• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.352-359
• /
• 2018

As a fuel for ship propulsion, liquefied natural gas (LNG) is currently considered a proven and reasonable solution for meeting the IMO emission regulations, with gas engines for the LNG-fueled ship covering a broad range of power outputs. For an LNG-fueled ship, the LNG bunkering process is different from the HFO bunkering process, in the sense that the cryogenic liquid transfer generates a considerable amount of boil-off gas (BOG). This study investigated the effect of the temperature difference on boil-off gas (BOG) production during ship-to-ship (STS) LNG bunkering to the receiving tank of the LNG-fueled ship. A concept design was resumed for the cargo/fuel tanks in the LNG bunkering vessel and the receiving vessel, as well as for LNG handling systems. Subsequently, the storage tank capacities of the LNG were $4,500m^3$ for the bunkering vessel and $700m^3$ for the receiving vessel. Process dynamic simulations by Aspen HYSYS were performed under several bunkering scenarios, which demonstrated that the boil-off gas and resulting pressure buildup in the receiving vessel were mainly determined by the temperature difference between bunkering and the receiving tank, pressure of the receiving tank, and amount of remaining LNG.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.637-642
• /
• 2013

In this paper, an analysis results of towing force and towing points which are dominating factors to determine the behavior of towed ship are introduced. The towing force and towing points to achive the desired posture and its position of the towed vessel are derived based on simplified dynamics and linearization method. LQR algorithm for posture control is applied to linearized system and numerical simulation is also executed. Force based on COG(cneter of gravity) and gain of controller to achieve desired posture for target vessel are obtained by using Riccati matrix equation and pseudo inverse matrix is applied to analyze the relation between the derived force and its towing point. Based on this analysis method, towing force need to move the towed vessel from its initial position to target position can be calculated. The towing method including towing point and direction is also considered on this method. Finally, the relation between towing force and towing point is confirmed from the analysis and the results can be applied to arrangement of tug boats during salvage works.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.73-80
• /
• 2011

The present study deals with the propeller design for the standard new propeller series so called KF Series for 52ton class fishing vessel. The MAU or B series have been usually used for the fishing vessel's propeller, which are to be improved in consideration of the efficiency as well as the cavitation point of view. The high technology of propeller design has been applied to the design of 52ton class fishing vessel's propeller in the present study. The new designed series propellers will be validated by the experimental results whose data will be also used for the new series chart.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.147-154
• /
• 2020

The questionnaire survey was carried out to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) to the onsite specialist, such as a fishing master, chief engineer and fisher in stow net fishing vessel from June to July 2018. The results are as follows. A total of 134 cases were surveyed, including 53 cases in Yeosu, 44 cases in Mokpo, 30 cases in Boryeong and 7 cases in Gunsan. Approximately 60% of the respondents on board the stow net fishing vessel were more than 20 years old, and the boarding experience was seasoned and suitable for the respondents. In the 4M analysis by safety accident factor during fishing work, the mechanical factors included 51 cases (25.0%) of decrepit equipment or poor maintenance and 49 cases (24.0%) of systemic error of fishing equipment. The environmental factors exhibited 71 cases (33.5%) of poor communication by mixed manning of foreign fishermen and 63 cases (29.7%) of poor environment such as heavy weather etc. The human factors showed 78 cases (37.3%) of personnel's carelessness and 45 cases (21.5%) of unskillfulness of operating net and haulers. The management factors exhibited 59 cases (32.1%) of work practice of poor safety precautions and 56 cases (30.4%) of inadequacy of education on hazard factor. The results are expected to contribute to the creation of a safe operating environment for stow net fishery, such as a fisher boarding a stow net fishing vessel, enabling the analysis of major causes of working safety accidents by cause.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.67-73
• /
• 2021

The purpose of this study is to obtain a safe area for a passing vessel between anchored vessels by developing a model to predict the collision risk, frequent collisions occur between the anchored vessel and the passing vessel through the anchorage. For this, this study selected the southern anchorage of Busan port, which is the largest harbor in Korea, as the target area and extracted and analyzed VTS (Vessel Traffic Service) data during the period in which anchored vessels were the most waited. The ratio of D/L for each bearing was obtained to determine the safe distance (D) passes based on the length (L) of the passing vessel between anchored vessels. Based on the average domain of the D/L ratio distribution, the percentage of anchored vessels within the scope of the pre-studied ship's domain was analyzed to obtain a domain reflecting the degree of risk of VTSOs. Further research will evaluate and analyze the collision risk of a passing vessel using Domain-watch, the minimum safe distance between anchored vessels, and the safe domain of a passing vessel through anchorage, to develop a model for VTS to manage anchorages more efficiently and safely.

• Journal of Korea Fishing Vessel Association
• /
• v.26
• /
• pp.52-57
• /
• 1986

• Journal of Korea Fishing Vessel Association
• /
• v.24
• /
• pp.21-25
• /
• 1985

• Journal of Korea Fishing Vessel Association
• /
• v.23
• /
• pp.22-28
• /
• 1985

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.3
• /
• pp.269-277
• /
• 2015

Compressed natural gas (CNG) composite vessels for vehicles have been generally made of 34CrMo4 for a inner liner part and E-glass/epoxy for a composite layer part. But, there is a problem of material loss of CNG composite vessels used in vehicles due to the design of excessive thickness of the liner. And, light weight of the CNG composite vessel is required for improving fuel efficiency. In this study, optimal design for CNG composite pressure vessel was performed by using basalt fiber, which is the environment-friendly material having a good mechanical strength. The optimal thickness of each part (inner liner and composite layer) was determined by theoretical analysis and FEA for satisfying structural safety and lightweight of the vessel. Also, for improving fatigue life, optimal autofrettage pressure was derived from FEA results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.284-291
• /
• 1997

A hydrogen liquefaction equipment by direct cooling has been designed and built at KIST. Cool-down characteristics and liquefaction performance of the equipment have been investigated. The hydrogen liquefaction equipment consists of a GM refrigerator, a liquefaction velssel, a radiation shield and a cryostat. It is found that the hydrogen starts to be liquefied in the liquefaction vessel after 40~50 minutes of cool-down from the gas state of 270K. The effect of natural convection phenomena of charged gas in liquefaction vessel on the cool-down characteristics is evaluated by comparing with those in vacuum of liquefaction vessel. It is seen that the cool-down time of a liquefaction vessel is substantially increased in vacuum environment of liquefaction vessel. The experiments have been performed for 1~5 atm of hydrogen pressure to investigate the influence of hydrogen pressure on the liquefaction rate and figure of merit(FOM). It is found that both liquefaction rate and FOM are increased as the charged hydrogen pressure is increased.