• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.102-108
• /
• 2007

Heat pump systems are recognized to be heating and cooing systems. In this study, to check the practical application possibility of heat pump systems as low temperature storage systems and get basic data, apples of a long term storage items were stored and performance of low temperature storage and quality changes of apples were evaluated. Cooling coefficient of performance of the system was from 1.1 to 1.3. Although ambient air temperature varied widely from $-13^{\circ}C$ to $29.6^{\circ}C$ during low temperature storage period from January to June, the average temperature of low temperature storage chamber was $1.1^{\circ}C$ at setting temperature of $1.5^{\circ}C$. Sucrose of apples stored by the heat pump decreased from initial sucrose of 15.4% (Brix number) to final sucrose of 14.3%. Weight loss ratio of apples was 9.7% and internal and external view of apples after low temperature storage were very satisfactory with the naked eye.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.344-349
• /
• 2006

The low-temperature processing is very important for fabrication of the very large scale ($60{\sim}70nm$) semiconductor devices since the submicron transistors are sensitive to the thermal budget. Hence, in this work, we propose a noble low-temperature LPCVD (Low-Pressure Chemical Vapor Deposition) process for the $SiO_2$ film and evaluate the electrical reliability of the LTO (Low-Temperature Oxide) by making the capacitors with ONO (Oxide/Nitride/Oxide) structure. The leak current of the LTO was similar to that of the high-temperature wet oxide until the electric field was lower than 5 MV/cm. However, when the electric field was higher, the LTO showed much better characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.558-561
• /
• 2001

Vanadium oxide ($VO_x$) thin films are very good candidate material for uncooled infrared (IR) detectors due to their high temperature coefficient of resistance (TCR) at room temperature. But, the deposition of $VO_x$ thin films showing good electrical properties is very difficult in micro bolometer fabrication process using sacrificial layer removal because of its low process temperature and thickness of thin films less than $1000{\AA}$. This paper presents a new fabrication process of $VO_x$ thin films having high TCR and low resistance. Through sandwich structure of $VO_{x}(100{\AA})/V(80{\AA})/VO_{x}(500{\AA})$ by sputter method and post-annealing at oxygen ambient, we have achieved high TCR more than $-2%/^{\circ}C$ and low resistance less than $10K\Omega$ at room temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.558-561
• /
• 2001

Vanadium oxide ($VO_{x}$) thin films are very good candidate material for uncooked infrared (IR) detectors due to their high temperature coefficient of resistance (TCR) at room temperature. But, the deposition of $VO_{x}$ thin films showing good electrical properties is very difficult in micro bolometer fabrication process using sacrificial layer removal because of its low process temperature and thickness of thin films less than 1000${\AA}$. This paper presents a new fabrication process of $VO_{x}$ thin films having high TCR and low resistance. Through sandwich structure of $VO_{x}$(100${\AA}$)/V(80${\AA}$)/$VO_{x}$(500${\AA}$) by sputter method and post-annealing at oxygen ambient, we have achieved high TCR more than -2%/$^{\circ}C$ and low resistance less than $10K\Omega$ at room temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.400.2-400.2
• /
• 2016

Dye-sensitized solar cells (DSSCs) have been widely investigated as a next generation solar cell because of their simple structure and low manufacturing cost. To realize a commercially competitive technology of DSSCs, it is imperative to employ a technique to prepare nanocrystlline thin film on the flexible organic substrate, aiming at increasing the flexibility and reducing the weight as well as the overall device thickness of DSSCs. The key operation of glass-to-plastic substrates conversion is to prepare mesoporous TiO2 thin film at low temperature with a high surface area for dye adsorption and a high degree of crystallinity for fast transport of electrons. However, the electron transport in the TiO2 film synthesized at low temperature is very poor. So, in this study, TiO2 films synthesized at high temperature were transferred on the selective substrate. We fabricated DSSCs at low temperature using this method. So, we confirmed that the performance of DSSCs using TiO2 films synthesized at high temperature was improved.

• Journal of Ecology and Environment
• /
• v.41 no.8
• /
• pp.213-222
• /
• 2017

Background: This study was conducted to assess the physicochemical water quality and the altitudinal distribution of low-temperature and mountain epilithic diatom (LTMD) community in Buk and Hangae streams that are located in Seorak Mountain with the height of 1708 m in Korea. And the community characteristics of LTMD found in the Buk and Hangae streams were compared to that of LTMD from the Han River system. Results: The physicochemical water qualities of Buk and Hangae streams were determined to be very clean. As a result of analyzing the community composition, 135 taxa of epilithic diatoms were determined, and 22 taxa appeared including Hannaea arcus var. subarcus which are known to have low-temperature and mountain ecological characteristics in the literatures. The relative frequencies of LTMD were 37.0~0.9% range from the upper to lower regions. Although Diatoma tenuis, Eunotia minor, and Gomphonema affine are known to be ubiquitous in streams and lakes, in this research, the three taxa were added into low-temperature and mountain epilithic diatom, since D. tenuis and E. minor appeared only in altitudes above 600 m, and G. affine had the highest relative frequency during spring and fall in altitudes above 700 m, when water temperature was around $10^{\circ}C$. Conclusions: Among the 24 taxa of low-temperature and mountain epilithic diatom (LTMD) (including the 3 taxa added in this study), 14 taxa (Diatoma hyemalis, D. mesodon, D. tenuis, Hannaea arcus, H. arcus var. subarcus, Ulnaria inaequalis, Eunotia bilunaris, E. implicata, E. minor, E. muscicola, E. silvahercynia, E. septena, Delicata delicatula, and Gomphonema affine) represented the characteristics of LTMD very well; they grow best in water temperatures below $15^{\circ}C$ in Buk and Hangae streams and Han River system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.587-588
• /
• 2010

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.27-28
• /
• 2012

This study is to low-temperature in using self-adhesive waterproofing sheet. Using self-adhesive waterproofing sheet is very comfortable in a waterproofing construction site. However, when self-adhesive waterproofing sheet is constructed from a low-temperature environment, there has been a attachment strength shortage. Therefore, this study on the attachment strength of self-adhesive waterproofing sheet is to investigate the low-temperature in the environment.

• Food Science and Preservation
• /
• v.3 no.2
• /
• pp.155-170
• /
• 1996

In order to determine the physiolosical characteristics of plum fruits(Oishi wase) during maturation and guilty according to temperature after harvest, (2-chloroethyl) phosphonic acid(ethphon) 390ppm was sprayed on plum tree 11days before commercial matuarity in Suwon area. And also this study was acted to investigate fruits quility(Formosa) influenced by temperature(room, low) and polyethylene films(0.03, 0.06, 0.1mm), 1. Effect of ethphon on the fruits maturation and fruits(Oishi wase) quility according to temperature ofter harvest. Ethephon stimulated fruits ripening but the firmness was reduced rapidly. Soluble solids and titratable acidity was not very different than each treatment. Carbon dioxide and ethylene production were advanced and the production peak were shown earlier by ethephon treatment as compared with control fruit. Anthocyanin development was enhansed rapidly by ethephon treatment but it exerted a bad influence on fruits color after harvest, The soluble sugars in fluits were mainly glucose, sucrose, and fructose. Those content were higher in treated fruit than control. The organic acid was mainly malic acid. The shelf life was less than about 5days at room temperature and about 10 days at low temperature. 2. Fruits(Formosa) quility as affected by polyethylene film bagging. The polyethylene films well maintained the firmness both room and low temperature. Low temperature was more effective in maintaining titratable acidity than room temperature, especially polyethylene films. On the Other hand, soluble solids content was not shown wide differance between room and low temperature. Polyethylene film showed a high resperation rate, the rate was higher at room temperature than low temperature and thicker films revealed higher rate. Otherwise, ethylene production was low in all treatment Polyethylene film inhibited the coloration of fruits, decreased anthocyanin content. Fruits coloration delayed by low temperature in control. The shelf life of plum fruits was about 6 days at room temperature and 13 days at low temperature in control Polyethylene film had no advantage on shelf life both at room and low temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1157-1165
• /
• 2009

In AC-PDP, it is necessary to achieve high luminance efficiency, high luminance and high definition by adopting technologies such as high xenon concentration, MgO doping, and long gap. However, it is very difficult to apply above technologies because they make the driving voltage margin reduced. Especially, high Xe concentration technology for high efficacy makes not only the driving voltage margin reduced but also the stability of reset discharge decreased at low temperature. In this paper, we studied temperature and voltage dependent stability of reset discharge and present the experimental results of the discharge characteristics at low temperature. In addition, we suggested the mechanism of bright noise and black noise at low temperature. Finally, we proposed double reset waveform to improve the bright noise and descending scan time method to improve the black noise.