• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.40-49
• /
• 2018

It is reported that the causes of unaesthetic proportion of anterior teeth vary widely. Especially, when the unaesthetic tooth proportion of the mandibular incisors arises due to the wear of the anterior teeth accompanied by the compensation of the alveolar bone, it may cause serious functional and aesthetic problems. In such case, it should be considered that the evaluation of vertical dimension and tooth proportion as well as smile line, soft tissue and hard tissue morphology. And, increase of vertical dimension or clinical crown lengthening followed by prosthodontic restorations is needed to improve the interdental mesial/distal, width/length ratio considering the anterior guidance. This case report demonstrates functional and aesthetic improvements through systematic diagnosis and treatment procedures in a 48-year-old male patient with unaesthetic anterior teeth proportion because of tooth wear accompanied by the compensation of alveolar bone and defect of several central incisors due to chronic periodontitis.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.242-248
• /
• 2022

Recently, through the development of CAD/CAM technology, it is also being used for fabricating dentures. Compared to conventional methods, when digital dentures are fabricated, the fabrication process is facilitated, and the number of visits to hospitals is reduced and errors are reduced. In this case, the vertical dimension was increased using a CAD program in a patient who needed vertical dimension recovery due to the use of old dentures, and the final denture was fabricated using a monolithic disc through the milling method. The centric relation was recorded using existing dentures, and using the information from the intraoral scan and the existing denture model scan, a trial denture was fabricated and delivered to the patient to evaluate the midline and occlusion. Based on the evaluation of the trial denture, the final denture was fabricated using a milling method and a monolithic disc, and the final denture showed satisfactory results functionally and aesthetically.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.43-44
• /
• 2015

LTE-Advanced system has been deployed with 2 and 4 transmission antennas (Tx) while the specification supports up to 8Tx. Due to deployment space, antenna dimension and complexity, the needs of deploying 8Tx system has not been motivated by operators. Recently, three dimensional (3D) beamforming with active antenna has attracted significant attention in the wireless industry. By incorporating 2D active array into LTE-A systems, the system offers freedom in controlling radiation on elevation and horizontal dimension. When the number of antennas increases in the form of 2D arrangement, spatial separation can be realized simultaneously in horizontal and elevation domain and vertical beam-steering can increase SINR of UEs in high floors. In this paper, we study the system operations and implementations for supporting 3D beamforming with 8Tx antennas. In our schemes, by reusing the conventional CSI feedback framework, the system can operate 2D active array without harming the backward compatibility. Evaluation results show that 3D beamforming provides capacity boosting over the conventional 2D beamforming systems while keeping same antenna structure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.29-38
• /
• 2009

Statement of problem: A casting connection technique is widely used for repair, correction and addition to base metal framework. However, a casting connection technique may increase the risk of failure in clinical situations when high stresses exist. Purpose: The purpose of this study was to investigate the mechanical retentive groove design comparatively to increase the joint strength by using the three-dimensional finite element analysis model of a 3-unit fixed partial denture. Material and methods: Ten finite element models were constructed. (Model A: One retentive groove, Model B: Two retentive grooves, Model C: Three retentive grooves, Model D: Four retentive grooves, Model E: One horizontal groove and two vertical grooves, Model F: Two horizontal grooves and one vertical groove, Model G: One groove with the enlarged dimension, Model H: Two grooves with the enlarged dimension, Model I: One groove with the increased height, Model J: One groove with the increased width of base). The vertical force was applied to the mesial and the distal fossa to the casting connection of mandibular first molar. Results: The main factors, affecting joint strength of casting connection were both the retention between the primary cast and the secondary cast and the thickness of the primary cast remaining after preparing retentive groove. The increase of retentive force, according to the numbers and the dimension of retentive groove had an effect on distributing stress. However, in some cases, the increase of retentive force resulted in the increase of stress by reducing thickness of the primary cast in the connection area. Conclusion: The design of retentive groove that limits number of retentive groove for metal thickness and increases the depth of retentive groove for retention is highly recommended.

• The korean journal of orthodontics
• /
• v.8 no.1
• /
• pp.49-58
• /
• 1978

This investigation was undertaken to know how the bony facial profile could be changed with age. The 5 serial lateral cephalometric roentgenograms of the fourteen boys and fourteen girls between 7 and 11 years of age were studied and the findings seems to warrant the following conclusions. 1. The manaible tended to become more prognathic in relation to the cranial base (S-N) during growth, but the maxilla showed very little change. 2. There was increase in the inclination of the lower border of mandible associated with the increase in mandibular prognathism. 3. There was a tendency to being straight in bony facial profile due to the decrease in angle ANB with age. 4. The chin portion had a tendency to forward and downward growth in relation to the cranial base but there was slight strong tendency in downward growth. 5. The vertical growth was more prominant in the maxilla than in the mandible. 6. There was uniform and gradual increase of all measurements during growth. 7. Dimension of the craniofacial complex was larger in the boys than in the girls but this difference was not statistically significant. 8. Individual variation in skeletal growth was a normal occurrence.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.148-154
• /
• 2006

The effect of small-scale near surface inhomogeneity on Rayleigh wave propagation and dispersion has been investigated in this study using two-dimensional FEM elastic modeling. Various inhomogeneity models with a variety of geometrical shape and embedment depth which exist in homogeneous half-space and two-layered media are considered. Results show that any near surface inhomogeneity greater than one wavelength in terms of minimum wavelength of Rayleigh wave shows dispersion characteristics. Such dispersion effect become stronger as the dimensions of the inhomogeneity increase. The effect of horizontal dimension is more dominant factor governing the dispersion characteristics than vertical dimension. However, the dispersion effect can not be identifiable in seismogram if the horizontal dimension is not wide enough. Nonetheless, even in this case, the existence of inhomogeneity can be inferred by the reflection or transmission event of Rayleigh wave. The results can be expected to provide insights on the behavior of Rayleigh wave which may be helpful for designating field work or new processing scheme to detect near surface inhomogeneity by surface wave method.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.291-297
• /
• 2018

Vertical farming systems offer many advantages in urban spaces. They have also been proposed as an engineering solution to increase the productivity per unit area of cultivated land by extending crop production in the vertical dimension. However, soil water retention is a major constraint affecting the plant environment. This study analyzed the effects of growth environment of Tropaeolum majus and Fragaria spp., on the vertical farming system, by using four different types of cover material types including sphagnum moss (Control), a shading net (S.N.), multi-layered fabric (M.L.F.), and non-woven fabric (N.W.F.). The volumetric soil moisture contents and plant characteristics were investigated from May to September 2014. Plant materials were individually cultivated in hanging baskets measuring $30{\times}17{\times}17cm$, filled with a mixture of soil and perlite, and placed at 1.5m height. Each treatment was performed in quadruplicate and consisted of five plants, amounting to a total of 20 plants. The analysis indicated that different covers were associated with multiple functions and soil water retention improvements may have a positive impact on the vertical farming system. The difference in soil water retention increased in the following order: M.L.F. > Control > N.W.F. > S.N.. Furthermore, the differences in plant height and survival rate increased in the following order: M.L.F. > Control > N.W.F. > S.N. Therefore, M.L.F yielded satisfactory good response for the vertical farming system of cover materials. Our results clearly demonstrate that vertical spaces represent an attractive alternative to urban farming and suggest that further increases in yield may be achieved via different cover materials in vertical farming using hanging baskets.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.599-604
• /
• 1994

Very few reports are available on the occurrence of abnormality of both enamel and dentin. This case has some characteristiced of both amelogenesis imperfecta and dentinogenesis imperfecta. Clinically, the enamel of primary dentition was completely absent and when the permanent teeth came to the pediatric dept. of Dankook University Dental Hopital for treatment. Fixed-removable type resin plate was delivered to increase vertical dimension and to solve esthetic and functional defects. Hypoplastic teeth were restored either stainless steel crown or composite resin restoration or both. The periodic recall check and oral hygiene education are recommended.

• Electrical & Electronic Materials
• /
• v.10 no.9
• /
• pp.922-929
• /
• 1997

As the size of semiconductor devices shrinks in the horizontal as well as vertical dimension it is difficult to estimate the transport-velocity of electron because they drift in non-equilibrium with a few scattering. In this paper HYbrid Monte Carlo simulator which employs the drift-diffusion model for hole-transport and Monte Carlo model for electron-transport in order to reduce the simulation time and increase the accuracy as well has been developed and applied to analyze the electron-transport in InAlAs/InGaAs HBT which is attractive for an ultra high speed active device in high speed optical fiber transmission systems in terms of the velocity and energy distribution as well as cutoff frequency.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.293-307
• /
• 2023

Jaw motion tracking, which is introduced in recent case reports, is a method which records the patient's individualized pathway of the mandibular movements along with facebow transfer, and reproduces the information in the virtual space of computer-aided-design/computer-aided-manufacturing (CAD-CAM) software. In this present case, a collapse of the occlusal plane was observed, due the loss of posterior teeth for a long period. Full-mouth rehabilitation with an increase in the occlusal vertical dimension was planned. First, the patient's mandibular movements were recorded on the newly established jaw relation by jaw tracking, and this information was assembled with the patient's intraoral data to create a virtual patient. Implant planning and diagnostic wax-up was done on the virtual patient, leading the fabrication of the provisional prosthesis. On the newly established jaw relation with an increase in the occlusal vertical dimension, canine guidance of the provisional prosthesis was checked. Finally, the provisional prosthesis was carried out to the definitive prosthesis. Using the advantages of the technologies in the digital dentistry, the patient was satisfied with the function and the esthetics after the treatment.