• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.43-61
• /
• 1991

Present - day inlay casting procedures have been developed for more than 100 years and experimentation has focused on the perfect adaptation to the cavity preparation. Marginal adaptation is considered to be an important indicator of the acceptability of the cast restotration, especially on the gingival margin. The purpose of this study was to evaluate the effects of a dissecting microscope and burnishing on vertical discrepancies, horizontal discrepancies, and cement thicknesson master die. Extracted premolars were prepared for class II gold inlays and master dies were made with conventional techniques. The experiments consisted of 4 groups. Group 1 : unaided eye, no burnishing on master die. Group 2 : unaided eye, burnishing on master die. Group 3 : microscope, no burnishing on master die. Group 4 : microscope, burnishing on master die. Cemented inlays were embedded in the hard resin and sectioned with microcutter through the gingival margins. The sectioned surfaces were polished with emery paper and finally with aluminum oxide powders. The results of the experiments were measured for vertical discrepancies, horizontal discrepancied and cement thickness under the scanning electron microscpe at the beveled gingival margin. The results of the study were summarized as follows. 1. Group 1 showed the vertical discrepancies of $81.6{\mu}m({\pm}48.6{\mu}m)$, horizontal discrepancies of $60.1{\mu}m({\pm}41.1{\mu}m)$, and cement thickness of $59.6{\mu}m({\pm}24.6{\mu}m)$. 2. Group 2 showed the vertical discrepancies of $78.6{\mu}m({\pm}30.9{\mu}m)$, horizontal discrepancies of $36.9{\mu}m({\pm}20.7{\mu}m)$, and cement thickness of $54.0{\mu}m({\pm}21.6{\mu}m)$. 3. Group 3 showed the vertical discrepancies of $57.5{\mu}m({\pm}26.4{\mu}m)$, horizontal discrepancies of $28.4{\mu}m({\pm}17.5{\mu}m)$, and cement thickness of $37.2{\mu}m({\pm}17.4{\mu}m)$. 4. Group 4 showed the vertical discrepancies of $56.7{\mu}m({\pm}35.0{\mu}m)$, horizontal discrepancies of $31.8{\mu}m({\pm}24.2{\mu}m)$, and cement thickness of $45.6{\mu}m({\pm}19.8{\mu}m)$. 5. Vertical discrepancies were not significantly different at any groups(p>.050). 6. Microscope groups(Group 3, 4) showed significantly improved horizontal marginal adaptation (p<.050). 7. Although cement thickness showed the subset of Group 3. 4, 2 and Group 4, 2, 1. Group 3 showed significantly smaller thickness than Group l(p<.050). 8. Finishing and polishing by means of a microscope produced significantly smaller discrepancies than doing so with the unaided eye(p<.050).

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.72-78
• /
• 1984

The notion that the axis of the shaft of the articulator must coincide the patient's mandibular transverse axis tells us the importance of locating the axis precisely. When using kinematic axis to transfer a cast to an articulator, the anatomic asymmetry of the contralateral points will result in certain distortion when the axis transferred to an articulator where the mechanical axis produces symmetry. In this study, after locating the true hinge axis point with Denar hinge axis locator, the discrepancies between true hinge axis point and arbitrary hinge axis point that was 13mm anterior from the posterior margin of center of trangus to the outer canthus of eye were measured. And the discrepancies between left and right true hinge axis point in the superoinferior and anteroposterior directions were measured. For this study, 20 dental students who have no missing teeth and no difficulties of mandibular movement were selected. Upper and lower cast of subjects were mounted on Denar Mark II articulator uisng Denar Slidematic face-bow and centric relation record for the measurement of discrepancies between left and right true hinge axis points. The results obtained as follows. 1. The mean distance from the arbitrary hinge axis point to the true hinge axis point was as follows. Right: horizontal distance; 1.99mm, vertical distance; 2.12mm, linear distance; 3.36 mm. Left: horizontal distance; 1.39mm, vertical distance; 2.06mm, linear distance; 2.09mm. Total: horizontal distance; 1.69mm, vertical distance; 2.09mm linear distance; 3.06 mm. 2. The 87.5% of true hinge axis points were within 5mm of the arbitrary hinge axis point. 3. The mean discrepancies between the right and left hinge axis point were 2.92mm in superoinferior direction and 4.74mm in anteroposterior direction. 4. When transferring the axis to the articulator, anatomic asymmetry between right: and left axis point produces in dislocation of cast on the articulator, and undesirable shift in esthetic tooth position will be resulted.

• 대한조선학회지
• /
• 제17권3호
• /
• pp.1-4
• /
• 1980

It is well known that discrepancies between measured and predicted ship motions are significant in the range of low frequencies. In this paper, the vertical ship motions in regular longitudinal waves in a shallow water are briefly discussed. The investigation is focussed on the role of wave exciting forces and moments to the motion responses in these low frequencies. It is confirmed that diffraction forces are in general small in a shallow water as one may expect. Furthermore the wave exciting forces and moments on a displacement-type ship will be larger practicularly in low frequencies, when the contribution of the diffraction effect is neglected. As a result of this fact theoretically predicted responses for the pitch motion becomes closer to the experimental one. The discrepancies for the heave motion, however, are still apparent.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권6호
• /
• pp.379-384
• /
• 2020

Objectives: We sought to identify a clinically useful method of analyzing orbital dystopia to aid in diagnosis and treatment planning and to quantify vertical discrepancies in eye level and variations in canthal tilt in Koreans. Patients and Methods: In 76 Korean patients with a mean age of 23.12 years, mean differences in the level of the pupils, lateral canthi, medial canthi, and canthal tilt were measured. The difference in pupil level was calculated from the perpendicular lines drawn from the midpupil area of each eye to the midline of the face to determine the amount of skeletal discrepancy of the eye. Soft tissue discrepancies were determined according to the vertical difference between the lines drawn from the lateral or medial canthus of each eye perpendicular to the midline of the face. The canthal tilt was determined from the inclination of a line connecting the lateral and medial canthi, then classified as class I, II, or III. Results: Mean differences in pupil level, medial canthi, and lateral canthi were 1.57±1.10 mm, 1.14±1.07 mm, and 2.03±1.64 mm, respectively. The mean degree of canthal tilt were 8.45°±3.53° for the right side and 8.42°±3.81° for the left side. No study participants presented with class III canthal tilt. The mean canthal tilt values for those with class I tilt were 3.21°±1.68° for the right side and 3.18°±1.63° for the left side, while, for those who had class II tilt, the values were 9.60°±3.66° for the right side and 9.54°±2.99° for the left side. Conclusion: The presented diagnostic method of orbital dystopia can be used to effectively establish a treatment plan that takes into consideration the patient's skeletal and soft-tissue discrepancies.

• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.3-19
• /
• 2022

Objective: The purpose of this study was to investigate the accuracy of one-step automated orthodontic diagnosis of skeletodental discrepancies using a convolutional neural network (CNN) and lateral cephalogram images with different qualities from nationwide multi-hospitals. Methods: Among 2,174 lateral cephalograms, 1,993 cephalograms from two hospitals were used for training and internal test sets and 181 cephalograms from eight other hospitals were used for an external test set. They were divided into three classification groups according to anteroposterior skeletal discrepancies (Class I, II, and III), vertical skeletal discrepancies (normodivergent, hypodivergent, and hyperdivergent patterns), and vertical dental discrepancies (normal overbite, deep bite, and open bite) as a gold standard. Pre-trained DenseNet-169 was used as a CNN classifier model. Diagnostic performance was evaluated by receiver operating characteristic (ROC) analysis, t-stochastic neighbor embedding (t-SNE), and gradient-weighted class activation mapping (Grad-CAM). Results: In the ROC analysis, the mean area under the curve and the mean accuracy of all classifications were high with both internal and external test sets (all, > 0.89 and > 0.80). In the t-SNE analysis, our model succeeded in creating good separation between three classification groups. Grad-CAM figures showed differences in the location and size of the focus areas between three classification groups in each diagnosis. Conclusions: Since the accuracy of our model was validated with both internal and external test sets, it shows the possible usefulness of a one-step automated orthodontic diagnosis tool using a CNN model. However, it still needs technical improvement in terms of classifying vertical dental discrepancies.

• The Korean Journal of Physiology
• /
• 제16권1호
• /
• pp.31-40
• /
• 1982

The present experiment was carried out to elucidate interrelation between the vestibular canals and the extraocular oblique muscles. In urethane anesthetized rabbits, excitatory or inhibitory effect of the canal was produced by three different methods; selective electrical stimulation of the ampullary nerve, bidirectional (ampullofugal or ampullopetal) lymphatic fluid flow, and rapid freezing of the canal. Changes of isometric tension as well as electro-myographic activity of the oblique muscles were recorded in the ipsilateral and contralateral eyes, by means of a polygraphic recorder, and the following results were obtained. 1) Electrical stimulation of a unilateral vertical or horizontal nerve caused contraction of superior oblique muscle and relaxation of inferior oblique muscle in the ipsilateral eye, and contraction of inferior oblique muscle and relaxation of superior oblique muscle in the contralateral eye. 2) Ampullofugal flow in a vertical canal and ampullopetal flow in a horizontal canal caused the oblique muscle responses which were identical to those responses produced by the electrical stimulation of the same canal nerve. 3) Rapid freezing of a vertical canal elicited the oblique muscle responses which were opposite to those caused by electrical stimulation of the same canal nerve. From the above experimental results, functional interrelation between the individual vestibular canal and bilateral extraocular oblique muscles were better elucidated. When these results were compared to those reported by previous investigators (Utzumi, Suzuki et al.), some important discrepancies were found between them. We ascribed such discrepancies to experimental errors of the previous investigators, since their results reflected theoretical contradictions in terms of vestibular eye movements.

• 대한치과교정학회지
• /
• 제27권4호
• /
• pp.643-659
• /
• 1997

두개 악안면 기형 환자의 종합적인 치료를 위해서는 입체적인 평가와 진단이 중요하다. 그러나 흔히 전후방적인 골격 평가에는 많은 분석 방법을 시행하고 있으나, 안모 비대칭과 상 하악골 횡적인 부조화의 진단을 위해 필요한 횡적 평가방법은 충분하지 못한 실정이다. 횡적인 부조화의 적절한 진단과 치료는 안정된 기능교합의 형성에 있어서 전후방 또는 수직적인 부조화보다 중요한 역할을 하며, 장기간의 안정성에도 영향을 미친다. 그리고 상하악의 횡적인 부조화에 따른 연조직의 변화가 제한되어 있기 때문에 시진을 통한 임상적 방법으로는 간과되기 쉬우며 더욱이 특징적인 안모 소견을 보이는 전후방 또는 수직적인 부조화와 동반된 경우에는 감별되기 어렵다. 그로 인해 정확한 진단과 치료를 위해서는 정상 안모에 관한 정모두부 방사선 계측학적 안모 비율의 평가가 필요하게 되었다. 본 연구는 1996학년도 연세대학교 신입생중에서 협조 가능한 정상 안모와 거의 정상 교합을 갖은 남녀 76명을 선정하여 안모 비대칭과 횡적인 부조화가 있는 악안면 기형 환자의 진단과 치료계획에 도움을 주는 자료를 얻고자 정모두부 방사선 계측사진을 이용하여 수평 및 수직 계측항목과 그 비율을 통계처리하여 다음과 같은 결과를 얻었다. 1. 정모의 수평 및 수직적인 계측항목과 그 비율의 평균값과 표준편차를 구하였다. 2. 정모의 폭경에 대한 고경의 비율은 0.837(남자: 0.836, 여자:841)이었다. 3. 상악골과 하악골간의 폭경비율은 0.747(남자: 0.745, 여자:0.752)이며, 높은 연관성을 나타내었다. 4. 두개 안면부 폭경들간에는 서로 연관성이 나타났다. (두개폭경, 관골전두봉합폭경, 안면폭경, 상악폭경, 하악폭경, 상악과 하악 구치부폭경) 5. 정모의 폭경이 증가할수록 안모고경과 다른 길이 계측치도 연관되어 증가하였지만 각도 계측값 ($Bj\ddot{o}rk$의 합, 하악평면각)의 감소와, 후전 안면고경 비율 증가로 인하여, Brachycephalic facial type의 안모 경향을 보였다. 이상의 결과는 악안면 기형 환자의 교정치료 및 악교정 수술치료의 계획에 기준치로써 사용될 수 있을 것이다.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.1-6
• /
• 2011

In order to find better performance of heat sink, in this research, different cases were analysed by changing number of slots and shape of fins. Round shape fins which have wide surface showed 24% better heat transfer rate than vertical fins. There were not big discrepancies between 1 slot and 2 slots fins. Consequently, for better performance of heat sink, developments for widening surface and better material for high heat transfer rate are needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권3호
• /
• pp.180-185
• /
• 2012

Purpose: An accurate preoperative analysis of the patient is essential in orthognathic surgery in order to acquire superior results. In profile, the location of the chin's position may change according to the neck's inclination. This may ultimately affect the amount of surgical movement. During acquisition of cephalometric radiographs, or in supine position, there is a discrepancy in the neck's inclination. This means that there are also various discrepancies between the actual profile and the various preoperative profile images. In the clinical situation, the decision in performing genioplasty usually lies in the analysis of the patient's profile on the operating table at the final stages of orthognathic surgery. This study aims to analyze the different preoperative profile images and to compare their discrepancies. Methods: Fifty eight patients undergoing orthognathic surgery were chosen. These patients were divided into three groups according to angle's classification of malocclusion, as class I, II or III. The right profile of these patients in centric occlusion was taken in natural head position (NHP). This was set as the 'actual profile image.' Another right profile image was taken on the operating table after insertion of the nasotracheal intubation and with muscle relaxants in effect. This was also taken in centric occlusion. The angle (denoted 'A') between the soft tissue glabella-pognion and the true vertical plane was found in the above-mentioned profile images and in the cephalometric radiographs. The differences of these values were analyzed. Results: There were differences in Angle 'A' in all of the preoperative images. These values were however, not statistically significant. Conclusion: In order to gain an esthetic profile during orthognathic surgery, the NHP is shown to be the most reliable position. Images reproducing such head positions should be used in the treatment planning process.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.567-580
• /
• 1999

Accurate reproduction of intraoral tissue is essential in the fabrication of fixed prosthesis. This selection of impression material and method is very important. In this study, vinyl polysiloxane type impression material $Panasil^{(R)}$ was used. Three impression methods ; one-step technique, individual tray technique, and individual tooth tray technique using the vinyl polysiloxane type bite registration material $Futar^{(R)}$ Occlusion, were used to take horizontal and vertical impression. Improved stone models were fabricated. The amount of occlusal surface discrepaneies, interabutment distance discrepancies, amount of marginal defect were evaluated with the $X-PLAN360d^{(R)}$ and photoscanning. The results were as follows. 1. There was no significant difference in occlusal surface according to the directions and techniques of impression taking. 2. There was no significant difference in interabutment distance discrepancies according to the directions and techniques of impression taking 3. There was no significant difference in marginal discrepancies according to the direction of impression taking but there was significant difference between one-step technique and individual tray technique, individual tooth tray technique (P<0.05). Taken together, these results suggest that individual tray technique and individual tooth tray technique are more accurate for impression taking than one-step technique.