• 제목/요약/키워드: Vertical speed

검색결과 1,196건 처리시간 0.033초

동심원 등가풍속을 이용한 대기안정도에 따른 풍력자원 변화에 관한 연구 (Accounting for the Atmospheric Stability in Wind Resource Variations and Its Impacts on the Power Generation by Concentric Equivalent Wind Speed)

  • 류건화;김동혁;이화운;박순영;유정우;김현구
    • 한국태양에너지학회 논문집
    • /
    • 제36권1호
    • /
    • pp.49-61
    • /
    • 2016
  • The power production using hub height wind speed tends to be overestimated than actual power production. It is because the hub height wind speed cannot represent vertical wind shear and blade tip loss that aerodynamics characteristic on the wind turbine. The commercial CFD model WindSim is used to compare and analyze each power production. A classification of atmospheric stability is accomplished by Monin-Obukhov length. The concentric wind speed constantly represents low value than horizontal equivalent wind speed or hub height wind speed, and also relevant to power production. The difference between hub height wind speed and concentric equivalent wind speed is higher in nighttime than daytime. Under the strongly convective state, power production is lower than under the stable state, especially using the concentric equivalent wind speed. Using the concentric equivalent wind speed considering vertical wind shear and blade tip loss is well estimated to decide suitable area for constructing wind farm.

고속열차 350km/h 주행시 열차풍이 방음벽 등 궤도에 수직평행한 선로변 구축물에 미치는 영향에 관한 연구 (A Study on the Effects of the Train Gust induced by High speed train at 350km/h on the Simple Vertical Surfaces Parallel to the Track)

  • 김재복;남성원;고태환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.529-544
    • /
    • 2007
  • After rapid running is begun in domestic, problem by the train gust that was not considered at existent train running appeared. If the High-Speed railway business speed rises by 350km/h in the future, is going to become more big problem. This study conducts an experiment that measure in local about KTX train beside Gyeong-Bu High speed railroad track about aerodynamics effect that happen by passage of train and analyzed. In case KTX II runs with the 350km/h speed, forecasted effect that get in the simple vertical surfaces parallel to tracks according to distance from rail center. Compared construction size with structural analysis in case do not consider with case that consider the train gust about sound proof walls representatively. As a result, proposed wind load standard that apply at sound proof walls design.

  • PDF

The Comparison of 'Knowledge of Result' and 'Knowledge of Performance' in the Children with Cerebral Palsy

  • Lee, Hye-Young;Lee, In-Hee
    • The Journal of Korean Physical Therapy
    • /
    • 제27권2호
    • /
    • pp.81-84
    • /
    • 2015
  • Purpose: The purpose of this study was to compare the effect of 'knowledge of result' and 'knowledge of performance', two types of extrinsic feedbacks, during the sit-to-stand movement in children with hemiplegic cerebral palsy. Methods: A total of ten children with hemiplegic cerebral palsy (ages 8 to 12 years) were recruited for the study. Subjects with hemiplegic cerebral palsy performed sit-to-stand movement in front of a mirror. Their performance was supervised and revised for normal movement by a pediatric physiotherapist. In the knowledge of the result, subjects performed sit-to-stand using a chair with an armrest in their mind with normal movement. In the knowledge of performance, subjects performed sit-to-stand under verbal instructions. Randomized cross over trials were used in this study. Main outcome measurements were as follows: mediolateral speed, anteroposterior speed, velocity moment, extent in mediolateral direction, extent in anteroposterior direction, and vertical distance of the center of pressure. Results: The mediolateral speed and extent of center of pressure was higher for 'knowledge of performance' in comparison with the other type of extrinsic feedbacks (p<0.05). The other parameters, including anteroposterior speed and extent, and vertical speed of the center of pressure, did not differ between the two types of extrinsic feedbacks (p>0.05). Conclusion: These findings suggested that training in sit-to-stand movement with 'knowledge of result' may result in better use of extrinsic feedback.

정면 규칙파 중 활주형 고속선의 운동 응답에 대한 실험적 연구 (An Experimental Study on the Motion Response of a High-Speed Planing Craft in Regular Head Waves)

  • 김동진;이기표;황승현;박한솔
    • 대한조선학회논문집
    • /
    • 제46권4호
    • /
    • pp.373-381
    • /
    • 2009
  • The running attitude of a high-speed planing craft may change significantly depending on its speed in seaway. Other variables that may influence its running attitude are its weight, center of gravity, sea conditions, and so on. In this paper, planing craft model tests were carried out with respect to above variables in SNU towing tank, and vertical motion responses of a planing craft in regular head waves were analyzed. The experimental results in regular waves were compared with those in calm water, and compared with the theoretical estimations. Finally, the effects of running speeds of a planing craft on its motion amplitudes are confirmed.

Multiple tuned mass dampers for controlling coupled buffeting and flutter of long-span bridges

  • Lin, Yuh-Yi;Cheng, Chii-Ming;Lee, Chung-Hau
    • Wind and Structures
    • /
    • 제2권4호
    • /
    • pp.267-284
    • /
    • 1999
  • Multiple tuned mass dampers are proposed to suppress the vertical and torsional buffeting and to increase the aerodynamic stability of long-span bridges. Each damper has vertical and torsional frequencies, which are tuned to the corresponding frequencies of the structural modes to suppress the resonant effects. These proposed dampers maintain the advantage of traditional multiple mass dampers, but have the added capability of simultaneously controlling vertical and torsional buffeting responses. The aerodynamic coupling is incorporated into the formulations, allowing this model to effectively increase the critical speed of a bridge for either single-degree-of-freedom flutter or coupled flutter. The reduction of dynamic response and the increase of the critical speed through the attachment of the proposed dampers to the bridge are also discussed. Through a parametric analysis, the characteristics of the multiple tuned mass dampers are studied and the design parameters - including mass, damping, frequency bandwidth, and total number of dampers - are proposed. The results indicate that the proposed dampers effectively suppress the vertical and the torsional buffeting and increase the structural stability. Moreover, these tuned mass dampers, designed within the recommended parameters, are not only more effective but also more robust than a single TMD against wind-induced vibration.

수직축 풍력터빈 성능개선에 관한 실험적 연구 (An Experimental Study on the Performance of the Vertical-Axis Wind Turbine)

  • 김병국;김영호;송우석;이승배;남상규;김사만
    • 한국유체기계학회 논문집
    • /
    • 제10권3호
    • /
    • pp.17-24
    • /
    • 2007
  • This paper presents the design procedure of a vertical wind turbine named jet-wheel-turbo turbine and the numerical and experimental verifications. The design parameters such as the rotor inlet angle, the diameter-to-hub ratio, the inlet guide outlet angle and the solidity were optimized to maximize the energy transfer, and to further increase the turbine efficiency by applying the side guide vane and the side opening to the rotor. The maximum power coefficient of 0.59, which is much higher than the ever-designed three-bladed horizontal turbines, was experimentally obtained when the optimal inlet- and side-guide vanes were installed and both sides of the rotor were 80% opened. The maximum power coefficients occur at the tip speed ratio ranging between 0.6 and 0.7. This vertical-axis turbine model can be applied to the large-scale power generation system with the speed and torque control algorithm for the specified wind characteristics.

도시형 소형 수직축 풍력 발전기의 형태별 성능에 대한 실험적 고찰 (Experimental study on the performance of urban small vertical wind turbine with different types)

  • 강덕훈;신원식;이장호
    • 한국유체기계학회 논문집
    • /
    • 제17권6호
    • /
    • pp.64-68
    • /
    • 2014
  • This paper is intended to provide experimental data for the design of the small VAWT(vertical axis wind turbine). Three types(lift, drag, and hybrid) of the blade of VAWT are tested with digital wind tunnel in this study. From the test, the relation of power coefficient and tip speed ratio for the blades are evaluated and compared each other depending on the blade type. Especially, the characteristics of hybrid blade which is shown to be expanded in the market without any logical data is proposed in the relation of power coefficient and tip speed ratio. It is shown that the hybrid blade can be used to make higher starting torque with trade off of degradation of power coefficient.

수직 하중에 따른 목재 짜맞춤 접합부의 강성도 평가 (Evaluation of Stiffness Ratio of Wooden Mortise and Tenon Joint on Vertical Loading)

  • 박천영;이전제;김광철
    • 한국가구학회지
    • /
    • 제23권3호
    • /
    • pp.290-297
    • /
    • 2012
  • Recently, interest in wooden construction have been growing by increasing needs and demands for eco-friendly and traditional wooden building(Hanok). Especially, Hanok has the technical development in manufacturing the mortise-tenon joint without fasteners(precut), so it could be called to modernization, industrialization and popularization. But the structural design and analysis of the structure were not regulated and had the difficulty to consider the variation of wooden member and to conduct the difficulty in the structural analysis and the design of the joint. In this study, the stiffness ratio of wooden mortise and tenon joint was evaluated according to the vertical loading, lintel and loading speed. The joint was distinguished in semi-rigid joint regardless of their factors. The stiffness ratio was 0.40 in vertical loading, 0.50 without vertical loading and 0.44 in horizontal loading with high speed. This study would be utilized to the structural analysis and design with structural analysis and design program.

  • PDF

소형 수직축 풍력발전기 풍동실험시 폐쇄율의 영향 (Effect of Blockage Ratio on Wind Tunnel Testing of Small Vertical-Axis Wind Turbines)

  • 정회갑;이승호;권순덕
    • 한국태양에너지학회 논문집
    • /
    • 제34권3호
    • /
    • pp.98-106
    • /
    • 2014
  • The effect of blockage ratio on wind tunnel testing of small vertical-axis wind turbine has been investigated in this study. Height and rotor diameter of the three blades Darrieus vertical axis wind turbine used in present test were 0.4m and 0.35m respectively. We measured the wind speeds and power coefficient at three different wind tunnels where blockage ratio were 3.5%, 13.4% and 24.7% respectively. The test results show that the measured powers have been strongly influenced by blockage ratio, generally increased as the blockage ratio increases. The maximum power at higher blockage ratio has been obtained at relatively high tip speed ratio compared with that at low blockage ratio. The measured power coefficients under high blockage ratio can be improved from proper correction using the simple correction equation based on blockage factor. In present study, the correction error for power coefficient can be less than 5%, however correction effectiveness reveals relatively poor at high blockage ratio and low wind speed.

전기차 응용을 위한 수직형 GaN 전력반도체 기술 동향 (Technical Trends in Vertical GaN Power Devices for Electric Vehicle Application)

  • 이형석;배성범
    • 전자통신동향분석
    • /
    • 제38권1호
    • /
    • pp.36-45
    • /
    • 2023
  • The increasing demand for ultra-high efficiency of compact power conversion systems for electric vehicle applications has brought GaN power semiconductors to the fore due to their low conduction losses and fast switching speed. In particular, the development of materials and core device processes contributed to remarkable results regarding the publication of vertical GaN power devices with high breakdown voltage. This paper reviews recent advances on GaN material technology and vertical GaN power device technology. The GaN material technology covers the latest technological trends and GaN epitaxial growth technology, while the vertical GaN power device technology examines diodes, Trench FETs, JFETs, and FinFETs and reviews the vertical GaN PiN diode technology developed by ETRI.