Currently, such prediction relies on the experience of VTS operators. In this paper, we defined vessel traffic congestion from the perspective of a VTS operator. We proposed a method to generate traffic networks using historical navigational data and predict traffic congestion and congested areas. Experiments were performed to compare prediction results with real maritime data (Daesan port VTS) and examine whether the proposed method could support VTS operators.