• Journal of Arbitration Studies
• /
• v.27 no.2
• /
• pp.59-81
• /
• 2017

The purpose of this study is to find a solution to disputes in the process of producing digital music sources. At present, the center of the world music market including the domestic market has been completely transformed from the tangible musical record market to the intangible sound source market. Due to these environmental changes, the music production process becomes industrialized and specialized, causing conflicts of interest among the individuals in the process. First of all, this study examined changes in the music market which is the background of the dispute, identified the problems of the process and suggested solutions while summarizing the meaning and role of each process of producing a sound source that may arise during the sound production process. This study covers plagiarism between producers, copyright infringement of the creator against assistant creator caused by the industrialization and division of the production environment, issues related to the rights of sound engineers whose role and importance become bigger as acoustic technology develops and music genres become more diverse, and vertical hierarchy due to the formation of oligopoly by several distributors with huge capital. As a result of the study, it was concluded that Alternative Dispute Resolution (ADR) system is suitable for solving these problems. Specific methods of using ADR include activation of the dispute settlement system of the Korea Copyright Commission, active use of the arbitration clause specified in the standard contract, and recalculation of labor costs and earnings from copyright through mutual negotiations. This paper can be differentiated from previous studies in that it studied overall problems that might arise in the process of digital music source production and suggested ADR utilization as the solution.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.2
• /
• pp.24-36
• /
• 2000

This study deals with the optimal method of orthophoto products using the non-photogrammetric scanners. we scanned positive film of aerial photographs at the different resolution and producted the orthophoto using the automatically generated DEM based on the Digital Photogrammetric Workstation, considering aerial image resolutions, DEM interval, resampling method and outpixel size. As a results, the acquired accuracy was worse in horizontal, but good in vertical. So It will be expected that orthophoto using non-photo grammetric scanner is good enough for the acquisition of GIS data and the calculation of soil volumes.

• Journal of Sensor Science and Technology
• /
• v.4 no.4
• /
• pp.62-69
• /
• 1995

We have developed the digital radiography system applied by the one dimensional multiwire proportional chamber. X-ray position signals were obtained from anode wires which were connected to counters through amplifiers and discriminators. The chamber was made of gas flow type and detector gas was P10. The threshold voltage which gives to the discriminator is independent on the neighboring channels. This improved the uniformity of the detector. Then the differential nonlineality is ${\pm}4%$. Increasing the gas pressure, the spatial resolution is about 1.4-mm at which the pitch of the anode wire is 2-mm. The object is scanned in vertical direction to take an image. The number of pixels in the image is $32{\times}32$.

• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.118-132
• /
• 1996

This paper proposes a wavelet transform- based image compression method using the energy distribution. The proposed method Involves two steps. First, we use a wavelet transform for the subband decomposition. The original image Is decomposed into one low resolution subimage and three high frequency subimages. Each high frequency subimages have horizontal, vertical, and diagonal directional edges. The wavelet transform is luther applied to these high frequency subimages. Resultant transformed subimages have different energy distributions corresponding to different orientation of the high pass filter. Second, for higer compression ratio and computational effciency, we discard some subimages with small energy. The remaining subimages are encoded using either DPCM or quantization followed by entropy coding. Experimental results show that the proposed coding scheme has better performance in the peak signal to noise ratio(PSNR) and higher compression ratio than conventional image coding method using the wavelet transform followed by the straightforward vector quantization.

• Journal of Korea Water Resources Association
• /
• v.33 no.2
• /
• pp.219-227
• /
• 2000

In Korea, heavy rainfall is mainly induced by the Changma front or frontal system passed over Korea periodically. Both its unknown mesoscale characteristics and the lack of direct measurements make it difficult to predict precipitation reasonably. To understand its 3-dimensional structure, initiation and development mechanism of precipitation in that system will be very helpful to forecast it more accurately. A meteorological radar is specially useful because it produces direct measurement with high resolution in time and space. In this study, representative frontal system is selected and analyzed specially focused on its vertical structure using radar data. Results shows that there are convective cells with horizontal scale of 10 - 20 km in precipitation system. Melting layer located between 3 and 5 km height, maximum fall speeds of rain drops were seen just below bright band.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.17.2-17.2
• /
• 2011

Double-walled carbon nanotubes (DWCNTs) were grown with vertical alignment on a Si wafer by using catalytic thermal chemical vapor deposition. This study investigated the effect of pre-annealing time of catalyst on the types of CNTs grown on the substrate. The catalyst layer is usually evolved into discretely distributed nanoparticles during the annealing and initial growth of CNTs. The 0.5-nm-thick Fe served as a catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. Both the catalyst and support layers were coated by using thermal evaporation. CNTs were synthesized for 10 min by flowing 60 sccm of Ar and 60 sccm of H2 as a carrier gas and 20 sccm of C2H2 as a feedstock at 95 torr and $750^{\circ}C$. In this study, the catalyst and support layers were subject to annealing for 0~420 sec. As-grown CNTs were characterized by using field emission scanning electron microscopy, high resolution transmission electron microscopy, Raman spectroscopy, and atomic force microscopy. The annealing for 90~300 sec caused the growth of DWCNTs as high as ~670 ${\mu}m$ for 10 min while below 90 sec and over 420 sec 300~830 ${\mu}m$-thick triple and multiwalled CNTs occurred, respectively. Several radial breathing mode (RBM) peaks in the Raman spectra were observed at the Raman shifts of 112~191 cm-1, implying the presence of DWCNTs, TWCNTs, MWCNTs with the tube diameters 3.4, 4.0, 6.5 nm, respectively. The maximum ratio of DWCNTs was observed to be ~85% at the annealing time of 180 sec. The Raman spectra of the as-grown DWCNTs showed low G/D peak intensity ratios, indicating their low defect concentrations. As increasing the annealing time, the catalyst layer seemed to be granulated, and then grown to particles with larger sizes but fewer numbers by Ostwald ripening.

• Journal of Environmental Science International
• /
• v.19 no.8
• /
• pp.983-999
• /
• 2010

Wind power energy is one of the favorable and fast growing renewable energies. It is most important for exact analysis of wind to evaluate and forecast the wind power energy. The purpose of this study is to improve the performance of numerical atmospheric model by data assimilation over a complex coastal area. The benefit of the profiler is its high temporal resolution and dense observation data at the lower troposphere. Three wind profiler sites used in this study are inhomogeneously situated near south-western coastal area of Korean Peninsula. The method of the data assimilation for using the profiler to the model simulation is the three-dimensional variational data assimilation (3DVAR). The experiment of two cases, with/without assimilation, were conducted for how to effect on model results with wind profiler data. It was found that the assimilated case shows the more reasonable results than the other case compared with vertical observation and surface Automatic Weather Station(AWS) data. Although the effect of sonde data was better than profiler at a higher altitude, the profiler data improves the model performance at lower atmosphere. Comparison with the results of 4 June and 5 June suggests that the efficiency with hourly assimilated profiler data is strongly influenced by synoptic conditions. The reduction rate of Normalized Mean Error(NME), mean bias normalized by averaged wind speed of observation, on 4 June was 28% which was larger than 13% of 5 June. In order to examine the difference in wind power energy, the wind power density(WPD) was calculated and compared.

• Journal of the Korean earth science society
• /
• v.24 no.6
• /
• pp.533-548
• /
• 2003

The prevailing wind phenomenon around Pohang in winter was investigated by using surface and vertical observatory datas and a numerical simulation was carried out to analyse this phenomenon using RAMS. Direction of the prevailing wind was westerly at upper atmosphere. However, near the surface, southwestern wind prevailed in winter. Using the RAMS to simulate a winter wind system numerically, it was found out that this phenomenon was strongly affected by the geographical features such as directions of coastline and low level valley, and distributions of land and sea. To investigate the accuracy of the model results, wind speed, temperature and wind direction of typical continuous southwestern wind occurring days were compared with observation data. Analyzing the characteristics of local circulation system was very hard because of horizontally sparse observation data. But from the result above, a numerical simulation using the RAMS, which satisfies the spatial high resolution, will provide more accurate results.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.16-23
• /
• 1996

Spatial distribution characteristics, volume backscattering strength and species composition of midwater trawling catch was analyzed biological and acoustical characteristics of anchovy shoal, using a high resolution echo - sounder at the south region of East sea of Korea. 1) In the survey site A of Lat.35$^{\circ}$55'N, Long.129$^{\circ}$45'E, the anchovy shoal of small to middle size with the horizontal range of 10~25m and large size with the horizontal range of 40~50m were distributed together. However in the survey site B of Lat.35$^{\circ}$38'N, Long.129$^{\circ}$40'E, the anchovy shoal was observed to be mainly small size which about 78% of the detected shoal. Another was that the anchovy shoal with the vertical range of 2~8m occupied about 68.6% in the survey site A and that of 6~12m occupied about 42.5% in the survey site B. The mainly the site A and B were found to be 10~50m super (2), 64.5% and 20~80m super (2), 66%, respectively. 2) The volume backscattering strength in the site A and B were observed to be -44.0~ -28.0dB, respectively. In the site A, the backscattering strength of -40.0~ -30.0dB was analyzed about 41.4%. 3) Most of total anchovy shoal was concentrated in the water layer of 50~100m in depth with 15.3~18.5$^{\circ}C$, 34.0~34.3$\textperthousand$ in the survey site A and 14.2~16.4$^{\circ}C$, 34.1~34.2$\textperthousand$ in the survey site B. 4) Mean total length(TL) and body weight(BW) of anchovy in the survey site A were 9.9cm and 4.4g respectively, with TL-BW relationship of BW=0.0007T$L^3.65$super (3.85). In site B, mean total length(TL) and body weight(BW) were 11.2cm and 8.7g, with TL-BW relationship of BW=0.0023T$L^3.36$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.993-1000
• /
• 2012

In this research, we proposed an efficient VLSI architecture of the lifting-based 2D DWT (Discrete Wavelet Transform) filter with 100% hardware utilization. The (9,7) filter structure has been applied and extendable to the filter length. We proposed a new block-based scheduling that computes the DWT for the lower levels on an "as-early-as-possible" basis, which means that the calculation for the lower level will start as soon as the data is ready. Since the proposed 2D DWT computes the outputs of all levels by one row-based scan, the intermediate results for other resolution levels should be kept in storage such as the Data Format Converter (DFC) and the Delay Control Unit (DCU) until they are used. When the size of input image is $N{\times}N$ and m is the filter length, the required storage for the proposed architecture is about 2mN. Since the proposed architecture processes the 2D DWT in horizontal and vertical directions at the same time with 4 input data, the total period for 2D DWT is $N^2(1-2^{-2J})/3$.