• 수산해양기술연구
• /
• 제59권4호
• /
• pp.336-343
• /
• 2023

The aging fishery training vessels from the past have mostly been decommissioned, and many universities are introducing state-of-the-art large fishery training vessels. The purpose of these training vessels is to train marine professionals and above all, safety to prevent marine accidents should be of utmost priority as many students embark on the vessel. This study estimated the impact of the hydrodynamic interaction forces acting on the model vessel (fishery training vessel) from the bank when the vessel pass near the semi-circle bank wall in various conditions through the numerical calculation, especially concerning maneuvering motions of the vessel. For estimation, variables were mainly set as the size of the semi-circle shape, the lateral distance between the bank and the model vessel, and the depth near the bank. As a result, it was estimated that, in order for the model vessel to safely pass the semi-circle bank wall at a speed of 4 knots, the water depth to the vessel draft ratio should be 1.5 or more (approximately 8 m of water depth), and the lateral distance from the semi-circle bank wall should be 0.4 times the model vessel's length (L_pp) or more (a distance of 34 m or more). Under these conditions, it was expected that the model vessel would pass without significantly being affected by the bank wall.

• Ocean and Polar Research
• /
• 제39권3호
• /
• pp.221-232
• /
• 2017

The purpose of this study is to estimate the extent of fisheries resource rebuilding and other economic effects on coastal gill-net fishery as a result of the Korean vessel buy-back program using with-without analysis based on methods estimating sustainable yields for all species caught by coastal gill-net fishery. Based on the results of with-without analysis, maximum sustainable yields (MSY) of all species caught by coastal gill-net fishery have been increased by the Korean vessel buy-back program. In addition, profits per vessel of maximum economic yield (MEY) of the species have been improved by the program. Further, yields and a producer surplus per vessel under an equilibrium of open access (OA) have increased because of the program. In detail, first of all, at the MSY level, the vessel buy-back program has led to about 21% fisheries resource recovery, and at the MEY level, it has led to about a 19% resource recovery. Secondly, at the MEY level and the OA level, the producer surplus per vessel has been increased by about 24% and 22% respectively by the vessel buy-back program.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.127-132
• /
• 2001

An experimental study on penetration integrity of the reactor vessel has been performed under external vessel cooling during a core melt accident. In this study a series of experiments are performed for the verification of the effects of coolant in the annulus between the ICI(In-Core Instrumentation) nozzle and the thimble tube and also the effects of external vessel cooling on the integrity of the penetration using the test section including only one penetration and $Al_{2}O_{3}$ melt as a corium simulant. The experimental results have shown that penetration is more damaged in the case of no external vessel cooling compared with the case of external vessel cooling. It is preliminarily concluded that the external vessel cooling is very effective measure for the improvement of the penetration integrity. Also it is confirmed from the experimental results that the coolant in the annulus reduces the melt penetration distance through the annulus and enhance the integrity of the reactor vessel penetration in the end.

• 한국지능시스템학회논문지
• /
• 제25권3호
• /
• pp.293-298
• /
• 2015

해상교통상황에서 수집된 선박 조우(Encounter) 데이터 변수는 선박 충돌 및 근접사고(Near-Collision) 위험도를 통계적인 방법에 의한 분석이 가능하다. 본 연구에서는 선박 조우 데이터에서 추출되는 다수의 선박충돌위험도 평가 변수들을 요인분석(Factor Analysis)하여, 선박 조우데이터에서 충돌위험에 영향을 미치는 주요 요인을 결정하고자 한다. 각 요인 결정을 위해 선박조우데이터 변수 정규분포화 및 표준화를 수행한 후 주성분 분석(Principal Component Analysis)으로 요인을 결정하였다. 요인분석결과 선박 근접도 요인과 충돌회피변화요인으로 요약하였다.

• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.935-946
• /
• 2000

Elastic-plastic stress analysis has been performed to evaluate the fatigue life of an autofrettaged pressure vessel containing cross-bores subjected to pulsating internal pressure of 200 MPa. Finite element analyses were used to calculate the residual and operating stress distributions of the pressure vessel due to the autofrettage process and pulsating internal pressure, respectively. Theoretical stress concentration factors of 3.06, 2.58, and 2.64 were obtained at the cross-bore of the pressure vessel due to internal pressure, 50%, and 100% autofrettage loadings, respectively. Local stresses and local strains determined from the elastic-plastic finite element analysis were employed to calculate the failure location and fatigue life of the pressure vessel with radial cross-bores, incorporating the low-cycle fatigue properties of the pressure vessel steel and fatigue damage parameters. Increase in the amount of overstrain by autofrettage process moved the crack initiation location from the inner radius toward a mid-wall, and extended the crack initiation life. Predicted fatigue life of the fully autofrettaged pressure vessel with cross-bores increased about 50%, compared to the unautofrettaged pressure vessel. At the autofrettage level higher than 50%, the failure location and fatigue life of the pressure vessel were not significantly influenced by the autofrettage level.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권1호
• /
• pp.24-28
• /
• 2020

Heat leakage is an important parameter to reflect heat insulated performance of cryogenic vessel. According to the current standard requirements, it needs to measure the daily evaporation rate to indicate heat leakage. The test needs-over 24h after cryogenic vessel in heat equilibrium as standard required, therefore test efficiency is poor and new efficient method is required to cut test time. First of all, the volume of instantaneous evaporated gas and heat leakage are calculated by the current standard corresponding to the maximum allowable daily evaporation rate of cryogenic vessel. Depending on the relationship between real daily evaporation rate and maximum allowable daily evaporation rate of cryogenic vessel, we designed a new test method based on the pressure changes over time in cryogenic vessel to determine whether its heat insulated performance meets requirements or not. Secondly, the heat transfer process was analyzed in measurement of cryogenic vessel, and the heat transfer equations of whole system were established. Finally, the test was completed in four hours; meanwhile the heat leakage and daily evaporation rate of cryogenic vessel are calculated basing on test data.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.96-96
• /
• 2009

The purpose of this study is to clarify the transitional behavior and main factor of excessive welding distortion caused by fabrication process of STS 304 vacuum vessel having double curvature for the efficient quality control of vacuum vessel. In order to do it, the predictive equations of the welding distortion in simple weldment of vacuum vessel were established by conventional finite element analysis. And the principal factor controlling the welding distortion was identified by evaluating the welding distortion of vacuum vessel in each fabrication process with FEA and simplified thermo elastic method. Based on the results, the principal factors of distortion of vacuum vessel were clarified as angular distortion and transverse shrinkage which are a source of excessive out-of plane distortion in the double curved vacuum vessel. It was expected that the FE analysis results of this study could contribute to establish the proper control method of welding distortion for double curved vacuum vessel.

• 수산경영론집
• /
• 제50권1호
• /
• pp.17-37
• /
• 2019

The purpose of this study is to estimate the resource recovery effect and the economic effect of the fishermen by the fisheries vessel buy-back program. First, this study standardizes the fishing efforts of coastal gill net, coastal trap, and coastal composite fisheries using Gavaris general linear model. Second, the resource evaluation is performed by using vessel buy-back program data, and also the CYP model based on exponential growth function is applied. In order to derive the effect of the vessel buy-back program, the MSY with the vessel buy-back program is compared with the MSY without the vessel buy-back program. Finally, we compare and analyze producer surplus under the equilibrium of the MEY and the OA using bioeconomic model. In conclusion, the vessel buy-back program has shown an increase in resource growth and economic improvement for the remaining fishermen. The result shows that the remaining fishermen are able to obtain an increase in producer surplus of about 53% due to the vessel buy-back program under equilibrium levels of the open access and the maximum economic yield.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.7-13
• /
• 2019

Recently, an automobile market used to natural gas has emerged as fast-growing as the several countries, who holds abundant natural fuel resources, has promoted to supply the national agency for an automobile car. LNG fuel vessel is more efficient in another way as the energy density is high, but it requires a high technology and investment to maintain extreme low temperature. CNG fuel vessel are relatively low-cost alternative to LNG, but poorly economical in terms of energy density as well as showing safety issues associated with compressed pressure. The development of adsorbed natural gas (ANG) has emerged as one of potential solutions. Therefore, it is desirable to reduce the weight of vessel by applying light-weighed a composite carbon fiber in order to response to the regulation of $CO_2$ emission. Herein, this study make the prototype ANG vessel not only based on the optimal design and analysis of material characteristic but also based on the shape design, and it suggest a new type for the composite carbon fiber vessel which verified functional test. Moreover, the detail shape design is analyzed by a finite element analysis, and its verifies the ANG vessel.

• 대한토목학회논문집
• /
• 제34권4호
• /
• pp.1251-1259
• /
• 2014

본 연구에서는 산재되어 있는 부산항 입출항 선박의 개별 활동도(정박 접안 특성) 및 선박제원 정보를 기존 항만운영정보시스템(PORT-MIS) DB에 연계 구축하기 위한 방법론을 제시하고, 연계 구축된 3가지 DB를 이용하여 18개월(2009.01~2010.06) 동안 부산항에 입출항한 선박의 온실가스 배출량을 산정하여 그 결과를 비교 분석하였다. 본 연구에서는 선박의 기본 활동도 변수만을 포함하고 있는 저해상도의 L-PORT-MIS DB에 각 선박의 정박시간 자료를 추가하여 중해상도의 M-PORT-MIS DB를 연계 구축하였으며, 각 선박의 온실가스 배출량에 직접적인 영향을 주는 엔진출력 등과 같은 선박제원 정보를 연계시켜 고해상도의 H-PORT-MIS DB를 구축하였다. 각 활동도 DB를 이용한 선박의 온실가스 배출량 산정결과, 선박 활동도의 해상도가 높아질수록 총 온실가스 배출량은 감소하는 것으로 분석되었다. 구체적으로 저해상도 및 중해상도의 선박 활동도 자료를 이용할 경우에는 과거에 집계화된 정박 및 접안 특성에 의존하여 온실가스 배출량이 과다 산정되는 반면, 고해상도의 선박 활동도 자료를 이용할 경우에는 각 선박의 개별 접안 정박 특성과 엔진출력이 고려되는바 H-PORT-MIS DB를 이용한 선박의 온실가스 배출량은 보다 신뢰성 높은 추정치로 판단된다. 이처럼 부산항을 입출항하는 개별 선박의 특성을 반영하여 온실가스 배출량을 산정했을 경우 그 추정치는 기존 추정치와 매우 달라질 수 있어 실효성 있는 온실가스 저감대책 수립을 위해서는 본 연구에서 제안한 DB의 연계 구축이 시급하다.