• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.337-342
• /
• 2000

Purpose : The purpose of this study was to analyze the lower third facial changes in frontal view after mandibular setback surgery. Materials and Methods : In this study, fifteen subjects(6 males and 9 females) with class III dental and skeletal malocclusions who were treated with BSSRO(Bilateral Sagittal Split Ramus Ostetomy) were used. Frontal cephalometric radiographs were taken preoperatively and more than 6 months postoperatively, and hard tissue(H2-Hl) and soft tissue changes (S2-S1) were measured on vertical and horizontal reference lines. In 15 cases, changes which developed more than 6 months after surgery were studied. Results : The results were as follows. 1. In the facial height, hard tissue $decreased(2.46{\pm}2.76mm)$ with statistical significance(P<0.01), and soft tissue also $decreased(1.64{\pm}3.66mm)$. As a result, the facial height generally becomes shorter after sagittal split ramus osteotomy. 2. In the mandibular width, hard tissue $decreased(2.08{\pm}3.59mm)$ with statistical sgnificance(P<0.05), but soft tissue $increased (2.14{\pm}5.73mm)$ without statistically significant difference(P>0.05) postoperatively. 3. In the facial index, hard tissue $decreased(0.23{\pm}2.21%)$, but soft tissue $increased(2.41{\pm}3.46%)$ with statistical significance. Conclusion : One of the main purpose of orthognathic surgery is to achieve facial esthetics and harmony. In order to fullfill this purpose, it is important to carry out a precise presurgical treatment planning by estimating the changes of frontal profile after surgery.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.129-142
• /
• 1995

The purpose of this study was to estimate correlations of craniocervical posture and craniofacial morphology in Korean young adults. The sample consisted of 50 young adults (25 males and 25 females) who had good profile and Class I molar relationship. The analysis of craniocervical posture and craniofacial morphology was performed on lateral cephalograms taken in natural head position. The results were as follows, 1. The mean and the standard deviation of postural and morphologic variables were obtained. 2. Korean young adult had cervical lordosis of which degree between OPT and CVT shows $3.55{\pm}2.58^{\circ}$ 3. Craniocervical posture and each of vertical ratio, facial prognathism, mandibular rotation showed high correlation. 4. Correlation coefficients between postural variables and each of intermaxillary relation, anteroposterior ratio were low. 5. The head positioning error of natural head position was smaller than the inter-individual variability of postural variables.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.594-606
• /
• 1996

This study was intended to perform the relationships between mandibualr lateral deviation in facial asymmetry patients and morphology of the cranial vault. In 30 patients(males 14, female 16) using submento-vertical cephalograms that were taken in the pre-operaticve state and posteroanterioir cephalograms that were taken in centric occlusion before, immediate and long term after surgery. 1. Mean mandibular deviation was about $-3.12^{\circ}$and mean of absolute measurement was about $2.50^{\circ}$on the submento-vertical cephalograms. 2. On the submento-vertical cephalograms, there was no significant difference between non-deviation and deviation side but it had tendency that deviation side was larger than non-deviation side on the frontal portion of cranium(Y10 to Y6) and deviation side was smaller than non-deviation on the temporal portion of cranium(Y5, Y-1 to Y-5). 3. Mean mandibular deviation was about $1.40^{\circ}$and mean of absolute measurement was about $3.95^{\circ}$on the posteroanterioir cephalograms. 4. There was statistical significance on the influence of surgical change(PT2A-PT1A) to the relapse(PTLA-PT2A)(p<0.05). The more increasing of the change, the more relapse on the posteroanterioir cephalograms. 5. There was no statistical significance on the influence of degree of mandibular deviation to morphology of the cranium on the submento-vertical cephalograms. But it had tendency that the more mandibular deviation, the larger the non-deviation side on the anterior cranium and deviation side on the posterior cranium(p>0.05). 6. There was statistical significance on the influence of the degree of mandibular deviation on the posteroanterioir cephalograms to the difference between non-deviation and deviation side. The more increasing of mandibular deviation, the larger the non-deviation side on the Y4 to Y-6(p<0.05). 7. There was no statistical significance on the influence of difference between non-deviation and deviation side to the relapse on the posteroanterioir cephalograms. But it had tendency that the more increasing of the differece between non-deviation and deviation side, the more increasing the relapse on temporal of cranium.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.763-774
• /
• 1998

The purpose of this study was to evaluate the morphology of mandibular symphysis and location of lower incisor under the influence of the craniofacial skeleton in skeletal Class III malocclusion. The sample consisted of 132 adults who have severe Class III malocclusion(prognathism group, 33 males and 33 females), and who have normal occlusion(normal group, 33 males and 33 females). They had not received any orthodontic treatment or orthognathic surgery. The lateral cephalograms were evaluated. The results were as follows : 1. Prognathism group were larger than normal group in comparison of facial skeleton (p<0.05) with the exception of ${\angle}FH-Pal$, ${\angle}SNA$. 2. In the morphology of symphysis, measurements of anteroposterior width(LaABBW, LiABBW, SW) of prognathism group were significantly less than that of normal group(p<0.001). 3. In the correlative analysis between the craniofacial skeleton and symphysis measurements of prognathism group, vertical measurements in relation with cranial base and mandibular plane showed reverse correlationship with anteroposterior width of symphysis(LiACBW, LaACBW, LiABBW, SW)(p<0.05). But, there was not distinct difference between horizontal skeletal measurements and symphysis measurements(p>0.05). 4. The probability by regression test between vertical measurements(${\angle}SN-Mn,\;{\angle}FMA,\;{\angle}Pal-Mn,\;{\angle}LFH$) and symphysis measurements(LiACBW, LiABBW, SW, ${\angle}LISA$) were very high(p<0.001).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.540-546
• /
• 1994

The authors treated three patients who chiefly complained functional anterior crossbite due to premature loss of primary molars by using removable space maintainer and functional appliances. In orthodontic practice, the mandibular rest position and the possibility of taking construction bite have been as the criteria for evaluation of functional factors involved in anterior crossbite. Functional anterior crossbites, if left untreated, may have deleterious effects on the development and function of craniofacial complex and TMJ. Objectives of the treatment were as follows: 1) to recover vertical dimension 2) to eliminate functional disharmony 3) to correct anterior reversed occlusion 4) to attain good facial esthetics 5) to prevent unfavorable growth of jaw & dentition Characterized craniofacial morphology resulting from the premature loss of deciduous molars could be recovered following the correction of crossbite. Therefore, it is recommended that in orthodontic diagnosis of functional anterior crossbite due to premature loss of deciduous molars, the craniofacial abnormality affected by that should be considered.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.133-140
• /
• 1979

The author compared patients showing two extremes of incisor vertical relationship to find out differences in craniofacial morphology which might influence face height and incisor overbite. The subjects consisted of 53 open-bite cases and the same number of deep-bite cases. The results were as follows: 1. On the average, the lower face height was significantly greater in open-bite cases than in deep-bite cases. 2. In open-bite cases, gonin-menton length was significantly greater than in deep-bite cases. In deep-bite cases, anterior cranial base length and posterior cranial base length were significantly greater in open-bite cases. 3. The jaw angle was significantly greater in open-bite cases. 4. The gonion-menton-nasion angle was significantly greater in deep-bite cases. 5. From geometric standpoint, the increase of jaw and joint angle would increase lower face height, but these two showed negative correlation. 6. The sizes of the jaw and joint angle might be factors of open-bite or deep-bite, but these were not the only variables that determined lower face height. 7. In open-bite cases, there was a closer correlationship between lower face height and the other linear measurments than in deep-bite cases. In deep-bite cases, there was a closer correlationship between lower face height and the other angular measurements than in open-bite cases. 8. Considering both linear and angular measurements of facial polygon, all contributed significantly to the lower face height. The nonsignificant variables were jaw and joint angle in open-bite cases, and anterior cranial base length, jaw angle, and joint angle in deep-bite cases.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.149-165
• /
• 1999

The pathomechanism of obstructive sleep apnea(OSA) is not clearly elucidated. The possible mechanisms are pathologic reduction of pharyngeal muscular tonus during sleep, abnormal anatomical stenosis of nasopharyx or a combination of the above two mechanisms. It is very important to find the cause(anatomical location or pathologic dynamic change) of OSA in order to treat it. Cephalometric analysis in patients with obstructive sleep apnea is a good method for evaluating anatomical morphologic change but it cannot give any information about the dynamic changes occurring during sleep. On the contrary, nasopharyngeal endoscopy offer 3 dimensional image and information about the dynamic changes. Accordingly, these two diagnostic tools can be utilize in the diagnosis and treatment planning of OSA Cephalometric analysis of craniofacial skeletal and soft tissue morphology in 53 patients with OSA and 43 controls was performed and cephalometric analysis and nasopharygeal endoscopy were performed in 9 patients with OSA in order to come up with individualized therapy plans. Following results were obtained ; Patients with OSA showed 1. body weight gain 2. clockwise mandibular rotation 3. increased anterior lower facial height 4. inferiorly positioned hyoid bone 5. increased length of soft palate 6. decreased sagittal dimension of nasopharyx 7. increased vertical length of inferior collapsable nasopharyx 8. increased length of tongue Through cephalometric analysis and nasopharygeal endoscopy(mutually cooperative in diagnosis), 9. one can find the possible origin of OSA and make a adequate individualized therapy plan and predict accurate prognosis. Cephalometric analysis and nasopharygeal endoscopy are highly recommended as a diagnostic aid in OSA patients

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2014

Purpose: The aim of this study was to investigate differences between the morphology of the mandibular symphysis and four facial skeletal types. Materials and Methods: 40 cone-beam computed tomographies were selected and classified in to 4 groups according to their vertical and anterior-posterior skeletal patterns. The bone volume ($mm^3$) of the symphysis, the cross sectional area corresponding to the 4 mandibular incisors' axis: the cross sectional area of total bone ($mm^2$), the area of the cancellous bone ($mm^2$) and the thickness (mm) of labial and lingual alveolar bone at 2 mm, 3 mm under the cemento-enamel junction (CEJ) were measured. General linear model (GLM), Kruskal-Wallis test and Tukey honestly significant difference (HSD) test were subsequently used for statistical analysis. Results: The lingual cortical bone thickness of the lateral incisors at 2, 3 mm under CEJ was greater in the Class I low angle group than the other 3 groups (P < 0.05). There were no statistically significant differences in the volume of the mandibular incisor bony support, cross-sectional area of total bone and cancellous bone at the mandibular incisor' axis. Conclusion: Patients in Class I, low angle group have a thicker lingual mandibular symphysis than Class I, high angle patients.

• The korean journal of orthodontics
• /
• v.40 no.2
• /
• pp.77-86
• /
• 2010

Objective: The purposes of this study were to evaluate the reproducibility and reliability of head posture obtained by registering outer canthus as a soft tissue landmark with the Outer Canthus Indicator (OCI). Methods: Twenty-one adults with normal facial morphology were enrolled in this study (mean age $27.5\;{\pm}\;1.72$ years). To register initial head posture, height of the outer canthus from the ear rod plane was measured using OCI. Head posture was reproduced by moving the head upwards and downwards until the outer canthus was in a straight line with the indicator set at a registered height. After the head posture is reproduced by two operators after two days, lateral photographs were taken. Computerized photometric analyses of the photographs were performed. Results: The head rotations around the transverse axis were $0.69\;{\pm}\;0.43^{\circ}$, $0.98\;{\pm}\;0.65^{\circ}$ from each of the two operators. Standard errors were $0.09^{\circ}$ and $0.14^{\circ}$ each, which were similar to results from past research findings. There were no significant differences between the data from the two operators (p > 0.05). There were no correlations between the head rotation around the horizontal and vertical axes (p > 0.05). Conclusions: The present study suggests that OCI-registered head posture may minimize errors from vertical head rotation in cephalometry and photometry.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.49.1-49.9
• /
• 2016

Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.