• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.388-395
• /
• 2013

PURPOSE. The purpose of this study was to estimate the effects of occlusal stability to identify action mechanisms of mouthguards, known to have a modulatory effect on limb muscle function. MATERIALS AND METHODS. This study included 20 male subjects to perform the isokinetic muscle tests and the Wingate anaerobic power test on both knee joints under five closed-mouth conditions: without or with 4 types of mouthguards with thickness of 2 mm based on premolar area: (1) full-coverage, (2) anterior partial-coverage, (3) right posterior partial-coverage, and (4) left posterior partial-coverage. The obtained results were subjected to One-way ANOVA with repeated measures, followed by post hoc test of the contrast method (${\alpha}$=.05). RESULTS. There was no significant difference between the closed position with and without a full-coverage mouthguard in all variables. However, significant differences were observed between with and without a partial-coverage mouthguard in muscular endurance during extension of the left knee, muscular power and endurance during flexion of the right knee. Additionally, significant differences were found between occlusal states with full- and partial-coverage mouthguards in muscular power and endurance during extension of the left knee. CONCLUSION. These findings indicate the elevation of vertical dimension by 2 mm or the inducement of occlusal stability had little effect on isokinetic muscle strength and anaerobic performance, while uneven distribution of occlusal force might have some positive effects.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.14 no.1
• /
• pp.17-26
• /
• 1984

The purpose of this study was radiographic analysis of the morphology of maxillary sinus in adolescents and adults. In order to analize the morphology of maxillary sinus in view point of anteroposterior width of medial wall, vertical distance between antral floor and nasal floor level, anterior extension, distance between antral floor and maxillary 1st molar apex, and types of lower border of maxillary sinus, specialized maxillary projection and periapical view with paralleling technique was taken. The author examined orthopantomograms and intraoral standard views taken from 400 adolescents and adults ranged 15-65 year-old. The obtained results were as follows: 1. The antero-posterior width of medial wall of maxillary sinus was 32.80mm in 15-19 year-old group, 33.86㎜ in 20-24 year-old group, 34.09㎜ in 25-29 year-old group, and 33.67㎜ in 30-65 year-old group, and the left maxillary sinus was somewhat smaller than the right. 2. The vertical distance between antral floor and nasal floor level was 8.49㎜ in 15-19 year-old group, 9.05㎜ in 20-24 year-old group, 8.95㎜ in 25-29 year-old group, and 8.32㎜ in 30-65 year-old group. 3. The order of anterior extension of maxillary sinus were distal half of canine, mesial half of canine, mesial half of 1st premolar, and distal half of 1st premolar. 4. The distance between antral floor and maxillary 1st molar were 4.36㎜ in 15-19 year-old group, 4.77㎜ in 20-24 year-old group, 3.58㎜ in 25-29 year-old group, and 2.33㎜ in 30-65 year-old group. 5. The order of the types of lower border of maxillary sinus were entire downward type, close type, partially downward type, waving type, separating type, and indistinct. In the types of antral floor, there was a tendency to increase the seperating type with age.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.303-316
• /
• 1993

The purpose of this study was to analysis the stress distribution induced by three unit PFM bridges and various cantilever bridges replacing maxillary latersal incisor. The simplified two-dimensional photoelastic models used for this study was contructed in the folio- wing way. CR/R ratio was designed to be 1 : 1, 1 : 1.25 and 1 : 1.5. The pontics of cantilever bridge supported by maxillary canines consisted of wrap-around type, rest-extension type, and simple type. 3-unit PFM bridge was constructed with traditional method. 1kg vertical static load was applied on the center of the incisal edge of the pontic. The stress pattern was examined and recorded by photography. The results obtained were as follows ; 1. The magnitude of stress on the abutment root apex area of a traditional 3-unit bridge was the lowest. 2. The model of cantilevered pontic with a rest showed the relatively well distributed stress around the abutment tooth. The model with simple pontic generated the greatest stress concentration in the supporting structure of the abutment tooth. 3. As the height of bone level reduced, the rotational and vertical force increased around the abutment tooth. 4. The stress concentration of the 3-unit bridges occured on the root apex and stress concentration of the cantilever briage occured on the root apex and cervix area, 5. In the case of the cantilever bridge, stress concentrated distally on the root apex area of the abutment tooth and additional stress was observed mesially on the upper part of the root. Especially in the case of the simple pontic, was phenomenon was more apparent than the others. 6. Force applied to cantilevered pontic was transmitted to the adjacent central incisor through the contact surface. Stress was markedly observed on the mesial cervix area in the case of simple pontic and on the root apex area in the case of wrap-around type and rest-extension type.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.3-12
• /
• 2018

The present remodeling makes almost no difference from rebuilding as all the building materials are removed remaining frame structure only. And, in case of vertical extension of building, higher construction cost and safety problem occur. The Ministry of Land, Transport and Maritime Affairs, therefore, recommends customized remodeling that can be made in light of the resident' needs such as parking lot, elevator, bathroom, and room for the alternative of remodeling of vertical extension of building. The purpose of this study is to present real data that can be referred to the constructor's decision making before starting the remodeling, by investigating and analyzing the weight and importance between evaluation factors for customized remodeling at the completed time of remodeling. Accordingly, the factors were divided into environmental factor, social factor, and economical factor, and the survey was performed for the residents living in remodeling houses. In addition, for the professionals, AHP (Analytic Hierarchy Process) has been carried out for the priority in the customized remodeling. For environmental factor, the level of importance made difference from that before remodeling, except parking level. For social factor, every item, including psychological satisfaction and community satisfaction, made difference. For economical factor, the recognition level of importance in rent made difference, except sale price of the factor for price satisfaction. In case of the factor for cost satisfaction, it was checked that construction cost and administration cost both could be considered important. As a result of AHP, the most importantly emphasized item was construction cost, and sale price, administration cost, residence structure, and parking lot were followed by priority in order. This study could contribute to reliably settle down customized remodeling by giving reasonable and substantial help from the analysis of the differences in the customized remodeling items before/after the remodeling.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.5
• /
• pp.131-142
• /
• 2024

To analyze the preloading effects and the load distribution ratio between existing piles and reinforcing piles during vertical extension remodeling, pilot tests were conducted. Previous studies on load distribution typically involved small-scale experiments or numerical simulations. The stiffness of piles used in load distribution designs is often estimated using empirical formulas, which exhibit significant variability. In this study, steel reinforcing piles were installed adjacent to existing PHC piles at an apartment construction site. The actual stiffness of the individual piles was determined through static load tests and compared with empirical formula predictions. The pilot tests (full-scale load-distribution tests), applying column loads simultaneously to the existing and reinforcing piles, demonstrated that column loads are distributed based on the stiffness ratio of each pile. The pilot test outcomes were further compared with long-term measurement data. A smart preloading system was developed in this study to address the preloading loss observed in previous systems, and its applicability was validated through full-scale tests.

• Journal of the Korea Convergence Society
• /
• v.12 no.6
• /
• pp.75-81
• /
• 2021

(Research background and purpose) Urban development has also had a significant impact on the eco-friendly industry. In the public environment, citizens are stressed in many areas, which has really made them need a natural ecological environment. Therefore, it is necessary to improve the environment into an eco-friendly urban public facility that breathes the urban environment space inside the building with plants. To this end, we want to show that the urban environment can be improved through vertical gardens. And through this, we want to contribute to the popularization of vertical gardens. (Research Methodology) we will analyze the problems of the current public environment in the city and look at the supplementation around vertical gardens. (Result) A study of the public environment in the city found problems such as gloomy environment, poor use of space, dim color, and poor air quality, and wanted to create a vertical garden to provide a pleasant shelter. These vertical gardens have influenced urban public places with improved aesthetics, increased social value, insulation and soundproofing effects of buildings, reduced urban heat island effects, and increased urban green appearance. (Conclusion)This study uses vertical gardens in public spaces to design public spaces that are more comfortable and share mental and physical health together.

• Economic and Environmental Geology
• /
• v.46 no.4
• /
• pp.313-327
• /
• 2013

In the study, three-dimensional geostatistical simulations on McMurray Formation which is the largest oil sand reservoir in Athabasca area, Canada were performed, and the optimal site for steam assisted gravity drainage (SAGD) was selected based on the predictions. In the selection, the factors related to the vertical extendibility of steam chamber were considered as the criteria for an optimal site. For the predictions, 110 borehole data acquired from the study area were analyzed in the Markovian transition probability (TP) framework and three-dimensional distributions of the composing media were predicted stochastically through an existing TP based geostatistical model. The potential of a specific medium at a position within the prediction domain was estimated from the ensemble probability based on the multiple realizations. From the ensemble map, the cumulative thickness of the permeable media (i.e. Breccia and Sand) was analyzed and the locations with the highest potential for SAGD applications were delineated. As a supportive criterion for an optimal SAGD site, mean vertical extension of a unit permeable media was also delineated through transition rate based computations. The mean vertical extension of a permeable media show rough agreement with the cumulative thickness in their general distribution. However, the distributions show distinctive disagreement at a few locations where the cumulative thickness was higher due to highly alternating juxtaposition of the permeable and the less permeable media. This observation implies that the cumulative thickness alone may not be a sufficient criterion for an optimal SAGD site and the mean vertical extension of the permeable media needs to be jointly considered for the sound selections.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.63-70
• /
• 2012

In this paper an extension to an original active shape model(ASM) for facial feature extraction is presented. The original ASM suffers from poor shape alignment by aligning the shape model to a new instant of the object in a given image using a simple similarity transformation. It exploits only informations such as scale, rotation and shift in horizontal and vertical directions, which does not cope effectively with the complex pose variation. To solve the problem, new shape alignment with 6 degrees of freedom is derived, which corresponds to an affine transformation. Another extension is to speed up the calculation of the Mahalanobis distance for 2-D profiles by trimming the profile covariance matrices. Extensive experiment is conducted with several images of varying poses to check the performance of the proposed method to segment the human faces.

• Journal of Agricultural Extension & Community Development
• /
• v.18 no.2
• /
• pp.315-333
• /
• 2011

Korea and China have a similar agricultural background and they have an analogical culture and custom of food. In addition, they are located close. Thus, their agricultural sectors easily have effected each other. The purpose of this study is to review the history and situation of Chinese agribusiness, to analyze the status of Chinese investing policy which is varied after China joining in WTO, and to suggest the ways that Korean companies can successfully invest in the Chinese agribusiness sector. In addition, we explore the cases that foreign companies in Hongkong invest in the Chinese agribusiness sector. Korean companies must have a special knowledge about Chinese laws and custom of business. They also have to make a good partners who help their business. Second, before Korean companies investing in the Chinese agribusiness sector, they must carefully choice investing items. These items have to satisfy several conditions, accessing to international market as well as Chinese market and that politic assistance of Chines government is rendered. Third, when Korean companies invest in the Chinese agribusiness sector, the scale of invest would better not be large. In addition, Korean companies have to make a joint-venture company in China and build vertical integration.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.67-79
• /
• 2003

The purpose of this study is to investigate the effective skill motion through the kinematic analysis of the Yurchenko Streched motion in new horse vaulting. The subjects in this study were 3 male gymnasts who were ranked as national athletes. After the 3D motion analysis, kinematic variables were analyzed to comparison with the difference between this study and the previous study(Yang, D. Y and Lee, C. S, 1999). As a result, the following conclusions was drawn; 1. In the board contact phase, this study showed a shorten contact time to maintain in condition highly extension of hip and hee angle than the previous study. 2. In the pre-flight phase, this study appeared more shortly flight duration time and horizontal flight displacement than the previous study. 3. In the horse contact phase, the contact duration time and horizontal displacement of COG shortened than the previous study, but appeared to the fast horizontal and vertical velocity and highly extension of shoulder an. 4. In the post-flight phase, a stable horse contact appeared to the increase of the flight duration time and the apex height during the post-flight. And it showed that these results have a stable and good landing.