• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.972-975
• /
• 2003

We have performed computer simulation to obtain electro-optic characteristics of reflective hybrid aligned nematic liquid crystal displays driven by fringe field. The results show that the optimal retardation value of the cell is $0.289{\mu}m$, which allows for the cell to have a practical cell gap of larger than $3{\mu}m$ when manufacturing. A reflectance of the dark state is only 0.114% for an incident light 550nm. At this condition, the light efficiency of white state reaches 92.7%. Further, we have studied a new reflective display with polarizer, optical compensation with half plate, LC plus reflector. The display with optimized cell parameters shows low wavelength dispersion and the contrast ratio greater than 5 over exists about $120^{\circ}$ in vertical direction and $160^{\circ}$ in horizontal direction.

• 치과방사선
• /
• 제21권1호
• /
• pp.119-125
• /
• 1991

In the study of magnification of image in the focal trough of panoramic radiography, (Yoshida company Panoura - Eight - s), a series of 63 x-ray films were taken with the 8-19 metal pins placed in the holes of the plastic plate, measured and evaluated by 4 observes. The author analyzed the vertical and horizontal magnification rate in the corrected focal trough. Results were as follows: 1. For vertial measurements, magnification rates were minimum 10% maximum 36% and the magnification for image of medial side was larger than that of image of lateral side from image layer. 2. For horizontal measurements, magnification rates were minimum-14% maximum 46% and images of medial side from focal trough were magnified and images of lateral side from focal trough were retrenched. 3. When moved 10㎜ downward occlusal layer, interspace was somewhat narrow between the pins and upper sides of pins were horizontally magnified but images of the end parts of pins showed tapered form. 4. When moved 10㎜ downward from the occlusal layer, opposite images showed overlapping.

• 한국전산유체공학회지
• /
• 제12권2호
• /
• pp.37-45
• /
• 2007

The hybrid Cartesian/immersed boundary method is applied to simulate fluid-structure interaction of a two-dimensional orbiting flexible foil. The elastic deformation of the flexible foil is modelled based on the dynamic equation of a thin-plate. At each time step, the locations and velocities of the Lagrangian control points on the flexible foil are used to reconstruct the boundary conditions for the flow solver based on the hybrid staggered/non-staggered grid. To test the developed code, the flow fields around a flapping elliptical wing are calculated. The time history of the vertical force component and the evolution of the vorticity fields are compared with recent other computations and good agreement is achieved. For the orbiting flexible foil, the vorticity fields are compared with those of the case without the deformation. The combined effects of the angle of attack and the orbit on the deformation are investigated. The grid independency study is carried out for the computed time history of the deformation at the tip.

• The Journal of Korean Physical Therapy
• /
• 제26권2호
• /
• pp.117-122
• /
• 2014

Purpose: The purpose of this study was to compare the effects of force of ipsilateral versus contralateral cane usage on knee moments in healthy young adults. Methods: A convenience sample of 10 subjects volunteered for this study. Subjects walked over a force plate under three different conditions; unaided and ipsilateral cane and contralateral cane. Analysis of data on moment of the knee joint and ground reaction force was performed using the OrthoTrak program. Results: Flexion moment of the knee was decreased with the contralateral cane, but increased with the ipsilateral cane compared with normal gait. Extension moment of the knee was decreased with the contralateral cane compared with normal gait(p<0.05) and it was showed a greater decrease with the contralateral cane than with the ipsilateral cane gait(p=0.00). Valgus moment of the knee joint was increased with the ipsilateral cane but decreased with the contralateral cane. Vertical ground peak force was decreased with the ipsilateral cane compared with normal gait (p<0.05). Conclusion: The following conclusions were drawn from our data. Contralateral cane gait is more efficacious for persons with weakness of knee extensors, however, for a patient with varus deformity, the cane should be used in the ipsilateral hand.

• 대한구순구개열학회지
• /
• 제14권1_2호
• /
• pp.19-28
• /
• 2011

Maxillary anterior segmental distraction osteogenesis (DO) has been the alternative treatment option for patients with midfacial retrusion. The patient showed unilateral cleft lip and palate, and premaxillary distraction with rigid external device (RED) was planned to solve midface deficiency and to create alveolar space. Significant advancement of A point was observed, but relapse of A point was detected during consolidation period. The vertical position of the ANS was found to have moved downward. Axis of upper incisor decreased after DO. Maxillary anterior segmental DO is effective for treatment of patient with cleft lip and palate. The alveolar space is regained successfully, and the facial profile is improved without velopharyngeal problems.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.257-261
• /
• 2000

The value of I$_c$(critical current) in HTS (High Temperature Superconductor) tape has a great influence on B${\bot}$(vertical field). Therefore, in shape design of field coil for the HTSG(High Temperature Superconducting Generator), a method to reduce the B${\bot}$ should be considered in order to maintain the stability and substantial improvement on the performance. On the basis of the magnetic field analysis, this paper deals with various field coil shape according to the iron plate to obtain small B${\bot}$ by using Biot-Savart's law, image method and 2D FEA(2 Dimensional Finite Element Analysis) considering the stress condition of HTS. Moreover, the analysis is verified by comparison with experimental results. And also this paper presents the advanced model by using 3D FEA, in which flux density at armature is calculated in 5kVA class HTSG.

• Advances in materials Research
• /
• 제5권3호
• /
• pp.193-203
• /
• 2016

Compared to metal-to-metal tribology, polymer tribology presents further complexity as it is more prone to be influenced by operating conditions. Over the past two decades, progress in the field of wear of polymers has led to the establishment of more refined wear mechanisms. The current paper establishes the link between different load parameters and the wear rate of polymers, based on experimental investigations. A pin-on-plate reciprocating tribometer was used to examine the wear behaviour of polyamide sliding against a steel counterface, under constant and fluctuating loads, in dry conditions. In addition, the influence of controlled imperfections in the polymer surface upon its wear rate were examined, under cyclic and steady loading, in order to better understand surface fatigue wear of polymers. The imposed imperfections consisted of vertical artificial deep crack (slit) perpendicular or parallel to the direction of sliding. The study concludes with the followings findings; in general, wear of polymers shows a significant tendency to the type of applied load. Under cyclic loads, polymers show an increase in wear rate compared to those tested under static loads. Such increase was found to increase with the increase in cyclic load frequency. It is also demonstrated that surface cracks results in higher wear rates, particularly under cyclic loads.

• 한국재난정보학회 논문집
• /
• 제13권2호
• /
• pp.258-266
• /
• 2017

사장교는 특수목적으로 장 경간을 갖는 교량이다. 긴 경간으로 인하여 차량의 이동하중에 대한 동적응답이 매우 특별하다. 거동역시도 비선형을 갖고 있어 설계에 어려움이 많은 형식이다. 연구에서 다양한 차량하중을 고려하여 사장교의 응답을 구하고 장 경간 교량의 이동하중에 대한 거동을 파악한다. 특히, 한 방향과 양방향에 대한 하중이 속도를 가지고 이동할 때 교량의 부재에 대한 거동은 케이블의 유연성에 기인하는 것으로 나타났다. 차량하중의 영향은 케이블의 진동과 함께 수직변형을 증폭하는 경향을 나타내므로 케이블과 바닥판의 동적거동을 포함한 분석이 보다 효과적임을 알 수 있다.

• 한국어류학회지
• /
• 제9권1호
• /
• pp.130-140
• /
• 1997

한국산(韓國産) 납자루아과(亞科)에 속하는 각시붕어(Rhodues uyekii) 골격(骨格)의 주요 형태적 특징을 기재하고자 조사를 수행하였다. 본 조사에서 R. uyekii의 두골(頭骨), 척추골(脊椎骨), 지느러미 골격(骨格)을 조사였던 바, 두개부(頭蓋部)에 fontanell이 없으며, 상사골(上篩骨)의 전단에 돌기가 없고, 유리신경간극(遊離神經間棘)이 넓은 판상(板狀)이고, 상후두골(上後頭骨)은 높은 삼각형 형태의 돌기를 갖고 있으며, 제4 안하골(眼下骨)이 매우 축소 되어 있고, 미설골(尾舌骨)의 선단(先端)이 2분지(分枝)되고 수평판(水平板)과 수직판(垂直板)의 후방(後方)이 넓어지며 후연(後緣)이 돌출되는점, 견대부(肩帶部)에는 오훼골(烏喙骨) 구멍이 존재하지 않았고, 미기추전추체에 미신경골(尾神經骨)이 나타나지 않는 특징을 보였다.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.51-57
• /
• 1999

In this study, one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by stress analysis and bending fatigue test without edge preparation, with variation of joint shape. The purpose of this study is to give the welding condiltion and design standard on manufacturing one side fillet welded T-joint. As a result, the following conclusions were obtained. 1) In one side fillet welded T-joint, the larger the leg length and the penetration depth, the greater the bending fatigue strength because reduction of stress and strain on toe and root. The increase of the longitudinal leg length rather than vertical leg length contributed to the increase in bending fatigue strength. 2) In one side fillet welded T-joint without edge preparation, both general manual welding and general automatic welding were carried out with same condition. In this case, automatic welding showed deeper penetration and more increased longitudinal leg length than manual welding, so that automatic welding offers greater bending fatigue strength. 3) For one side fillet welded T-joint without edge preparation with automatic welding, the ratio(h/t) of the leg length(h) and the main plate thickness(t) in which toe crake can occur was 1.0 over.