• 대한토목학회논문집
• /
• 제44권5호
• /
• pp.733-741
• /
• 2024

Urban Air Mobility is gaining attention as a solution to traffic congestion and air pollution in large cities, but Gangneung, the case area of this study, is a medium-sized city focusing on tourism and connectivity with other public transport rather than congested traffic. Introducing UAM here focuses on integrating aircraft that carry people, vertiports for vertical take-off and landing, and corridors through which UAM can fly. While research on aircraft and vertiports is actively conducted, studies on corridors are still lacking. Thus, this study selected a route in Gangneung, a medium-sized city in Gangwon Special Self-Governing Province, that allows UAM flights with minimal risk. For this, a safety distance specific to building heights was determined, and the damage radius in case of aircraft crashes was calculated to select the route with the least possible damage during crash or collision incidents. For analysis, aerial photos and digital maps of Gangneung City, along with building information data, were used to create high-resolution orthophotos and digital elevation models. Based on the created data, GIS-based spatial analysis and three-dimensional visualization were conducted, and a suitable UAM route for Gangneung City was determined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1428-1430
• /
• 1995

In this study we fabricate Knife type Si-tip array using (110) Si wafer. We can fabricate vertical structure by anisotropic etching using EPW and observe it by SEM. After the step, we perform isotropic etching and oxidation sharpening of the structure and also observe it by SEM, respectively. The purpose of isotropic etching is to reduce the oxidation time. We attain a optimal tip whose radius is about $100{\AA}$ after anisotropic etching 2.25 min.+isotropic etching 5 min.+oxidation 1 hour and 23 min.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.80-92
• /
• 1994

The dynamic response characteristics of a floating ocean city are examined for presenting the basic data for the design of huge offshore structures supported by a large number of floating bodies in waves. The numerical approach which is accurate in linear system is based on combination of a three dimensional source distribution method, wave interaction theory and the finite element method of using the space frame element. The hydrodynamic interactions among the floating bodies are taken into account in their exact form within the context of linear potential theory in the motion and structural analysis. The method is applicable to an arbitrary number of three dimensional bodies having any individual body geometries and geometrical arrangement with the restriction that the circumscribed, bottom-mounted. Imaginary vertical cylinder for each body does not contain any part of the other body. The validity of this procedure was verified by comparing with experimental results obtained in the literature.

• 국제초고층학회논문집
• /
• 제3권1호
• /
• pp.35-48
• /
• 2014

In designing a 300 meter high skyscraper expected to be the tallest building in Japan, an earthquake-ridden country, we launched on the full-scale performance based design to ensure redundancy and establish new specifications using below new techniques. The following new techniques are applied because the existing techniques/materials are not enough to meet the established design criteria for the large-scale, irregularly-shaped building, and earth-conscious material saving and construction streamlining for reconstructing a station building are also required: ${\bullet}$ High strength materials: Concrete filled steel tube ("CFT") columns made of high-strength concrete and steels; ${\bullet}$ New joint system: Combination of outer diaphragm and aluminium spray jointing; ${\bullet}$ Various dampers including corrugated steel-plate walls, rotational friction dampers, oil dampers, and inverted-pendulum adaptive tuned mass damper (ATMD): Installed as appropriate; and ${\bullet}$ Foundation system: Piled raft foundation, soil cement earth-retaining wall construction, and beer bottle shaped high-strength CFT piles.

• Earthquakes and Structures
• /
• 제22권3호
• /
• pp.277-287
• /
• 2022

The ancient underground cities are a collection of self-supporting spaces that have been manually excavated in the soil or rock in the past. Because these structures have a very high cultural value due to their age, the study of their stability under the influence of natural hazards, such as earthquakes, is very important. In this research, while introducing the underground city of Ouyi Nushabad located in the center of Iran as one of the largest man-made underground cities of the old world, the analysis of dynamic stability is performed. For this purpose, the dynamic stress-displacement analysis has been performed through numerical modeling using the finite element software PLAXIS. At this stage, by simulating the Khorgo earthquake as one of the large-scale earthquakes that occurred in Iran, with a magnitude of 6.9 on the Richter scale, dynamic analysis by time history method has been performed on three selected sections of underground spaces. This study shows that the maximum amount of horizontal and vertical dynamic displacement is 12.9 cm and 17.7 cm, respectively, which was obtained in section 2. The comparison of the results shows that by increasing the cross-sectional area of the excavation, especially the distance between the roof and the floor, in addition to increasing the amount of horizontal and vertical dynamic displacement, the obtained maximum acceleration is intensified compared to the mapping acceleration applied to the model floor. Therefore, preventive actions should be taken to stabilize the excavations in order to prevent damage caused by a possible earthquake.

• Steel and Composite Structures
• /
• 제49권3호
• /
• pp.257-270
• /
• 2023

In this study, the feasibility and applicability of a friction damper with a vertical installation scheme are investigated. This device is composed of a steel section and two friction hinges at both ends which dissipate seismic energy. Due to its small width and vertical installation scheme, the proposed damper can minimize the interference with architectural functions. To evaluate the performance of the proposed damper, its mechanical behavior is theoretically evaluated and the required formulas for the yield strength and elastic stiffness are derived. The theoretical formulas are verified by establishing the analytical model of the damper in the SAP2000 software and comparing their results. To further investigate the performance of the developed damper, the provided analytical model is applied to a 4-story reinforced concrete (RC) structure and its performance is evaluated before and after retrofit under the Maximum Considered Earthquake (MCE) hazard level. The seismic performance is thoroughly evaluated in terms of maximum interstory drift ratio, displacement time history, residual displacement, and energy dissipation. The results show that the proposed damper can be efficiently used to protect the structure against seismic loads.

• 한국전산구조공학회논문집
• /
• 제30권6호
• /
• pp.541-547
• /
• 2017

기후변화에 따른 자연재해의 증가하고 있다. 이에 자연재해에 의한 토목구조물의 피해 및 붕괴를 예방하기 위하여 처짐 및 균열을 지속적인 관리가 필요하다. 이에 효과적인 구조물 관리를 위해 광학 이미지 기술이 유지관리 기술에 적용되고 있다. 하지만 광학이미지 기술은 촬영에 따른 주변 조건의 영향이 크며, 그 때문에 촬영조건에 대한 검증이 필요하다. 이를 위해 본 논문에서 촬영조건으로 자연광, 촬영매수, 촬영거리를 따른 수직변위 추정값의 정확도에 대해 검증하였다. 실험을 통해 확인한 결과 자연광이 수직변위를 추정하는데 자연광이 가장 큰 영향을 미치는 것을 확인할 수 있었고, 촬영거리 또한 수직변위를 검토하는데 주요한 영향을 미치는 것을 확인할 수 있었다. 본 결과를 통해서 외부환경에서 촬영하는데 활용하여 변위 추정 시 발생하는 오차를 최소화할 수 있으며, 이러한 과정을 통해 구조물 유지관리에 적용할 수 있다.

• 한국실내디자인학회논문집
• /
• 제24권4호
• /
• pp.43-50
• /
• 2015

In lighting design and lighting in the light of how the physical space rather than the amount of light metering is implemented in the same space as horizontal illuminance and luminance study of the spatial analysis as a basis for improving the quality of scientific and cognitive aspects analyzed the vertical component of the light. Vertical component of the light and the ability to interpret the information space can be secured more easily sense the brightness of a small area compared to the horizontal components of electrical energy, due to the contrast between the dark and the surrounding induce customers to public facilities or commercial space The pedestrian aids to facilitate the determination of the copper. In addition, to secure the brightness of the overall sense of space allows to have a sense of comfort to lower the tension of the space. The vertical component of light also has a deep relationship to improving the quality of light in electrical energy savings increase the accessibility of space, space, nightscape in the humanities also contribute to environmental and looking for one trillion people in the city in terms of cultural development and identity There.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제22권1호
• /
• pp.24-32
• /
• 1994

A special upper-air observation including airsonde and pibal observations was performed to investigate the characteristics features of the vertical distribution of the meteorological elements over Taegu on a selected clear day of each season from October 1991 to August 1992. The diurnal and seasonal variations of the vertical profiles of air temperature and mixing ratio were obtained from airsonde observations and wind speed and direction from pibal observations. The results of these special upper-air observations are as follow : The diurnal variation of the vertical distribution of air temperature reveals the characteristic features associated with the atmospheric boundary layer. All case days, except for the summer season, show upper-level inversion layer which influenced by surface high, and surface inversion layer produced by radiative cooling. The diurnal variation of mixing ratio shows the maximum vale at 1500 LST in both the upper and low levels, and is larger on the lower level than the upper level. The mixing ratio of the lower level is larger than that of the upper level. On the average the mixing ratio decrease with the height, and is the wettest on the summer case day and the driest on the winter case day. The diurnal variation of the wind velocity and direction are variable in the lower level with time and height, while they are steady in the upper level. On the average, the wind direction is southerly or southeasterly for the summer case day, westerly or northwesterly for the spring and fall case days, and northerly or northwesterly for the winter case day.

• 국제초고층학회논문집
• /
• 제7권2호
• /
• pp.111-125
• /
• 2018

By the year 2050, the world population is set to increase to 9 billion people, of which 66% will be living in cities. It is argued that this will inevitably lead to further urban densification and soaring, inhumane and dense vertical environments. However, innovative and disruptive technologies impacting all realms of life means that we will also live, work, play, learn and make in novel ways, the beginnings of which are already becoming evident. These present opportunities for reimagining city environments, and in particular tall buildings, with a focus on reducing redundancies and re-appropriating existing buildings, creating novel hybrid environments, incorporating green and social democratic spaces, and integrating multiple modes of transport. This paper examines how vertical cities may perhaps be dense, resource efficient, and yet humane, presenting three possible scenarios for Singapore's context, which are, however, common to many Asian high-density urban environments. The scenarios presented are the outcome of Final-Year Thesis Projects undertaken by final-year architecture students at the National University of Singapore (NUS) in 2017.