• 한국강구조학회 논문집
• /
• 제29권3호
• /
• pp.237-247
• /
• 2017

본 연구에서는 각형 강관 내부에 수직 다이아프램이 적용된 CFT 기둥 접합부의 구조적 특성에 대해 알아보았다. 각형 CFT 기둥의 거동을 파악하기 위해 실대형 3개 실험체를 제작하여 실험을 수행하였다. 유한요소해석을 통해 다이아프램의 거동을 확인하였으며 접합부 내력식을 제안하였다.

• 한국강구조학회 논문집
• /
• 제20권1호
• /
• pp.9-20
• /
• 2008

강박스거더교 다이아프램부에 있어서 경제적이고 합리적인 설계가 요망되어 진다. 본 연구에서는 시공중인 4경간 강박스거더교에서 콘크리트 상판 타설 시와 차량재하 시에 응력을 측정한다. 측정 결과는 지점부 다이아프램부와 중앙부에서 응력분배를 연구하기 위하여 분석된다. 다이아프램부 수직보강재의 높이별 응력과 이와 같은 높이의 다이아프램부 응력을 정리하고, 이들 결과를 분석하여 적정 수직보강재 길이의 효율성을 판단한다. 또한 다이아프램부 3조의 수직보강재 각각의 응력을 분석하고, 콘크리트 경화 후 차량 재하 시와 시에 따른 응력비를 산출하여 다이아프램부 설계합리화 연구의 기본 자료로 수립하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.839-844
• /
• 2000

The research was conducted to investigate the effects of intermediate diaphragm in concrete girder bridge. The analytical variables consisted of various types(reinforced concrete and steel) and locations of intermediate diaphragm, slab thickness, girder spacing etc. Finite element analyses of the bridge model assuming simply support condition. The Vertical load distribution was determined to be essentially independent of type and location of intermediate diaphragms. Also, it is found that the practical design of intermediate diaphragm may be revised.

• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.223-232
• /
• 2018

Two novel types of construction detailings, including using the distributive beam and the inner ring diaphragm in the joint between large-section CFT columns and outrigger truss to enhance the transferring efficiency of huge vertical load, and using the T-shaped stiffeners in the steel tube of large-section CFT columns to promote the local buckling capacity of steel tubes, were tested to investigate their working mechanism and design methods. Experimental results show that the co-working performance between steel tube and inner concrete could be significantly improved by setting the distributive beam and the inner ring diaphragm which can transfer the vertical load directly in the large-section CFT columns. Meanwhile, the T-shaped stiffeners are very helpful to improve the local bulking performance of steel tubes in the column components by the composite action of T-shaped stiffeners together with the core concrete under the range of flange of T-shaped stiffeners. These two approaches can result in a lower steel cost in comparison to normal steel reinforced concrete columns. Finally, a practical engineering case was introduced to illustrate the economy benefits achieved by using the two typical detailings.

• International Journal of Railway
• /
• 제6권3호
• /
• pp.107-111
• /
• 2013

In order to constrain the railway roadbed settlement which causes track irregularity, and thus threats running stability and ride quality, advanced Back-to-Back (BTB) reinforced retaining wall was numerically analyzed as railway roadbed structure. This study is intended to improve conventional Back-to-Back reinforced retaining wall as the technology which would reduce the roadbed settlement in a way of constraining the lateral displacement of its prestressed vertical facing and inducing arching effects in roadbed (backfill) placed between masonry diaphragm wall and vertical facing. As a result of numerical analysis, it was found that the roadbed settlement was reduced by 10% due to the prestressed vertical facing and embedded masonry diaphragm wall of the advanced Back-to-Back reinforced retaining wall system.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.195-208
• /
• 2023

The nodular diaphragm wall (NDW) is a novel type of foundation with favorable engineering characteristics, which has already been utilized in high-rise buildings and high-speed railways. Compared to traditional diaphragm walls, the NDW offers significantly improved vertical bearing capacity due to the presence of nodular parts while reducing construction time and excavation work. Despite its potential, research on the vertical bearing characteristics of NDW requires further study, and the investigation and visualization of its displacement pattern and failure mode are scant. Meanwhile, the measurement of the force component acting on the nodular parts remains challenging. In this paper, the vertical bearing characteristics of NDW are studied in detail through the indoor model test, and the displacement and failure mode of the foundation is analyzed using particle image velocimetry (PIV) technology. The principles and methods for monitoring the force acting on the nodular parts are described in detail. The research results show that the nodular part plays an essential role in the bearing capacity of the NDW, and its maximum load-bearing ratio can reach 30.92%. The existence of the bottom nodular part contributes more to the bearing capacity of the foundation compared to the middle nodular part, and the use of both middle and bottom nodular parts increases the bearing capacity of the foundation by about 9~12% compared to a single nodular part of the NDW. The increase in the number of nodular parts cannot produce a simple superposition effect on the resistance born by the nodular parts since the nodular parts have an insignificant influence on the exertion and distribution of the skin friction of NDW. The existence of the nodular part changes the displacement field of the soil around NDW and increases the displacement influence range of the foundation to a certain extent. For NDWs with three different nodal arrangements, the failure modes of the foundations appear to be local shear failures. Overall, this study provides valuable insights into the performance and behavior of NDWs, which will aid in their effective utilization and further research in the field.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.203-210
• /
• 1997

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.602-609
• /
• 2001

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zeroenergy mode of the element. The analysis includes an inflation analysis and a lateral analysis of an air spring for the deformed shape and the spring load with respect to the vertical and l ateral deflection. Numerical results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force with respect to the inflation pressure and the lateral deflection.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.163-171
• /
• 2003

Most of existing beam-to-column connections are reinforced symmetrically because of reverse action cause by earthquake but in the weak-earthquake region like Korea connections reinforced asymmetrically can be used. Specially, the connections between CFT(Concrete Filled Tube) column and H-shape beam can be applied by simplified lower diaphragm. The tensile capacity of Combined Cross Diaphragm for upper reinforcing was tested by simple tension test and four types for lower reinforcing; Combined Cross, None, Horizontal T-bar and Vertical Plate were tested by ANSI/AISC SSPEC 2002 loading program. Horizontal T-bar and stud bolts in vertical flat bar transmit tensile stress from bottom flange of beam to filled concrete. All test specimens were satisfied 0.01 radian of inelastic rotational requirement in ordinary moment frame of AISC seismic provision. As the results of parametric studies, simplified lower diaphragms demonstrated an outstanding strength, stiffness and plastic deformation capacity to use sufficient seismic performance in the field.

• 한국강구조학회 논문집
• /
• 제15권5호통권66호
• /
• pp.489-497
• /
• 2003

사회적 환경에 따른 교량의 장대화와 단순화의 추세로 인해 구조적 시스템과 생명주기에서 교량 건설의 경제적 효율성이 증대되고 있다. 강교 제작의 경제성과 효율성을 위해 시공 전 상세한 구조해석이 실시되어져야 하며 특히 강상자형교에서는 지점부 다이아프램과 수직보강재가 초점이 되는 주요 부재중의 하나이다. 본 논문에서는 강상자형교를 시공하거나 확장, 보수하는 과정에서 일어나는 추가 사하중에 대하여 지점부의 다이아프램 거동 분석을 위해 실측과 구조해석을 통시에 수행하여 다이아프램부 응력 분배 거동을 분석하고 다이아프램 수각보강 재의 적절한 길이를 제안하고자 하였다.