• 제목/요약/키워드: Vertical particle size distribution measurement

검색결과 6건 처리시간 0.022초

드론을 이용한 안면도 상공 대기경계층내의 미세먼지 연직분포 및 Flux 측정 (Vertical Aerosol Distribution and Flux Measurement in the Planetary Boundary Layer Using Drone)

  • 김희상;박용희;김우영;은희람;안강호
    • 한국입자에어로졸학회지
    • /
    • 제14권2호
    • /
    • pp.35-40
    • /
    • 2018
  • Vertical particle size distribution, total particle concentration, wind velocity, temperature and humidity measurement was performed with a drone. The drone was equipped with a wind sensor, house-made optical particle count(Hy-OPC), condensation particle counter(Hy-CPC), GPS, Temperature, Relative Humidity, Pressure and communication system. Base on the wind velocity and the particle size vertical distribution measurement with drone, the particle mass flux was calculated. The vertical particle distribution showed that the particle number concentration was very strongly correlated with the relative humidity.

Tethered-Balloon Package System 개발 및 대기 에어로졸의 연직 분포 측정 (Development of Tethered-Balloon Package System for Vertical Distribution Measurement of Atmospheric Aerosols)

  • 은희람;이홍규;이양우;안강호
    • 한국입자에어로졸학회지
    • /
    • 제9권4호
    • /
    • pp.253-260
    • /
    • 2013
  • For a vertical atmospheric aerosol distribution measurement, a very compact and light particle sampling package is developed. This package includes a compact optical particle counter (Hy-OPC), a light and small condensation particle counter (Hy-CPC), sensors (GPS, wind velocity, temperature, humidity), and a communication and system control board. This package is attached to He balloon and the altitude is controlled by a winch. Using this system the vertical particle size distribution was measured. The test results showed that the ground base atmospheric particle measurement result may be a lot different from that high above the ground.

Vertical Change in Extinction and Atmospheric Particle Size in the Boundary Layers over Beijing: Balloon-borne Measurement

  • Chen, Bin;Shi, Guang-Yu;Yamada, Maromu;Zhang, Dai-Zhou;Hayashi, Masahiko;Iwasaka, Yasunobu
    • Asian Journal of Atmospheric Environment
    • /
    • 제4권3호
    • /
    • pp.141-149
    • /
    • 2010
  • Aerosol size and number concentration were observed in the atmospheric boundary layer over Beijing (from near the ground to 1,200 m) on March 15 (a clear day) and 16 (a dusty day), 2005. The results were further compared with lidar measurements in order to understand the dependency of extinction on the particle size distribution and their vertical changes. The boundary layer atmosphere was composed of several sub-layers, and a dry air layer appeared between 400 and 1,000 m under the influence of dust event. In this dry air layer, the concentration of the fine-mode particles (diameter smaller than $1.0\;{\mu}m$) was slightly lower than the value on the clear day, while the concentration of coarse-mode particles (diameter larger than $1.0\;{\mu}m$) was remarkably higher than that on the clear day. This situation was attributed to the inflow of an air mass containing large amounts of Asian dust particles and a smaller amount of fine-mode particles. The results strongly suggest that the fine-mode particles affect light extinction even in the dusty atmosphere. However, quantitatively the relation between extinction and particle concentration is not satisfied under the dusty atmospheric conditions since laser beam attenuates in the atmosphere with high concentration of particles. Laser beam attenuation effect becomes larger in the relation between extinction and coarse particle content comparing the relation between extinction and fine particle content. To clarify this problem technically, future in situ measurements such as balloon-borne lidar are suggested. Here extinction was measured at 532 nm wavelength. Measurements of extinction at other wavelengths are desired in the future.

Wafer Surface Scanner를 이용한 반도체 웨이퍼상의 입자 침착속도의 측정 (Measurement of Particle Deposition Velocity toward a Horizontal Semiconductor Wafer Using a Wafer Surface Scanner)

  • 배귀남;박승오;이춘식;명현국;신흥태
    • 설비공학논문집
    • /
    • 제5권2호
    • /
    • pp.130-140
    • /
    • 1993
  • Average particle deposition velocity toward a horizontal semiconductor wafer in vertical airflow is measured by a wafer surface scanner(PMS SAS-3600). Use of wafer surface scanner requires very short exposure time normally ranging from 10 to 30 minutes, and hence makes repetition of experiment much easier. Polystyrene latex (PSL) spheres of diameter between 0.2 and $1.0{\mu}m$ are used. The present range of particle sizes is very important in controlling particle deposition on a wafer surface in industrial applications. For the present experiment, convection, diffusion, and sedimentation comprise important agents for deposition mechanisms. To investigate confidence interval of experimental data, mean and standard deviation of average deposition velocities are obtained from more than ten data set for each PSL sphere size. It is found that the distribution of mean of average deposition velocities from the measurement agrees well with the predictions of Liu and Ahn(1987) and Emi et al.(1989).

  • PDF

Hydrogeological Characteristics of a Riverine Wetland in the Nakdong River Delta, Korea

  • Jeon, Hang-Tak;Cha, Eun-Ji;Lim, Woo-Ri;Yoon, Sul-Min;Hamm, Se-Yeong
    • 한국지구과학회지
    • /
    • 제42권4호
    • /
    • pp.425-444
    • /
    • 2021
  • Investigating the physical and chemical properties of riverine wetlands is necessary to understand their distribution characteristics and depositional environment. This study investigated the physical (particle size, color, and type) and chemical properties (organic, inorganic, and moisture contents) of sediments in Samrak wetland, located in the Nakdong River estuary area in Busan, South Korea. The particle size analysis indicated that the hydraulic conductivity values for the coarse grain and the mixture of coarse and fine grains ranged from 2.03 to 3.49×10-1 cm s-1 and 7.18×10-3 to 1.24×10-7 cm s-1, respectively. In-situ water quality and laboratory-based chemical analyses and radon-222 measurement were performed on groundwater and surface water in the wetland and water from the nearby Nakdong River. The physical and chemical properties of Samrak wetland was characterized by the sediments in the vertical and lateral direction. The concentrations of chemical components in the wetland groundwater were distinctly higher than those in the Nakdong River water though the wetland groundwater and Nakdong River water equally belonged to the Ca-HCO3 type.

ELCOM-CAEDYM을 이용한 대청댐 유입탁수의 3차원 모델링 (3D Modeling of Turbid Density Flow Induced into Daecheong Reservoir with ELCOM-CAEDYM)

  • 정세웅;이흥수;류재일;류인구;오동근
    • 한국수자원학회논문집
    • /
    • 제41권12호
    • /
    • pp.1187-1198
    • /
    • 2008
  • 국내 많은 저수지들과 그 하류하천은 높은 탁도를 가진 물의 장기적인 방류로 인해 수자원 이용과 수생태계 관리에 많은 어려움을 겪고 있다. 탁도($C_T$)는 물의 탁한 정도를 나타내는 척도로써, 수질과 수환경의 건강을 평가하는 매우 중요한 지표로써 광범위하게 사용되어 왔지만, 모형의 검증에 필요한 실험 자료의 부족으로 인해 탁도 모델링에 대한 연구는 지금까지 매우 부족하였다. 본 연구의 목적은 광범위한 현장 실측자료를 이용하여 성층화된 대청호로 유입한 탁수의 밀도류 거동 모의를 위한 3차원 수리-입자동력학 연동 수치모형인 ELCOM-CAEDYM의 적용성을 검증하는데 있다. 입자크기에 따라 구분된 3개 그룹의 부유물질 (SS) 농도가 모형의 모의변수로 사용되었으며, 모형 변수인 SS와 저수지내 실측값의 $C_T$의 변환을 위해 저수지 지점별로 측정한 SS-$C_T$ 상관관계를 사용하였다. 모의결과는 2004년에 대청호의 회남과 댐앞 지점에서 수심별로 실측한 수온과 탁도 자료와 비교함으로써 검증하였다. 모형은 저수지의 성층구조, 탁수를 포함한 하천 밀도류의 시간에 따른 진행과정을 잘 재현하였으며, 탁도의 수직분포와 크기도 실측값과 부합하였다. 본 연구에서 제시한 3차원 수치모형과 탁도 모델링 방법론은 유사한 탁도 문제를 가지고 있는 다른 저수지에서도 탁수의 최적관리를 위한 지원 도구로써 사용 가능하다고 사료된다.