• 제목/요약/키워드: Vertical drain

검색결과 228건 처리시간 0.024초

Final Settlement Prediction Methods of Embankments on Soft Clay

  • Lee, Dal-Won;Lim, Seong-Hun
    • 한국농공학회지
    • /
    • 제42권
    • /
    • pp.68-77
    • /
    • 2000
  • Analyses, in which load was regarded as instant load and gradual step load, respectively, were performed with data measured on a gradually loaded field, and the results were inspected to find the effect of load conditions, and the final settlements which were predicted by Hyperbolic, Tan's, Asaoka's, and Monden's methods were compared with each other. Settlement curves in which load was regarded as instant load and gradual step load being to coincide at twice the time of duration of embankment. On the ground installed vertical drain, from the results of Hyperbolic, Tan's, Asaoka's, Monden's, Curve fitting I, and Curve fitting II (simple, carrillo) methods it was concluded that Asaoka, Curve fitting I, and Curve fitting II methods are reliable for prediction final settlement with back analysis.

  • PDF

Stochastic cost optimization of ground improvement with prefabricated vertical drains and surcharge preloading

  • Kim, Hyeong-Joo;Lee, Kwang-Hyung;Jamin, Jay C.;Mission, Jose Leo C.
    • Geomechanics and Engineering
    • /
    • 제7권5호
    • /
    • pp.525-537
    • /
    • 2014
  • The typical design of ground improvement with prefabricated vertical drains (PVD) and surcharge preloading involves a series of deterministic analyses using averaged or mean soil properties for the various combination of the PVD spacing and surcharge preloading height that would meet the criteria for minimum consolidation time and required degree of consolidation. The optimum design combination is then selected in which the total cost of ground improvement is a minimum. Considering the variability and uncertainties of the soil consolidation parameters, as well as considering the effects of soil disturbance (smear zone) and drain resistance in the analysis, this study presents a stochastic cost optimization of ground improvement with PVD and surcharge preloading. Direct Monte Carlo (MC) simulation and importance sampling (IS) technique is used in the stochastic analysis by limiting the sampled random soil parameters within the range from a minimum to maximum value while considering their statistical distribution. The method has been verified in a case study of PVD improved ground with preloading, in which average results of the stochastic analysis showed a good agreement with field monitoring data.

관입식 통수능 실험의 수치해석 (Numerical Analyses about Test Results of Discharge Capacity Apparatus Using Penetration Method)

  • 유남재;우영민;전상현
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.720-728
    • /
    • 2009
  • This thesis is results of numerical analyses about test results of discharge capacity apparatus using penetration method. Applicability of numerical approach with FEM technique, using Cam-clay model, was confirmed by analyzing the results of standard consolidation test before analyzing test results of discharge capacity apparatus using penetration method. Thus, input parameters for the model was convinced to be appropriate. For numerical analyses about test results of discharge capacity apparatus using penetration method, identical initial and loading conditions during tests were applied to simulate test results correctly. Effects of ground disturbance resulted from installment of vertical drains on the behaviors of consolidation were also simulated. Applicability of numerical approach was investigated by comparing test results with numerical ones. As results of them, both of consolidation settlement were found to be in good agreements so that its applicability was confirmed. As results of numerical estimation, degree of consolidation with the condition of considering smear zone was found to be delayed, compared with results without smear zone. On the other hands, parametric numerical analyses of changing parameters related to smear zone such as permeability and size of smear zone and permeability of vertical drain were also carried out.

  • PDF

말합연약식반의 변형위석에 관한 수치해석 (Numerical Analysis on Deformation of Soft Clays Reinforced with Rigid Materials)

  • 강병선;박병기;정진섭
    • 한국지반공학회지:지반
    • /
    • 제1권2호
    • /
    • pp.27-40
    • /
    • 1985
  • 본고는 기약지반변형해석에 이용될 범용 program을 개발하고 이를 이용하여 성토부끝에 sheet pile을 타설하거나 혹은 성토부아래의 연약정토지반을 개취하였을 때의 변형억제효과를 연구한 것이다. 본고에 적용된 압밀리론으로서 Biot의 압밀방정식과 구성방정식으로서 탄소성리론에 근거한 modified Cam-clay 이론을 적용하였고 유한요소해석으로서는 Christian-Boehmer계를 도입하여 program화한 것이다. 그 주요한 결론은 다음과 같다. 1. 속변지반의 침하효과에 관해서는 sheet pile이나 심우혼합처새깊이를 자지층까지 관입하여 시공하고 그 자신의 침하가 없을 경우에만 유효하다. 2. 흔히 사용되는 sheet pile대책공법은 통상의 steel sheet pile의 각성으로서는 성토직후의 봉기, 측방변위의 억제효과는 기대할 수 없다. 3. Sheet pile에 대한 예상론인 사용방법은 성토하부에 세밀을 촉진하기 위해 vertical drain을 설치하고 점증재하 방법만이 확실한 효과가 있다. 4. 체층혼합처리공법은 예상한 바와 같이 그 자종가 강성이 클수록 침하억제핵과가 있다. 특히 grouting을 통한 지반강화가 곧장 주변지반의 변형억제효과가 있다고 단정하는 것은 그 강성 까 관련하여 신중히 고려하여 결정해야 한다.

  • PDF

토목섬유 연직배수재를 활용한 토양증기추출복원시스템의 수치해석 (Numerical Analysis of Soil Vapour Extraction Remediation System using Prefabricated Vertical Drain)

  • 신은철;박정준;이규웅
    • 한국지반신소재학회논문집
    • /
    • 제7권4호
    • /
    • pp.1-8
    • /
    • 2008
  • 토양증기추출공법(SVE)은 불포화 지반상태에서 휘발성 유기화합물(VOCs)과 유류오염 물질을 제거하는데 효과적이고 경제적인 공법중의 하나이다. 그러나 토양증기추출공법은 투기계수가 1 Darcy보다 작은 실트질 흙과 같이 낮은 투기계수를 가진 지반에서는 비효율적이다. 본 연구의 목적은 연직배수재를 토양증기추출기술중 관정으로서의 적용성과 공기 흐름 패턴에 대한 해석적 방법이다. 즉, 연직배수재를 이용한 실내 모형실험의 공기 추출 시험 결과를 바탕으로 하여 단일 배수재로서의 수치해석 모델을 검증하였다. 또한, 추출 시험결과로 투기계수를 결정하여 단순 분석적 접근의 유효성도 평가하였다.

  • PDF

Electrical Characteristics of Tunneling Field-effect Transistors using Vertical Tunneling Operation Based on AlGaSb/InGaAs

  • Kim, Bo Gyeong;Kwon, Ra Hee;Seo, Jae Hwa;Yoon, Young Jun;Jang, Young In;Cho, Min Su;Lee, Jung-Hee;Cho, Seongjae;Kang, In Man
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권6호
    • /
    • pp.2324-2332
    • /
    • 2017
  • This paper presents the electrical performances of novel AlGaSb/InGaAs heterojunction-based vertical-tunneling field-effect transistor (VTFET). The device performance was investigated in views of the on-state current ($I_{on}$), drain-induced barrier thinning (DIBT), and subthreshold swing (SS) as the gate length ($L_G$) was scaled down. The proposed TFET with a $L_G$ of 5 nm operated with an $I_{on}$ of $1.3mA/{\mu}m$, a DIBT of 40 mV/V, and an SS of 23 mV/dec at a drain voltage ($V_{DS}$) of 0.23 V. The proposed TFET provided approximately 25 times lower DIBT and 12 times smaller SS compared with the conventional $L_G$ of 5 nm TFET. The AlGaSb/InGaAs VTFET showed extremely high scalability and strong immunity against short-channel effects.

콘 관입저항치를 이용한 수직배수재 타설심도 결정에 관한 연구 (A Study on the Determination of Construction Depth of Vertical Drain by Cone Resistance)

  • 김연정;김남호;신윤섭
    • 기술발표회
    • /
    • 통권2006호
    • /
    • pp.261-269
    • /
    • 2006
  • 최근 피조콘시험은 과거 일반적으로 사용되었던 표준관입시험과 함께 연약지반의 특성을 평가하기 위해 빈번히 사용되고 있다. 본 연구에서는 하부지반의 지층상태를 파악하고 설계를 위한 연약지반 심도 결정 및 시공시 수직배수재 타설심도 결정시 그 신뢰도를 향상시키기 위해서 표준관입시험결과(N치), 선행압밀하중(pc), 수직배수재 타설시 관입에너지와 피조콘시험을 통한 콘 관입저항치($q_c$)와의 관계를 분석하였다. 대상 지역별로 일정한 표준관입저항치를 기준으로 평균 연약지반심도를 결정하여, 동일한 심도에서 피조콘관입저항치를 값을 분석한 결과 $q_c$=(1.09~1.63)N, 선행압밀하중을 고려한 결과 $q_c$=(1.21~1.98)N의 관계를 나타내었다. 또한 수직배수재 타설시 관입에너지와 피조콘시험을 통한 콘 관입저항치($q_c$)와의 관계를 분석한 결과 평균적으로 피조콘 관입저항치 10kgf/$cm^2$의 경우 수직배수재 타설 시 관입저항치는 약 65~70.0kgf/$cm^2$의 값을 나타내였다.

  • PDF

수치해석 방법에 의한 연직배수시스템의 오염토양 복원효율 비교분석 (The Comparison of Remediation Efficiency for Contaminated Soils under Vertical Drain System by Numerical Analysis Method)

  • 신은철;이성철;박정준
    • 한국지반신소재학회논문집
    • /
    • 제10권1호
    • /
    • pp.29-36
    • /
    • 2011
  • 오염지반 복원을 목적으로 사용한 연직배수시스템의 적용성 평가를 위하여 영향 인자에 대한 지반공학적 특성을 기초로한 파일럿 규모의 실내 오염복원 실험시 오염물질의 복원 효율을 분석하였다. 또한, 도출된 결과를 바탕으로 유한요소 및 유한차분방법에 의한 수치해석을 수행하였으며, 해석시 적용된 물성값에 대한 매개변수를 평가하였다. 오염복원 모형실험과 수치해석에서 최소한계농도비를 기준으로 하여 오염복원율 해석 결과, 지반이 조밀한 경우 최소한계 농도비 도달시간이 더 길어지며, 지속시간에 따른 농도분포를 살펴보았을 때, 농도는 주입배수재를 중심으로 그 주변에서 더 빠르게 제거되고, 반면에 추출배수재 주변에서는 농도가 더 높게 나타남을 알 수 있었다.

모형실험을 통한 토목섬유 적용에 따른 쇄석배수층 통수능 평가 (Evaluation of Discharge Capacity for Gravel mat due to Geosynthetic Using Calibration Chamber Test)

  • 김재홍;임은상
    • 한국지반신소재학회논문집
    • /
    • 제13권2호
    • /
    • pp.11-20
    • /
    • 2014
  • 대단위 부지조성을 위해 해안연약지반을 매립후 공기단축 및 안정된 부지를 조성하고자 대부분 연직배수재를 이용하여 지반 개량을 시행한다. 이 과정에서 연약지반내 설치한 연직배수재를 통하여 지반내 간극수가 지표면의 수평배수층으로 이동하여 외부로 배출된다. 과거에는 이 수평배수층 재료로 모래를 사용하였으나 근래에는 재료 품귀 및 단가 상승으로 쇄석으로 조성하는데 상부 성토층과 혼재를 방지하기 위하여 토목섬유(P.P. Mat)를 설치한다. 토목섬유의 설치시 재료비 및 시공비가 발생하여 토목섬유 적용 필요성에 대하여 실내에서 모형토조를 이용하여 단계별로 하중을 달리하고 유입량을 변화시켜 실험한 결과 토목섬유 적용에 따른 통수능에는 큰 차이가 없음을 알 수 있었다.