• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권3호
• /
• pp.1-13
• /
• 2021

Groundwater monitoring is commonly practiced with real-time sensors placed in several depth spots in aquifer. However, this method only provides monitoring data at the point where the sensors are installed. In this study, we developed a vertical line monitoring system (VLMS) that can provide continuous data of groundwater parameters along the vertical depth. The device was installed in a well located on the coast of the eastern part of Jeju island to monitor electrical conductivity, temperature, salinity, pH, dissolved oxygen, and oxidation-reduction potential over approximately 3 months from September 11 to December 3, 2020. The results indicated that the groundwater levels fluctuated with the tidal change of seawater level, and the upper and lower boundaries of the freshwater and saltwater zone in the groundwater were located at below 16 m and 36 m of mean sea level, respectively. There was a large variation in EC values during the high tide and temperature change was the greatest during flow tide. Although further investigation is needed for improvement of the device to obtain more accurate and reliable data, the device has a potential utility to provide fundamental data to understand the seawater intrusion and transport mechanisms in coastal aquifers.

• ETRI Journal
• /
• 제34권1호
• /
• pp.87-97
• /
• 2012

This study presents an automatic matching method for generating a dense, accurate, and discontinuity-preserved digital surface model (DSM) using multiple images acquired by an aerial digital frame camera. The proposed method consists of two main procedures: area-based multi-image matching (AMIM) and stereo-pair epipolar line matching (SELM). AMIM evaluates the sum of the normalized cross correlation of corresponding image points from multiple images to determine the optimal height of an object point. A novel method is introduced for determining the search height range and incremental height, which are necessary for the vertical line locus used in the AMIM. This procedure also includes the means to select the best reference and target images for each strip so that multi-image matching can resolve the common problem over occlusion areas. The SELM extracts densely positioned distinct points along epipolar lines from the multiple images and generates a discontinuity-preserved DSM using geometric and radiometric constraints. The matched points derived by the AMIM are used as anchor points between overlapped images to find conjugate distinct points using epipolar geometry. The performance of the proposed method was evaluated for several different test areas, including urban areas.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1052-1057
• /
• 2004

Various amplitudes and frequencies of axle loads are applied to the domestic conventional line. Vertical stresses and settlements on the subgrade may be changed depending on the variation of axle loads. This paper introduces the research results to estimate vertical stresses and settlements on the subgrade with numerical analysis(Distinct Element Method), full scale test, and field test.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.121-131
• /
• 2008

슬러리월 연직차수벽 시공시, 지반을 트렌치 형태로 굴착하고, 굴착시공 중 굴착면 붕괴에 대한 안정성을 유지하기 위하여 벤토나이트와 물을 혼합한 슬러리를 트렌치에 채운다. 이렇게 채워진 벤토나이트 슬러리로 인하여 필터케이크(filter cake)이라 불리는 얇고 투수성이 낮은 층이 트렌치벽 표면에 형성되며, 슬러리가 제거 된 이후에도 굴착면에 잔존하여 연직차수벽에서의 순간변위시험(slug test) 해석 결과에 중요한 영향을 미친다. 본 연구에서는 기존에 개발된 수치해석 프로그램 Slug-3D를 수정하여 순간변위시험 해석시 필터케이크의 영향을 고려하는 방법을 제시하고 이를 통하여 정확한 연직차수벽의 투수계수를 산출하도록 하였다. 필터케이크의 영향을 고려하기 위하여 Slug-3D에서는 차수벽과 토양층의 경계면에 불투수조건(no-flux)을 경계조건으로 설정하여 해석을 수행하였다 또한 투수계수 산정에서 기존의 타입커브법(type curve method)을 이용하기 위하여 개선된 type curve를 도출하였고, 선형 커브피팅법(line-fitting method)를 필터케이크가 존재하는 연직차수벽에 적용할 수 있도록 수정 보완하였다. 본 논문에서 제안된 필터케이크를 고려한 해석방법은 EMCON(1995)에 의해 수행된 현장시험 결과의 재해석을 통하여 타당성을 검토하였다. 또한, 본 연구에서 얻어진 결과를 Choi and Daniel(2006)에 의해 수행된 필터케이크가 존재하지 않는 경우의 순간변위시험 해석결과와 비교를 통해 필터케이크 고려가 반드시 필요함을 보여준다.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1998

빔 성형 안테나를 개발하기 위해서 변형된 전송선로형 안테나(MTLA)의 둘레 및 수평, 수직 소자 길이를 가변한다. 빔 틸트 특성의 검증을 위해 각각의 변형된 형상을 갖는 MTLA에 대한 수직면 방사패턴을 모먼트법으로 해석한다. 해석 결과로부터 구현될 수 있는 최대 빔 틸트는 주로 수직 소자길이에따라 결정된다는 사실올 확 인하였다. 최대 빔 틸트를 갖는 안테나를 셜게하고 입력 임피던스 및 방사 특성을 이론적으로 계산하고 실험에 의하여 확인하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.185-185
• /
• 2011

Mapping of artificial levee lines, one of major tasks in river zone mapping, is critical to prevention of river flood, protection of environments and eco systems in river zones. Thus, mapping of artificial levee lines is essential for management and development of river zones. Coastal mapping including river zone mapping has been historically carried out using surveying technologies. Photogrammetry, one of the surveying technologies, is recently used technology for national river zone mapping in Korea. Airborne laser scanning has been used in most advanced countries for coastal mapping due to its ability to penetrate shallow water and its high vertical accuracy. Due to these advantages, use of LiDAR data in coastal mapping is efficient for monitoring and predicting significant topographic change in river zones. This paper introduces a method for construction of a 3D artificial levee line using a set of LiDAR points that uses normal vectors. Multiple steps are involved in this method. First, a 2.5-dimensional Delaunay triangle mesh is generated based on three nearest-neighbor points in the LiDAR data. Second, a median filtering is applied to minimize noise. Third, edge selection algorithms are applied to extract break edges from a Delaunay triangle mesh using two normal vectors. In this research, two methods for edge selection algorithms using hypothesis testing are used to extract break edges. Fourth, intersection edges which are extracted using both methods at the same range are selected as the intersection edge group. Fifth, among intersection edge group, some linear feature edges which are not suitable to compose a levee line are removed as much as possible considering vertical distance, slope and connectivity of an edge. Sixth, with all line segments which are suitable to constitute a levee line, one river levee line segment is connected to another river levee line segment with the end points of both river levee line segments located nearest horizontally and vertically to each other. After linkage of all the river levee line segments, the initial river levee line is generated. Since the initial river levee line consists of the LiDAR points, the pattern of the initial river levee line is being zigzag along the river levee. Thus, for the last step, a algorithm for smoothing the initial river levee line is applied to fit the initial river levee line into the reference line, and the final 3D river levee line is constructed. After the algorithm is completed, the proposed algorithm is applied to construct the 3D river levee line in Zng-San levee nearby Ham-Ahn Bo in Nak-Dong river. Statistical results show that the constructed river levee line generated using a proposed method has high accuracy in comparison to the ground truth. This paper shows that use of LiDAR data for construction of the 3D river levee line for river zone mapping is useful and efficient; and, as a result, it can be replaced with ground surveying method for construction of the 3D river levee line.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1478-1486
• /
• 2009

As a conventional line-fitting method, the Bouwer and Rice method has been popularly adopted to estimate the hydraulic conductivity of an aquifer through a slug test. Because a ventical cutoff wall is usually very compressible and features a small wall thickness, the Bouwer and Rice method should be carefully used for the vertical cutoff wall. In addition, a relatively impermeable layer, called a filter cake, formed at the interface between the cutoff wall and the natural soil formation makes it difficult to use the Bouwer and Rice method directly. In order to overcome such limitations, the original Bouwer and Rice method is modified by incorporating the concept of the flow net method. In this modification, the geometry condition of cutoff walls including the filter cake is effectively considered in evaluating the hydraulic conductivity of a vertical cutoff wall.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1013-1019
• /
• 1987

This paper proposes the four directional line segmentation method to transform the size of dot patterns such as character dot patterns, line drawings and so on, while maintaining the quality of original pattern. At the first, this method extracts three kinds of line segmentm, namely horizontal, vertical line and slant line, and then transforms dot patterns using the each rules which are appricable to each kind of extracted line segments. Our experimental results show that transformation of dot patterns can be succeed in good quality without implementing some kinds of smoothing processes, covering the continuous transforming ratio of 0.5 to N times.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.409-412
• /
• 2001

This paper decides provision of brightness by average value of horizontal pixel, vertical pixel association. Give weight at association value calculation to improve diagonal line characteristics, and applied method to add average of vertical pixel and average of diagonal line pixel at interpolation. Therefore it improves PSNR, and it proposed algorithm that improve horizontal outline and vortical outline characteristics in big area of luminance contrast. It changed scanning line of serial scan based on proposed algorithm and designed variable image system for efficient data transmission through PCI interface circuit.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.552-557
• /
• 2001

Copper slag is the by-producted material on the proceeding of refining the copper. To verify applications of copper slag to vertical drain material can substitute for the sands in ground improvement, laboratory soil tests and consolidation model tests were conducted. The results of consolidation model test was analyzed as the hyperbolic method. The hyperbolic method assumes that the settlement(s) versus time(t) behavior approaches a straight line describes a hyperbolic reaction. The inverse of the slope of the line would then yield the ultimate settlement. Through in this study, copper slag is compatible with vertical drain material as like sands. Copper slag compaction pile promote the consolidation settlement.