• 대한조선학회논문집
• /
• 제36권1호
• /
• pp.90-98
• /
• 1999

감쇠가 적은 금속 구조물의 공진에 의한 진동과 소음을 제어하기 위해 고무, 아스팔트 계열 등의 점탄성 물질이 다양하게 사용되고 있다. 일반적으로 점탄성재료를 이용한 감쇠처리는 점탄성재료의 하부를 모재인 금속층에 취부하고 점탄성재료의 상부를 구속층으로 적층하는 방법을 적용한다. 구속감쇠층이 취부된 구조물의 감쇠 및 강성 특성은 온도와 주파수뿐만 아니라 각 층의 두께에 따라 크게 달라진다. 따라서 구조물을 경량화하고 감쇠처리 효과를 극대화하기 위해서는 점탄성층과 구속층 두께의 최적설계가 매우 중요하다. 본 연구에서는 구속감쇠층을 가진 보의 점탄성층과 구속층의 두께 변화에 따른 손실계수의 변화를 면밀히 검토하고, 이를 토대로 지정된 손실계수를 가지되 감쇠층과 구속층의 최소두께를 결정하는 방법을 제시하였다. 제시된 방법의 타당성은 수치실험적 방법으로 검증하였다.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.43-48
• /
• 2017

In recent years, the demand for ships and offshore platforms that can navigate and operate through the Arctic Ocean has been rapidly increasing due to global warming and large reservoirs of oil and natural gas in the area. Winterization design is one of the key issues to consider in the robust structural safety design and building of ships that operate in the Arctic and Sub-Arctic regions. However, international regulations for winterization design in Arctic condition regulated that only those ships and offshore platforms with a Polar Class designation and/or an alternative standard. In order to cope with the rising demand for operating in the Arctic region, existing and new Arctic vessels with a Polar Class designation are lacking to cover for adequate winterization design with HSE philosophy. Existing ships and offshore platform was not designed based on reliable data based on numerical and experiment studies. There are only designed as a performance and functional purposes. It is very important to obtain of reliable data and provide of design guidance of the anti-icing structures by taking the effects of low temperature into consideration. Therefore, the main objective of this paper reconsiders anti-icing design of aluminum helideck using the heating cable. To evaluate of reliable data and recommend of anti-icing design method, various types of analysis and methods can be applied in general. In the present study, finite element method carried out the thermal analysis with cold chamber testing for performance and capacity of heating cables.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.75-81
• /
• 2008

The water shortage in mega cities in Asia, which face a rapid growth in urban population, is an outstanding problem. It is important, therefore, to accurately estimate the water balance in each city in order to use the limited water resources effectively. In this study, we estimated the potential water resources in し sixteen mega cities in Asia. The target cities were Delhi and Calcutta, India; Colombo, Sri Lanka; Dhaka, Bangladesh; Yangon, Myanmar; Bangkok, Thailand; Kuala Lumpur, Malaysia; Singapore; Jakarta, Indonesia; Hanoi, Vietnam; Beijing and Hong Kong, the People's Republic of China; Seoul, the People's Republic of Korea; Manila, the Philippines, and Sapporo and Tokyo, Japan. The potential water resources were estimated by subtracting the actual evaporation from the amount of rainfall. The actual evaporation was estimated using the potential evaporation obtained by Hamon's equation which requires the air temperature and the possible hours of sunshine. When the results of Hamon's and Penman's evaporation equations were compared, a considerable error appeared in the low latitude region. The estimation using Hamon's equation was corrected with the linear regression line of Hamon's and Penman's equations. A classification of the land cover was carried out based on satellite photographs of the target cities, and the volume of surface runoff for each city was obtained using the runoff ratios which depended on the land cover. As a result, the potential water resources in the above mega cities in Asia were found to be greater than the world average. However, the actual water resources which are available for one person to use are probably very limited.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.160-167
• /
• 1994

고보자력의 새로운 수평자기기록용 매체를 개발하기위해서 Co-P/Cr과 Co-P-Cr/Cr박막의 자기적 특성을 연구함였다. 상온데서 성막된 Co-P 이원합금의 경우 P의 함량이 9-12 at.%에서 835 Oe의 보자력을 나타내었다. Co-P 이원합금의 경우 P의 함량이 9-12 at.%에서 기판온도가 높을수록 보자력은 오히려 감소하였으며, 이것은 Co-P단일상이 Co와 $Co_{2}P$상으로의 분해에 기인하는 것으로 판단되낟. 그러나 P을 12 at.%이상으로 첨가하면 비정질상의 형성으로 보자력은 급격히 감소하였다. Co-P-Cr 삼원합금박막의 보자력은 Cr 함량이 증가함에 따라 증가하여 상온에서 성장한 $Co_{84}P_{10}Cr_{6}$의 박막에서 1020 Oe의 높은 보자력을 얻을 수 있었다.

• 동아시아식생활학회지
• /
• 제5권2호
• /
• pp.39-48
• /
• 1995

The effects of storage containers and storage temperatures on Kimchi quality were investigated. The results were summarized as follows : 1. Pabix, poly ethylene-back+plastic container, tupper-ware were much better than crock, stainless steel, and plastic container in keeping a Kimchi. However, there was no significant differences between containers in the sensory test for Kimchi. 2. Kimchi stored at 18$\pm$2$^{\circ}C$ was the most delicious, which revealed pH 4.30, acidity 0.45-0.50%, and salt concentration 3.10wt% in the 4th days after storage whereas sensory score for Kimchi quality was very low in the 12th days after storage. 3. pH in Kimchi stored at 5$^{\circ}C$ after fermentation at 18$\pm$2$^{\circ}C$ was slowly decreased as compared to the Kimchi stored at 18$\pm$2$^{\circ}C$, but texture score of Kimchi stored at -5$^{\circ}C$ or -8$0^{\circ}C$ after fermentation at 18$\pm$2$^{\circ}C$, but texture score of Kimchi stored at -5$^{\circ}C$ or -8$0^{\circ}C$ were compared to that of the Kimchi stored at 18$\pm$2$^{\circ}C$ after fermentation. 5. In the group of Kimchi stored at 1$0^{\circ}C$, immediately after picking it took 48days until the best conditions which were pH 4.30 and acidity 0.45-0.50% were matched. 6. The most promising method in keeping good taste and good quality of Kimchi was to store Kimchi at 5$^{\circ}C$ after 4days fermentation at 18$\pm$2$^{\circ}C$. And, for long period preservation of Kimchi, it took would be effective to store at -8$0^{\circ}C$ after fermentation at 18$\pm$2$^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1201-1207
• /
• 2020

This study explored whether MXene (Ti₃C₂T_x) could remove radioactive Cs⁺ from model nuclear wastewater. Various adsorption tests were performed and the physical aspects of the interaction were investigated. We varied the MXene dosage, Cs⁺ initial concentration, solution pH, solution temperature and exposure time. MXene adsorption exhibited very fast kinetics, based on the fact that equilibrium was achieved within 1 h. MXene exhibited an outstanding adsorption capacity (148 mg g^-1) at adsorbent and adsorbate concentrations of 5 and 2 mg L^-1, respectively, at neutral pH condition (i.e., pH 7). We explored Cs⁺ adsorption by MXene in the presence of four different ions (NaCl, KCl, CaCl₂ and MgCl₂) and three different organic acids (sodium oleate, oxalic acid, and citric acid). The Cs⁺ removal rate changed in the presence of these components; adsorption of Cs⁺ by MXene thus involved ion exchange, supported by both Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. We confirmed that MXene was re-usable for at least four cycles. MXene is cost-effective and practical when used to adsorb radionuclides (e.g., Cs⁺) in nuclear wastewater.

• 한국환경과학회지
• /
• 제13권4호
• /
• pp.377-387
• /
• 2004

This study has been performed to clarify the characteristics of temporal and spatial distribution of surface ozone concentration over Jeju Island, one of the cleanest areas in Korea with low emissions of air pollutants. Ozone data are monitored at four sites in Jeju Island. These monitoring sites are located at two urban area(referred to Ido and Donghong), coastal area(Gosan site) and forest site(Chuna site). Ozone data has been routinely collected at these sites for the late four years. The patterns of seasonal cycle of ozone concentrations at all stations show the bimodal with the peaks on spring and autumn and a significant summer minimum. However, the patterns of diurnal variations at rural station, i.e., Gosan and Chuna sites are considerably different to those at urban stations such as Ido and Donghong sites. The patterns of $\DeltaO_3$ variations are very similar with those of monthly mean ozone concentrations and $\DeltaO_3$ values are exceeded 30 ppb, at urban stations. This may be that urban stations are more influenced by local photochemical reactions rather than rural stations. In order to assess the potential roles of meteorological parameters on ozone formation, the meteorological parameters, such as radiation, temperature, and wind are monitored together with ozone concentrations at all stations. The relationships of meteorological parameters to the corresponding ozone concentration are found to be insignificant in Jeju Island. However, at Gosan and Donghong stations, when the sea breeze blew toward the station, the ozone concentration is considerably increased.

• 천문학회보
• /
• 제41권2호
• /
• pp.47.1-47.1
• /
• 2016

We present a preliminary result of search for CO molecular outflows toward a sample of 68 candidate Very Low Luminosity Objects (VeLLOs; Lint ${\leq}0.1L_{\odot}$) to help to understand their physical properties. The sources have been identified using the data at IR to radio wavelengths by M. Kim et al. 2016 toward nearby star-forming regions in the Gould belt. These sources were observed in rotational transitions 2-1 and 3-2 of $^{12}CO$, $^{13}CO$, and $C^{18}O$ molecules with SRAO, CSO, JCMT, and ASTE telescopes. In the beginning of our survey we made a single pointing observation in $^{12}CO$ 2-1 or 3-2 lines for our sample, identifying 53 sources as potential outflow candidates from their line wing features. We made full or partial mapping observations for these candidates with the same lines, finding 33 sources with bipolar or one-sided outflow features. Out of these 33 sources, 6 VeLLOs are previously known sources to have their outflows and 27 VeLLOs are found to be new outflow sources identified from this study. We estimated outflow properties with corrections for excitation temperature, optical depth, and inclination. Their outflow forces range from $8.7{\times}10^{-10}$ to $6.0{\times}10^{-5}M_{\odot}\;km\;s^{-1}yr^{-1}$ with a median value of $3.6{\times}10^{-7}M_{\odot}\;km\;s^{-1}yr^{-1}$, indicating that most of the VeLLOs are less powerful than those for protostars. Their accretion luminosities vary from $9.7{\times}10^{-9}$ to $166L_{\odot}$ with a median value of $0.004L_{\odot}$, implying that most VeLLOs have larger ratios of the accretion luminosity to the internal luminosity but a significant number of VeLLOs have smaller ratios. This result suggests that many of the VeLLOs can be explained with episodic accretion but a significant number of VeLLOs cannot.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.604-609
• /
• 2002

분자 단위의 균일한 조성을 가지는 $BaCeO_3$ 나노 분말을 Pechini법에 기초한 citrate 공정을 통하여 합성하였다. 금속 이온의 chelating제로서 citric acid를, 반응 촉매로서는 ethylen glycol을 각각 사용하여 고분자 전구체를 형성시켰고, 이를 기반으로 $900^{\circ}C$의 온도에서 4시간동안 열처리하여 약 100nm의 균일한 크기와 형상을 가진, 사방정 구조의 단일상 $BaCeO_3$ 분말을 합성하는데 성공하였다. 잔존하는 미량의 $CO_3^{2-}$는 $1100^{\circ}C$ 이상의 온도에서 완전히 분해되었고, 이 때 평균 입도 는 약 2배 증가하였으나 매우 균일한 분포를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1303-1305
• /
• 1998

In order to reduce or avoid oxidation problem at operation the interconnects in SOFCs have so far mostly been made of ceramic material. It has high chemical stability both under cathode and anode condition, relatively thermal expansion coefficient that matchs that of electrolyte material YSZ. But this material shown rather weak in the low oxygen atmosphere and thermal shock, and it has lower mechanical strength than alloys. To avoid these problems one may consider to use metals or alloys as materials for interconnects. Metallic interconnects are advantageous because of their high thermal and electronic conductivities. But it has some problems, Those are high thermal expansion and oxidation at high temperature in air. To solve these problems in the interconnection material in this study, $LaCrO_3$-dispersed Cr alloys for metallic interconnector of SOFC have been investigated as a fuction of $LaCrO_3$ content in the range of 5 to 25 vol.%. The Cr alloy were prepared by mixing Cr and $LaCrO_3$ powders in high-energy ball mill for 48h and by sintering under Ar atmosphere with 5vol.% $H_2$ for 10h at $1500^{\circ}C$. The alloys had a relative density of 95% and above. The Cr alloys in composed of two kind of small $LaCrO_3$ and large Cr particles. As the $LaCrO_3$ content increased, the Cr particle size decreased but the $LaCrO_3$ particle size remained contant. Also the oxidation tests show that the $LaCrO_3$-dispersed Cr is very resistant to oxidation in air. These results means that $LaCrO_3$-dispersed Cr is a useful material for metallic interconnect of planar SOFC.