• 대한교통학회지
• /
• 제12권3호
• /
• pp.5-13
• /
• 1994

In the fields of rail and road design, most vertical alignment design have been thus far heavily dependent upon trial-and-errors of experienced engineers. However, it has long been inefficient in productivity of designing process. In order to overcome this inefficiency, this paper presents the optimal vertical alignment design method using mathematical optimization techniques. For optimization, mathematical model to minimize the construction cost is formulated and the separable programming technique and the Zoutendijk method are introduced to solve it. As result, it is shown that this optimization technique can give efficient solutions to all vertical alignment design fields with properly-estimated cost function.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.64-69
• /
• 2016

In this paper, structural analysis of High-Speed railway vertical tunnel structures was performed to verify the structural stability. The corrugated steel plate method was applied to the vertical tunnel structures for its simple construction method and low cost. The structural stability of Wall, Connection and Storage section was performed with LRFD and ASD design method at joint part, buckling, stress and plastic hinge. From the results, all of vertical tunnel structures shown the structural stability regardless of design method and structure types. So, the application of corrugated steel plate in vertical tunnel structures instead of cast-in-placed concrete was quite enough.

• 대한토목학회논문집
• /
• 제30권6C호
• /
• pp.241-253
• /
• 2010

본 연구에서는 응답변위법을 수직구 내진설계에 적용하고 구조물의 응답을 정확하게 구할 수 있는 방법을 제시하고자 기반면, 지반의 상대변위 산정 방법, 하중 산정 및 적용 방법에 따른 3차원 유한요소해석을 수행하였다. 그 결과, 수직구 내진설계를 위한 기반면은 전단파속도가 1500m/s를 초과하는 지반을 선정하는 것이 가장 적합하며, 지반변위 산정 방법은 다층지반의 특성을 반영할 수 있는 double cosine이 가장 적합하다. 또한 응답변위법 해석을 위한 동토압 및 주면전단력 산정 시 구조물의 단면형상효과를 고려하는 것이 실제 수직구의 동적거동을 적절히 반영하며 경제적인 설계를 할 수 있음을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1148-1154
• /
• 2006

Composite discharge capacity tests and smear effect tests are carried out to estimate the parameters for the reliability-based design of vertical drain method. Also the probabilistic and deterministic solutions of radial consolidation theory are presented. It compared to the result of reliability-based design and that of deterministic design using the tested and estimated parameters. The results indicated that the drain spacing is larger the deterministic method than the probabilistic method because the former is not considered the uncertainties in the properties of soil. The divergence of methods is dependent on the probability of achieving target degree of consolidation by a given time and the coefficient of variation(COV) of the coefficient of horizontal consolidation$(c_h)$.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.661-671
• /
• 1998

It is important to minimize the number of disk accesses which is necessary to transfer data in disk into main memory when processing transactions in physical database design. A vertical file partitioning method is used to reduce the number of disk accesses by partitioning relations vertically and accessing only necessay fragments. In this paper, SOFM(Self-Organizing Feature Maps) network is used to solve vertical partitioning problems. This paper shows that SOFM network is efficient in solving vertical partitioning problem by comparing approximate solution of SOFM network with optimal solution of N-ary branch and bound method. And this paper presents a heuristic algorithm for allocating duplicate attributes to vertically partitioned fragments. As branch and bound method requires particularly much computing time to solve large-sized problems, it is shown that SOFM network is able to overcome this limitation of branch and bound method and solve large-sized problems efficiently in a short time.

• 한국유체기계학회 논문집
• /
• 제16권4호
• /
• pp.22-27
• /
• 2013

The purpose of this paper is to perform the structural design of the small scale vertical-axis wind turbine (VAWT) blade using a response surface method(RSM). First, the four design factors that have a strong influence on the structural response of blade were selected. Analysis conditions were calculated by using the central composite design(CCD), which is a typical design of experiment for the response surface method(RSM). Also, the significance of the central composite design(CCD) was verified using analysis of variance(ANOVA). The finite element analysis was performed for the selected analytical conditions for the application of response surface method(RSM). Finally, a optimization problem was solved with a objective function of blade weight and a constraint of allowable stress to achieve a optimal structural design of blade.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.395-396
• /
• 2023

The current building structural standards present design requirements for the vertical construction joint of a slurry wall when it is used as a permanent wall. This paper proposes design methods and considerations according to the requirements of the relevant standards.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.29-36
• /
• 2021

The allowable strength based on experiments and the design allowable strength calculated using the design criteria were compared, which suggested a ratio between the allowable strengths for the reused vertical members of the system scaffolding and system support. By investigating a total of 421 certification reports for reused vertical members, the experimental allowable strengths were collected. Using design criteria such as the road bridge design and KDS 14 30 10, the design allowable strengths were calculated for various slenderness ratios. For the system scaffolding, the average ratio between the experimental and design allowable strengths was calculated to be 0.880 by assuming a normal distribution for all specimens. However, by analyzing the strength ratio according to the slenderness ratio, the lowest average strength ratio was found to be at least 0.844. Therefore, it is reasonable to assume that the allowable strength of the reused vertical members was 80-84% of the design allowable strength. In addition, assuming the allowable strength to be 85% of the design allowable strength is a possible method for reused vertical members of system supports.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.2033-2040
• /
• 2013

선형 설계 시 고려해야 할 수많은 정량적 또는 정성적인 인자들에 대하여 최신 IT기술을 접목하고 컴퓨터의 빠른 연산기능을 이용하여 단시간에 좀 더 많은 선형을 검토할 수 있는 선형 최적화 기술은 그동안 주목할 만 한 발전을 이루어 왔다. 특히 선형 최적화시 정량적인 설계요소의 정확한 반영과 수준 높은 성과품 출력에 대한 사용자의 요구는 설계기술자의 수준을 요구하는 단계에 이르렀다. 이런 요구사항에 부응하여 본 연구는 종단선형 최적화시 기존의 방식을 탈피한 보다 정밀한 Vertical Control Point(VCP) 적용구간을 탐색하고 설계에 적용할 수 있는 방안을 마련하였다. 이는 벡터방식을 이용한 VCP처리 기법으로 빠른 탐색 과 정확한 적용구간을 계산해 냄으로서 종전 래스터방식 결과와 비교해 보았을 때 보다 신뢰할 수 있는 종단선형을 도출할 수 있게 되었다. 특히 래스터 방식에 비해 벡터방식을 적용 할 경우 정밀도가 향상 되리라는 것은 주지의 사실이나, 선형최적화 기술의 선결조건인 처리속도를 저하시키지 않고 벡터방식을 적용 하였다는 것이 본 연구의 성과라고 할 수 있다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.171-176
• /
• 2001

Recent building structures are superior in its ability but they are light and flexible, and so have problems of vibration. In general, the problem of vertical vibration is not considered in structural design. However, in terms of serviceability for inhabitants in buildings, the estimation of vibration in design stage is important. Characteristics of vertical vibration is changed by modeling method of beam-column joint. To check the characteristics of vertical vibration, many tests and analyses were conducted on constructing building in Seoul. Results of tests and analyses were compared using transfer function. As a results, to check the vertical vibration, the cramp ratio of beam-column joint must be considered and reduced in structural design.