• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.613-619
• /
• 2017

최근의 초대형 컨테이너선들은 점차 거대화되고 있으며, 흘수의 증가로 인한 연안해역 및 항만 등과 같은 저수심 수역에서의 안전항해에 많은 주의가 필요하다. 이러한 저수심 해역을 항행하는 초대형 컨테이너선은 정수중 뿐만 아니라 파랑중에서의 선박 운동 특성을 파악하여야 할 필요가 있다. 저수심 해역에서는 특히 선박의 상하운동에 의한 스쿼트 현상이 안전 항해의 중요한 평가 요소가 될 수 있으며, 수평방향으로 작용하는 파표류력은 선박의 조종성능에 미치는 영향이 매우 크다고 할 수 있다. 본 연구에서는 저수심 해역을 항행하는 초대형 컨테이너선을 대상으로 선박에 수직방향으로 작용하는 파랑강제력과 수평방향으로 작용하는 파표류력에 대하여 전산유체역학에 의한 수치시뮬레이션을 실시하였다. 그 결과 천수역에서 정수중 전저항 값이 큰 폭으로 증가하고 있는 것을 알 수 있었다. 파랑중 단파장 영역보다는 장파장 영역이 될수록 수심과 관계없이 파표류력은 작아지고 있는 모습을 보여주고 있다. 또한 파랑강제력은 천수역에서 다른 수심의 유체력 값에 비해 상당히 크게 작용하고 있는 것을 확인할 수 있었다. 그리고 선체중앙 부분의 파고는 낮아지고 선미쪽 파고는 더욱 높아지는 현상을 파악할 수 있었다.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.65-72
• /
• 2010

Some structural members of large-scale marine vessels such as large-scale offshore structures and very large container ships are assembled by very thick plates of which thickness exceeds 60mm. Also, high-tensile steels have been selected to meet the required structural strength and fatigue strength. Generally, multi-pass welding method such as FCA(Flux-Core Arc) welding has been used to join the thick plates. Considering the welding residual stresses, fatigue strength of the welded joints of thick plates should be assured since the residual stress influences the fatigue strength. This paper presents a numerical procedure to investigate the residual stress of structure joined by multi-pass FCA welding so that it can be incorporated into the fatigue strength assessment considering the effect of welding residual stress. The residual stress distribution is also measured by X-Ray diffraction method. The residual stress obtained by the computational model also has been compared with that of experiment. The results of FEA are in very good agreement with the experimental measurements.

• 해운물류연구
• /
• 제34권4호
• /
• pp.545-563
• /
• 2018

본 연구의 목적은 VLCC(Very Large Crude Oil Carrier) 운임에 영향을 미치는 주요 결정요인의 장기적 탄성치를 추정하는 것이다. 이를 위해 본 연구는 영국 해운 전문 기업인 클락슨이 공표하는 연간 VLCC 운임을 종속변수로, 원유(Crude oil) 물동량, VLCC 선복량, 벙커유 가격, Libor 금리를 설명변수로 사용하였다. 본 연구는 벡터오차수정모형(Vector Error Correction Model; VECM)을 사용하여 운임 결정 장기균형함수를 추정하였으며, 추정결과 물동량 1.0% 증가 시 운임 6.4% 증가, 선복량 1.0% 증가 시 운임 1.9% 감소, 벙커유 가격 1.0% 증가 시 운임 0.3% 감소, 금리 1.0% 증가 시 운임은 0.18% 증가하는 것으로 나타났다. 벙커유 가격의 경우 일반적인 직관과 반대되는 마이너스(-) 부호로 계수가 추정되었는데, 이는 설명변수 중 벙커유 가격이나 금리 등의 2차 변수가 운임에 미치는 영향력은 적은 반면 직접적인 수급 변수가 운임을 결정하는 주요 요인이기 때문인 것으로 이해된다. 후속연구에서 컨테이너선, 건화물선 등 다른 선종들을 대상으로 연구를 수행하고 다양한 선종별 운임의 결정요인을 비교 분석하는 것이 필요하다.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.160-169
• /
• 2012

Flux Cored Arc Welding (FCAW) is a common practice to join thick plates such as the structural members of large scale offshore structures and very large container ships. The objective of this study was to investigate the mechanical properties and variability of the fatigue crack initiation life in the flux cored arc welded API 2W Gr.50 steel joints typically applied to offshore structures with a focus on the effect of the materials in fatigue crack growth life from the notch root of a compact tension specimen. Offshore structural steel (API 2W Gr.50) plates (60-mm thick) were used to fabricate multi-path flux core arc welded butt welded joints to clearly consider fatigue fractures at the weld zone from the notch. Fatigue tests were performed under a constant amplitude cyclic loading of R = 0.4. The mean fatigue crack initiation life of the HAZ specimen was the highest among the base metal (BM), weld metal (WM), and heat affected zone (HAZ). In addition, the coefficient of variation was the highest in the WMl specimen. The variability of the short fatigue crack growth rates from the notch tips in the WM and HAZ specimens was higher than in BM.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.629-636
• /
• 2010

A Mobile Harbor is a new transportation platform which can load and unload has containers to and from very large container ships on the sea. Currently designed Mobile Harbor a catamaran type which is equipped with precisely controlled gantry crane on the deck, and can transport 250 TEUs at a time. Loading and unloading works by crane require very small motion of Mobile Harbor in waves, because it may be operated outside of harbors. In this project, applicability of both tuned-type anti-rolling tank and maglev-type active mass driver is studied as anti-rolling systems.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.408-409
• /
• 2011

2010년 1사분기 환적물동량에 비하여 2011년 동 분기 부산항 환적물동량은 8.43% 증가하였다. 이렇게 환적물동량이 증가하고 있는 가운데, 중소형 부두(이하 피더부두)를 활용한 운영 효율을 활성화하기 위하여 부산 신항 서컨부두 남측과 호란도 지역을 포함하여 6개 선석이 개발 계획 중이다. 따라서 본 연구는 초대형 컨테이너선을 접안할 수 있는 부두와 환적화물을 처리 할 수 있는 피더부두와 연계하여 개발 계획 중인 부산 신항의 피더부두 6개 선석에 대한 운영 활성화 방안에 대해 시사점을 도출하고자 한다.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.60-67
• /
• 2015

The compressor is used for many fields not only in the industrial sector, but also as a general household product. The energy consumption required for the compressor operation is very large. The reciprocation compressor is widely used as an air compressor. Regarding the reciprocating air compressor, the discharge of the gas compacted by the method of compressing the gas by using the oscillation of the piston is generated by the piston reciprocation 1 church 1 number. When compressing after compressing the air by the oscillation of the piston, the marine reciprocating air compressor is the vibration generated in the compressor and surrounding structure due to the energy of the generated inertia. If the effect of these harmful elements can be reduced, it supports the service of the vessel. In addition, accidents generated by the noise of the vibration can be prevented. Therefore, in this research, firstly, the structural analysis of the piston part was performed, the safety factor in all results was drawn based upon this, and the reliability of the interpretation was examined in order to create the optimal design for the air compressor.

• 한국항만경제학회지
• /
• 제17권2호
• /
• pp.29-59
• /
• 2001

This paper aims to describe port competition in East Asia and the Korean government's port strategy. In doing so, the paper provides an overview of global changes in international trade, the shipping industry and the port business. It also delineates the status of port competition in the region. Particular examples are taken from the competition among the ports of Hong Kong, Singapore, and Malaysia, as well as those of Pusan and Kwangyang, Kaohsiung, Kobe, and Shanghai and Yantian. The port competition in East Asia is reviewed and classified in two groups: north-tier competition among traditional major players, such as Kobe and Pusan, and dark horses such as Shanghai, Kwangyang and perhaps Yokohama; and south-tier competition among the three traditionally big players Kaohsiung, Hong Kong and Singapore, and the relative newcomers of Yantian in China, and Tanjung Pelepas In Malaysia. Due to the enlarging of ships and expansion of port activities, the boundary between the two tier frontiers breakdown, or they may even merge, into one grand frontier, in the foreseeable future. Although it appears that Asian ports are not being very aggressive in preparing for the future of mega-carrier in their plans, it is true that China, Korea and Taiwan are moving full steam ahead in comprehensively developing their container ports on a large scale. It therefore seems to be the perfect time for rival ports to explore a port alliance strategy to fight against the trend toward alliances between of many shipping lines.

• 한국해양공학회지
• /
• 제26권5호
• /
• pp.73-80
• /
• 2012

It is well known that a considerable amount of scatter is shown in experimental results relating to fatigue crack growth even under identical and constant amplitude cyclic loading conditions. Moreover, flux cored arc welding (FCAW) is a common method used to join thick plates such as the structural members of large scale offshore structures and very large container ships. The objective of this study was to investigate the macro- and microscopic observations of the fatigue crack growth (FCG) behavior of the FCAWed API 2W Gr. 50 steel joints typically applied for offshore structures. In order to clearly understand the randomness of the fatigue crack growth behavior in the materials of three different zones, the weld metal (WM), heat affected zone (HAZ), and base metal (BM), experimental fatigue crack growth tests for each of five specimens were performed on ASTM standard compact tension (CT) specimens under constant amplitude cyclic loading. Special focus was placed on the fatigued fracture surfaces. As a result, a different behavior was observed at the macro-level, depending on the type of material property: BM, HAZ, or WM. The variability in the fatigue crack growth rate for WM was higher than that of BM and HAZ.

• 한국항해항만학회지
• /
• 제34권4호
• /
• pp.271-279
• /
• 2010

The Mobile Harbor(MH) is a new transportation platform that can load and unload containers to and from very large container ships in the sea. This loading and unloading by crane can be performed with only very small movements of the MH in waves because MH is operated outside of the harbor. For this reason, an anti-rolling tank(ART) and an active mass driving system(AMD) were designed to reduce MH's roll motion, especially at the natural frequency of MH. In the conceptual design stage, it is difficult to confirm the design result of theses anti-rolling devices without modeling and simulation tools. Therefore, the coupled MH and anti-rolling devices' dynamic equations in waves were derived and a simulation program that can analyze the roll reduction performance in various conditions, such as sea state, wave direction, and so on, was developed. The coupled equations are constructed as an eight degrees of freedom (DOF) motion that consists of MH's six DOF dynamics and the ART's and AMD's control variables. In order to conveniently include the ART's and AMD's control dynamics in the time domain, MH's radiated wave force was described by an impulse response function derived by the damping coefficient obtained in the frequency domain, and wave exciting forces such as Froude-Krylov force and diffraction force and nonlinear buoyancy were calculated at every simulation time interval. Finally, the roll reduction performances of the designed anti-rolling devices were successfully assessed in the various loading and wave conditions by using a developed simulation program.