• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1145-1158
• /
• 1994

물의 유동(流動)에 관한 계산상 효율성(效率性)을 갖는 자유수면(自由水面)을 고려한 3차원(次元) 유한차분(有限差分) 수직모형(數値模型)을 개발하였다. 수직모형(數値模型)은 연직방향(鉛直方向)에 대해 정규화(正規化)한 좌표(座標)(${\sigma}$-coordinate)를 사용하며, 시간(時間) 적분방법(積分方法)으로는 반음해법(半陰解法)(semi-implicit)을 사용하여 계산시간(計算時間)의 효율성(效率性)을 도모하였다. 모드분리(mode-splitting)개념을 도입하여 내부모드(internal mode)에 대해서는 양해법(陽解法)을 사용하였으며, 외부모드(external mode)는 수평방향(水平方向) 운동량방정식(運動量方程式)들과 연속방정식(連續方程式)의 차분식(差分式)으로부터 구한 타원형(楕圓型) 차분방정식(差分方程式)을 SOR방법에 의하여 해석하였다. 이와 같은 방법은 계산(計算) 시간간격(詩間間隔)이 표면(表面) 중력파(重力波)에 대한 CFL(Courant-Fredrich-Lewy)조건에 의해 제약을 받지 않아 계산시간(計算時間)의 효율성을 도모할 수 있다. 개발된 모형은 1차원(次元) 수로(水路)에서 취송유(吹送流)의 연직분포(鉛直分布)에 대한 해석해(解析解)와 비교(比較) 및 연직(鉛直) 가변격자(可變格子)의 도입에 따른 오차분석(誤差分析) 정사각형(正四角形) 호수(湖水)에서 취송유(吹送流) 계산(計算) 및 차분화(差分化) 상수(常數)들의 민감도(敏感度) 분석(分析)을 수행하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.156-157
• /
• 2005

Gas hydrate is ice-like crystalline lattice, formed at appropriate temperature and pressure, in which gas molecules are trapped. It is worldwide popular interesting subject as a potential energy. In korea, a seismic survey for gas hydrate have performed over the East sea by the KIGAM since 1997. In this paper, we had conducted numerical and physical modeling experiments for seismic properties on gas hydrate with field data which had been acquired over the East sea in 1998. We used a finite difference seismic method with staggered grid for 2-D elastic wave equation to generate synthetic seismograms from multi-channel surface seismic survey, OBC(Ocean Bottom Cable) and VSP(Vertical Seismic Profiling). We developed the seismic physical modeling system which is simulated in the deep sea conditions and acquired the physical model data to the various source-receiver geometry. We carried out seismic complex analysis with the obtained data. In numerical and physical modeling data, we observed the phase reversal phenomenon of reflection wave at interface between the gas hydrate and free gas. In seismic physical modeling, seismic properties of the modeling material agree with the seismic velocity estimated from the travel time of reflection events. We could easily find out AVO(Amplitude Versus Offset) in the reflection strength profile through seismic complex analysis.

• 대기
• /
• 제23권4호
• /
• pp.453-470
• /
• 2013

As a part of the KIAPS Observation Processing System (KOPS), we have developed the modules of satellite radiance data pre-processing and quality control, which include observation operators to interpolate model state variables into radiances in observation space. AMSU-A (Advanced Microwave Sounding Unit-A) level-1d radiance data have been extracted using the BUFR (Binary Universal Form for the Representation of meteorological data) decoder and a first guess has been calculated with RTTOV (Radiative Transfer for TIROS Operational Vertical Sounder) version 10.2. For initial quality checks, the pixels contaminated by large amounts of cloud liquid water, heavy precipitation, and sea ice have been removed. Channels for assimilation, rejection, or monitoring have been respectively selected for different surface types since the errors from the skin temperature are caused by inaccurate surface emissivity. Correcting the bias caused by errors in the instruments and radiative transfer model is crucial in radiance data pre-processing. We have developed bias correction modules in two steps based on 30-day innovation statistics (observed radiance minus background; O-B). The scan bias correction has been calculated individually for each channel, satellite, and scan position. Then a multiple linear regression of the scan-bias-corrected innovations with several predictors has been employed to correct the airmass bias.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권2호
• /
• pp.156-164
• /
• 1986

In the case of boiling on high temperature wall, vapor film covers fully or parcially the surface. This phenomenon, film boiling or transition boiling, is very important in the surface heat treatment of metal, design of cryogenic heat exchanger and emergency cooling of nuclear reactor. Mainly supposed hydraulic-thermal accidents in nuclear reactor are LCCA (Loss of Coolant Accident) and PCM (Power-Cooling Mismatch). Recently, world-wide studies on reflooding of high temperature rod bundles after the occurrence of the above accidents focus attention on wall temperature history and required time in transient cooling process, wall superheat at rewet point, heat flux-wall superheat relationship beyond the transition boiling region, and two-phase flow state near the surface. It is considered that the further systematical study in this field will be in need in spite of the previous results in ref. (2), (3), (4). The paper is the study about the fast transient cooling process following the wall temperature excursion under the CHF (Critical Heat Flux) condition in a forced convective subcooled boiling system. The test section is a vertically arranged concentric annulus of 800 mm long and 10 mm hydraulic diameter. The inner tube, SUS 304 of 400 mm long, 8 mm I.D, and 7 mm O.D., is heated uniformly by the low voltage AC power. The wall temperature measurements were performed at the axial distance from the inlet of the heating tube, z=390 mm. 6 chromel- alumel thermocouples of 76 .mu.m were press fitted to the inner surface of the heating tube periphery. To investigate the heat transfer characteristics during the fast transient cooling process, the outer surface (fluid side) temperature and the surface heat flux are computed from the measured inner surface temperature history by means of a numerical method for inverse problems of transient heat conduction. Present cooling (boiling) curve is sufficiently compared with the previous results.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2004년도 정기총회 및 제6최 특별 심포지움
• /
• pp.118-137
• /
• 2004

근래에 금속성 혹은 비금속성 매장 유물이나 포탄 등의 수중 탐색 문제가 강바닥, 호수바닥, 해저 또는 갯벌 등의 얕은 수심 현장에서 자주 발생하고 있다. 본 발표에서는 이러한 목적에 사용되는 최근의 세계적 수중 탐지장비들의 적용성 및 한계를 살펴보고, 수중매장물 조사에 응용될 수 있는 전기 및 자기탐사 사례를 소개한다. 그러나 현재까지 직접적인 수중 매장물 탐사사례는 거의 없으므로 체계적인 보고보다는 앞으로의 다양한 현장 응용에 도움이 될 수중 전기 및 자기 탐사 방법에 대해 강바닥/호수바닥/해저시추공탐사/갯벌등의 관련 국내 현장사례에 대해 정리하여 현장문제 발생시 일조하고자 한다. 대부분의 지하 물리탐사 문제가 그렇듯이 대상체를 효율적으로 찾기 위해서는 직접적인 탐지뿐만이 아니라 조사구역내의 간접적인 지질정보를 최대한 탐사 활용하여야 적중률을 높일 수 있다. 그리고 여기서 소개되는 각종 수중 탐사사례들은 그 자체가 현장 수용에 부응하는 새로운 탐사시스템의 개발에 중요한 설계 지침이 될 수 있다. 한편 다양한 현장 수요에 맞추어 신속 정밀 다채널 배열 센서들에 의한 전자기 방식 실시간 물 바닥 스캐닝 탐지시스템의 설계제안도 제시해 본다.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.3-8
• /
• 2012

2차원 곱 부호는 저장장치 시스템에서 연집 오류를 정정하기 위해 연구되었다. RS-LDPC 곱 부호는 횡 방향의 RS 부호와 종 방향의 LDPC 부호로 이루어져 있다. 먼저 횡 방향의 RS 부호를 이용하여 연집 오류를 검출하며, 이 연집 오류의 위치 정보를 활용하여 종 방향의 LDPC 부호로 오류를 정정한다. 저장장치에서는 여러 가지 요인에 의해 연집 오류가 발생할 수 있다. 따라서 저장장치 시스템에서는 연집 오류에 강한 부호가 필요하다. RS-LDPC 곱 부호는 연집 오류에 강하다. 하지만 저장 밀도가 커지면서 연집 오류의 길이는 더 길어지게 된다. 따라서 본 논문에서는 긴 연집 오류에도 강한 특성을 보이는 LDPC-LDPC 곱 부호를 제안한다. 또한, RS-LDPC 곱 부호와 비교하여 LDPC-LDPC 곱 부호는 횡 방향으로 LDPC 부호를 사용하여 많은 램덤 오류가 발생 하였을 때 안정적인 성능 이득이 있다.

• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.97-106
• /
• 2018

Background: A cargo container scanner using a high-energy X-ray generates a fan beam X-ray to acquire a transmitted image. Because the generated X-rays by LINAC may affect the image quality and radiation protection of the system, it is necessary to acquire accurate information about the generated X-ray beam distribution. In this paper, a diode-based multi-channel spatial dose measuring device for measuring the X-ray dose distribution developed for measuring the high energy X-ray beam distribution of the container scanner is described. Materials and Methods: The developed high-energy X-ray spatial dose distribution measuring device can measure the spatial distribution of X-rays using 128 diode-based X-ray sensors. And precise measurement of the beam distribution is possible through automatic positioning in the vertical and horizontal directions. The response characteristics of the measurement system were evaluated by comparing the signal gain difference of each pixel, response linearity according to X-ray incident dose change, evaluation of resolution, and measurement of two-dimensional spatial beam distribution. Results and Discussion: As a result, it was found that the difference between the maximum value and the minimum value of the response signal according to the incident position showed a difference of about 10%, and the response signal was linearly increased. And it has been confirmed that high-resolution and two-dimensional measurements are possible. Conclusion: The developed X-ray spatial dose measuring device was evaluated as suitable for dose measurement of high energy X-ray through confirmation of linearity of response signal, spatial uniformity, high resolution measuring ability and ability to measure spatial dose. We will perform precise measurement of the X-ray beamline in the container scanning system using the X-ray spatial dose distribution measuring device developed through this research.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.843-848
• /
• 2015

The objective of this study is to observe and optimize a typical ocean environment and reduce wave reflections in the wave flume. In order to generate ocean waves in the wave flume, a combination of a horizontal piston type wave generator and wave absorbers was installed in the channel. Two probes for measuring the wave heights, i.e., wave level gauges, were used to record the continuous variation of the wave surface, the phase difference, and the maximum (crest) and minimum (trough) points of the propagating waves. In order to optimize the shape and size of the propagating waves, several absorption methods were proposed. Apart from an active wave absorption method, we used methods that involved vertical porous plates, horizontal punching plates, and sloping-wall-type wave absorbers. To obtain the best propagating waves, a sloping-wall-type wave absorber was chosen and tested in terms of the constitutive filling materials and the location and shape of the plate. This study also focused on the theoretical prediction of the wave surface, separating them into the incident and reflective components. From the results, it is evident that the wave absorber comprising a hard filling material exhibits a better performance than the absorber comprising a soft material, i.e., the wave absorber can be a strong sink to control the energy of the incoming wave. In addition, larger wave absorbers correspond to lower reflectance because a larger volume can reduce the incoming wave energy. Therefore, at constant absorber conditions, the reflectance of the wave increases as the wave period increases. Finally, the reflectance of the wave was controlled to be less than 0.1 in this study so that the wave flume can be used to simulate an offshore environment.

• 한국수자원학회논문집
• /
• 제44권3호
• /
• pp.189-198
• /
• 2011

본 연구는 난류현상의 모형화를 위해 널리 이용되는 k-$\varepsilon$과 k-$\omega$ 난류모형을 비교하는 것이 목적으로, 횡방향 흐름이 무시될 수 있는 U-튜브 모양의 터널형 수로 내 높은 레이놀즈수를 가진 진동 경계층 흐름에 두 난류해석방법을 적용하였다. 난류모형의 적용은 1차원 연직 모형을 통해 이루어지며, 수치 모의 결과, 유속의 분포와 난류운동에너지 (turbulent kinetic energy) 모두에서 두 모형이 매우 유사한 결과를 나타낸다. 이를 통하여, 횡방향 압력경사가 무시될 수 있는 조건에서는 k-$\varepsilon$과 k-$\omega$ 난류모형이 큰 차이를 보이지 않고, 우수한 결과를 나타냄을 알 수 있다. 따라서 직선형 하천 및 하구부, 해안에서의 파랑 흐름 등과 같이 횡방향의 압력경사가 미미한 지역에서의 난류를 수치적으로 해석할 경우, 기존의 풍부한 연구를 통해 매개변수의 검보증이 장기간 이루어진 k-$\varepsilon$ 모형을 이용하는 것이 추천된다.

• 환경영향평가
• /
• 제20권4호
• /
• pp.539-555
• /
• 2011

Newly constructed, high-rise dense building areas by urban development can cause changes in local wind fields. Wind fields were analyzed to assess the impact on the local meteorology due to the land use changes during the urban redevelopment called "Eunpyeong new town" in north-western Seoul using CFD_NIMR_SNU (Computational Fluid Dynamics, National Institute of Meteorological Research, Seoul National University) model. Initial value of wind speed and direction use analysis value of AWS (Automatic Weather Station) data during 5 years. In the case of the pre-construction with low rise built-up area, it was simulated that the spatial distribution of horizontal wind fields depends on the topography and wind direction of initial inflow. But, in the case of the post-construction with high rise built-up area, it was analyzed that the wind field was affected by high rise buildings as well as terrain. High-rise buildings can generate new circulations among buildings. In addition, small size vortexes were newly generated by terrain and high rise buildings after the construction. As high-rise buildings act as a barrier, we found that the horizontal wind flow was separated and wind speed was reduced behind the buildings. CFD_NIMR_SNU was able to analyze the impact of high-rise buildings during the urban development. With the support of high power computing, it will be more common to utilize sophisticated numerical analysis models such as CFD_NIMR_SNU in evaluating the impact of urban development on wind flow or channel.