• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.141-151
• /
• 2020

Since it was first studied in 1980, solar energy analysis model for geographic information systems has been used to determine the approximate spatial distribution of terrain. However, the spatial pattern was not able to be grasped in 3D (three-dimensional) space with low accuracy due to the limitation of input data. Because of computational efficiency, using a constant value for the brightness of the sky caused the simulation results to be less reliable especially when the slope is high or buildings are crowded around. For the above reasons, this study proposed a model that predicts solar energy of vertical surfaces of buildings with four stages below. Firstly, CIE (Commission Internationale de l'Eclairage) luminance distribution model was used to calculate the brightness distribution of the sky using NREL (National Renewable Energy Laboratory) solar tracking algorithm. Secondly, we suggested a method of calculating the shadow effect using ray tracing. Thirdly, LOD (Level of Detail) 3 of 3D spatial data was used as input data for analysis. Lastly, the accuracy was evaluated based on the atmospheric radiation data collected through the ground observation equipment in Daejeon, South Korea. As a result of evaluating the accuracy, NMBE was 5.14%, RMSE 11.12, and CVRMSE 7.09%.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.265-272
• /
• 2004

This study was conducted to investigate the community structure and distributional pattern of meiobenthos in the deep-sea bottom of the Clarion-Clipperton Fracture Zone of northeastern Pacific during July 2001. Examination of sediment samples collected on the eight survey station showed that there were 10 different types of meiobenthos. The most abundant meiobenthic animals were nematodes in all stations. Sarcomastigophorans, benthic harpacticoids were next abundant meiobenthos. Vertical distribution of meiobenthic animals showed the highest individual numbers in the surface sediment layers of 0-1 cm depth and showed more steep decreasing trend as sediment gets deeper on the stations of high latitude located in $16-17^{\circ}N$. Horizontal distribution of meiobenthic animal in the study area within CCFZ showed high densities of meiobenthos at the stations had few manganese nodules on their sediment surface in the site of low latitude. For size distribution analyses showed that animals which fit into the sieve mesh size of 0.063 mm were abundant.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.103-108
• /
• 2017

The amount of delivered parcels have been increasing according to the change and expansion of consumption pattern through e-commerce, and they are required to minimize breakout or failure under the delivery. In this study, we measured and analyzed the distribution environment data (vibration and impact) occurred in the packaging, which were prepared with 5 types by the weight and dimension, distributed from Seoul to Busan in Korea by 2 parcel delivery service companies through e-commerce order. Date showed the parcels had 3-5 times of drop impact and 0.3-0.7 m of drop height on average, and 0.8 Grms of vibration acceleration from equivalent equation to the vertical direction. The significant gap in service quality was not found between 2 parcel delivery service companies. This study is expected to be useful for designing the suitable packaging in order to enhance safe transportation of the delivered packaging, and furthermore useful for developing Korean testing method for Field-to-Lab simulation.

• Nuclear Engineering and Technology
• /
• v.10 no.2
• /
• pp.79-86
• /
• 1978

The object of this study was to obtain data on air-distributions in two-phase up flow in vertical rod-bundle test-section. The test-section in this study was a hexagonal shaped 61-rod bundle where each rod was wrapped with helical spacers. The variables were flow rates of air and water and air inlet positions. Experimental data were obtained at the outlet of the test-section. The experiments were performed in two parts. Firstly, data were taken at increasing flow rates of air keeping water flow rates constant, and secondly, at simultaneous increase of air and water flow rates. At each flow condition, air supply position could be changed to 4 different positions. Data obtained by electrical void-needle technique were analyed and are presented here in graphical forms for comparison. The results of this study demonstrate qualitatively that air-distribution tends to be more uniform as water flow rates are increased. The air supply positions have noticeable effects on the pattern of air-distribution.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.37-43
• /
• 2019

Obstacle limitation surfaces are imaginary space surfaces that must be clear of obstacles for the aircraft to safely take off and land on the aerodrome. These surfaces are closely related to the safety of the VFR aircraft, which require a pilot to be able to see outside the cockpit, to control the aircraft's altitude, navigate, and avoid obstacles and other aircraft. The Republic of Korea, which has a lot of restrictions on the use of airspace, cannot provide a rich operating environment for VFR aircraft. Under these circumstances, safer operation will not be guaranteed if additional factors that directly or indirectly affect existing VFR routes, such as drone delivery services. This study analyzes and models the track distribution of each VFR section based on radar track data around a specific airport. Through this study, we estimate the three-dimensional space for VFR aircraft and provide the data for future research such as airspace analysis of VFR corridors and correlation with obstacle limitation surfaces.

• Atmosphere
• /
• v.15 no.3
• /
• pp.149-153
• /
• 2005

A balloon-borne Optical Particle Counter (hereafter "OPC Sonde"), which was developed by the atmospheric research group of Nagoya University, is used for getting the information of vertical profile of particle size and concentration in Anmyeon ($36^{\circ}32^{\prime}N$ $126^{\circ}19^{\prime}E$) on 18 March 2005. A range of five different particle sizes is shown in the vertical profile of aerosol number density estimated from the OPC Sonde. It was found that small size particles have vertically larger aerosol number density than relatively big ones. For all size ranges the vertical aerosol number density shows a decreased pattern as the altitude becomes higher. The aerosol number density of $0.3{\sim}0.5{\mu}m$, $0.5{\sim}0.8{\mu}m$, $0.8{\sim}1.2{\mu}m$ size ranges at the 10km height, which is the tropopause approximately, are $1,000,000ea/m^3$, $100,000ea/m^3$, $10,000ea/m^3$ respectively. The data of OPC Sonde are also compared with the data of PM10 $\beta$-ray) and Micro Pulse Lidar which are operating at Korea Global Atmosphere Watch Observatory in Anmyeon.

• Ocean and Polar Research
• /
• v.30 no.1
• /
• pp.79-87
• /
• 2008

Hydroacoustic technique was used to analyze spatiotemporal stability and distribution of demersal fish aggregations in the coastal region to overcome some limitations of the existing methods such as net and diving. The survey was carried out in the Baekeum Bay on the south coast of Korea in January 2007. The bottom depth in the study site ranges from 7 to 25 m. In order to outline aggregations of demersal fish initial scanning using 200 kHz split-beam transducer was randomly conducted over the large area. Having detected fish aggregation in the specific region, intensive acoustic survey of irregular star pattern was carried out along 14 transects across the area in question. The results of the acoustic survey show that all demersal fish aggregations are concentrated about 5 m from sea bottom having a slight slope and remain steady with no spatial or temporal variations during acoustic survey. The hydroacoustic method used in this study offers a new approach to understand vertical and horizontal distribution, spatiotemporal stability, and biomass estimate of demersal fish aggregations in coastal regions. Additionally, the number of individual fish estimated from in situ acoustic target strength data can be used to understand the standing stock of demersal fish aggregation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.996-1003
• /
• 2002

Heat transfer characteristics were investigated for the falling film flowing down the outside of an electrically heated vertical tube. Water was used for the falling film, and its Reynolds number was varied in the range of 70～500. Because water is heated and evaporated as it flows down, both sensible and latent heat transfer should be considered. The effect of the surrounding air movement was investigated by changing the direction of the air injection; without air injection, parallel-flow, and counter-flow. For all cases, sensible teat transfer rate was almost linearly increased with the increasing film flow rate. It was found that the film heat transfer coefficient was hardly influenced by the parallel air flow. However, the counter-flow of air reduced the heat transfer coefficient, which might be caused by the uneven distribution or flooding of the film. At high heat flux, a sudden change of the film heat transfer coefficient was detected as the film flow rate reached the transition value. It is supposed that this phenomenon was caused by the change in the film flow pattern.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.49-58
• /
• 2018

Open-mode cracks could be commonly observed in layered rocks. A concept model is firstly used to explore the mechanism of the vertical cracks (VCs) in the top layer. Then the crack behaviour of the two-layer model is simulated based on a cohesive zone model (CZM) for layer interfaces and a plastic-damage model for rocks. The model indicates that the tensile stress normal to the VCs changes to compression if the crack spacing to layer thickness ratio is lower than a threshold. The results indicate that there is a threshold for interfacial shear strength that controls the crack patterns of the layered system. If the shear strength is lower than the threshold, the top layer is meshed by the VCs and interfacial cracks (ICs). When the shear strength is higher than the threshold, the top layer is meshed by the VCs and parallel cracks (PCs). If the shear strength is comparative to the threshold, a combining pattern of VCs, PCs and ICs for the top layer can be formed. The evolutions of stress distribution in the crack-bound block indicate that the ICs and PCs can reduce the load transferred for the substrate layer, and thus leads to a crack saturation state.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.385-397
• /
• 1992

Current measurements at 3 sections and numerical experiments were carried out in Masan Bay to understand the effect of the wind on the residual currents and pollutant transport. The vertical distribution of horizontal velocities were directly affected by the wind at the depths of 1m and 2m beneath the sea surface. Analysis of the velocity data suggested that changes in the vertical gravitational circulation contributed to the net circulation. The net transport of water through the northern part of the bay was observed to be landward, with wind-induced transport of about 100m super(3)/s. Hence, wind is concluded to be the dominant mechanism driving the net circulation in the northern area of Masan Bay. Numerical experiments are shown that when S wind with 5m/s blew, northern area of the bay was generated the horizontal circulation of clockwise and local gyre. On the contrary of those, N wind made her to the anti-clockwise. In the case of no wind, the tidal residual current(constant flow) is very small or neglected except the bay-mouth. The inflow or outflow pattern of the mouth is considered as the flows generated by tidal residual current only. The distance of wind-induced transport of pollutant was as long as 2 times of no wind during the one tidal period.