• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 춘계학술대회 논문집
• /
• pp.76-79
• /
• 2002

고스트제거기는 수직공백구간 내에 삽입된 고스트제거기준신호 라인을 포획하여 송출된신호가 채널을 경유하면서 겪은 왜곡을 정확히 추정 하여야한다. 그런데 고스트가 심해지면 동기분리가 제대로 되지 않기 때문에 채널추정을 위한 데이터를 포획할 수 없게 된다. 본 논문에서는 이와 같은 문제점을 해결하고자 고스트제거기준신호의 상관특성을 활용해 프리 런(free run)하는 클록신호로 효과적으로 데이터를 획득하는 방법을 제안하고 컴퓨터 시뮬레이션을 동하여 검증하고자 한다. 고스트제거기준신호는 컬러 버스트를 제거하고 신호대잡음비를 개선하고자 4 필드에 걸쳐 그 각성이 반전되기 때문에 데이터 획득과정에서 수반되는 타이밍 지터 문제를 해결하는 방안도 제안한다. 시뮬레이션 결과 타이밍 지터 문제를 샘플간격의 약 4% 이하가지 고스트제거기준신호를 제대로 포획할 수 있음을 알 수 있었다.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.31-37
• /
• 1982

Developing a minimum wave resistance hull form which is satisfying the given requirements such as displacement and speed is one of the important problems in ship hydrodynamics. The theoretical approach conducted by Pien was successful in developing an optimized hull form, however, which can not be applied directly to practical hull form without manual lines fairing process. To avoid this difficulty, source distribution which arrived after the optimization was put into a fictitious restricted channel and as a result practicably modified hull form was derived by stream line tracing. The wave resistance of the hull thus obtained was calculated by solving the simplified integral equation suggested by Kan. The resistance at design point is almost same with that of the original hull which was represented by source distribution on the vertical rectangular center plane. It is therefore recommended to use the derived hull form for the hull which obtained after manual lines fairing process at Pienoid method. Further researches both in theory and experiment are necessary before this concept is put into practical application.

• 한국통신학회논문지
• /
• 제33권1C호
• /
• pp.68-78
• /
• 2008

The transmission of multimedia information over error-prone channels such as wireless networks has become an important area of research. In this paper, we propose two Error Concealment(EC) schemes for wireless transmission of JPEG2000 image. The Multiple Representation(MR) is employed as the preprocessing in our schemes, whereas the main error concealing operation is applied in wavelet domain at receiver side. The compressed code-stream of several subsampled versions of original image is transmitted over a single channel with random bit errors. In the decoder side, the correctly reconstructed wavelet coefficients are utilized to recover the corrupted coefficients in other sub-images. The recovery is carried out by proposed basic(MREC-BS) or enhanced(MREC-ES) methods, both of which can be simply implemented. Moreover, there is no iterative processing during error concealing, which results a big time saving. Also, the simulation results confirm the effectiveness and efficiency of our proposed schemes.

• 한국해양공학회지
• /
• 제18권4호
• /
• pp.1-7
• /
• 2004

A simultaneous measurement system that can analyze the flow-structure interaction has been developed. This system consists of four CCD cameras, two for capturing instantaneous flow fields and two for tracking a solid body. The three-dimensional vector fields around a cylinder are measured, while the motion of the cylinder forced by the flow field is measured, simultaneously, with the constructed system. The cylinder is suspended in the working fluid of a water channel, and the surface of the working fluid is forced sinusoidally to make the cylinder bounced. Reynolds number for the mean main stream is about 3500. The interaction between the flow fields and the cylinder motion is examined quantitatively.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.700-700
• /
• 2012

산지유역은 하천을 따라서 도로가 발달되어 있어서 대부분의 도로가 홍수시 하천의 영향을 많이 받는다. 산지하천은 경사가 급하고 만곡수충부가 많이 발달되어 있기 때문에 홍수시 유속이 빠르고 만곡수충부의 편수위가 매우 크다. 이는 만곡부 호안 파괴와 도로 유실의 피해를 일으키는 경우가 많다. 따라서 대부분의 산지하천 만곡수충부에는 홍수피해 방지를 위해 콘크리트 옹벽호안으로 되어 있다. 그러나 콘크리트 옹벽은 조도가 작기 때문에 유속이 더 빠르게 되고 편수위를 한층 증대시킬 수 있다. 산지하천 만곡수충부의 편수위를 줄이기 위해서는 접근유속을 줄여야 하나 산지하천 특성으로 볼 때 접근유속 저감을 위한 공학적 방법은 제한적이다. 따라서 만곡수충부의 유속을 줄이는 방법으로 콘크리트 옹벽호안의 조도계수를 증대시키는 것이 효과적일 수 있다. 본 연구에서는 개수로 측벽에 수직돌출줄눈이 설치되었을 때 흐름에 미치는 수리효과를 개수로 수리실험으로 파악하고자 한 것이다. 실험결과 돌출줄눈의 간격이 수직돌출줄눈의 무차원 폭이 9일 때 평균유속이 가장 작게 나타났다. 이는 돌출줄눈의 간격이 개수로 내부흐름의 유속분포, 최대유속발생 위치, 유수단 면적의 크기에 영향이 미치기 때문이다. 따라서 개수로 측벽 수직돌출줄눈의 간격을 조절함으로써 개수로 유수저항의 크기를 조절할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제17권10호
• /
• pp.919-924
• /
• 1996

Crystal structure of two inclusion compounds Cd(pn)Ni(CN)4·0.25G (G=toluene and p-xylene, pn=1,2-diaminopropane) have been determined from single-crystal X-ray diffraction data; toluene clathrate: monoclinic P21/n, a=13.838(6), b=26.893(5), c= 7.543(5) Å, γ=90.92(3)°, Z=4, R=0.0616; p-xylene clathrate: monoclinic P21/n, a=13.895(2), b=26.900(3), c=7.613(1) Å, γ=91.06(1)°, Z=4, R=0.0486. The host structures determined for toluene- and pxylene-guest clathrates are substantially identical to the U-type structures observed for the straight chain aliphatic-guest clathrates. However, the alternating arrangement of occupied channels with the guest molecules and vacant channels appears in the host structure. The non-centrosymmetric toluene molecules are distributed about the inversion center to give an image like p-xylene molecule. The guests, toluene and p-xylene, prefer the U-type channel, favoring the interaction between the π-electrons of the aromatic ring and the pn-amino groups to hold the aromatic ring vertical to the cyanometallate meshes.

• Nuclear Engineering and Technology
• /
• 제36권5호
• /
• pp.403-414
• /
• 2004

An experimental study of heat transfer characteristics near the critical pressure has been performed with an internally-heated vertical annular channel cooled by R-134a fluid. Two series of tests have been completed: (a) steady-state critical heat flux (CHF) tests, and (b) heat transfer tests for pressure reduction transients through the critical pressure. In the present experimental range, the steady-state CHF decreases with increase of the system pressure for fixed inlet mass flux and subcooling. The CHF falls sharply at about 3.8 MPa and shows a trend towards converging to zero as the pressure approaches the critical point of 4.059 MPa. The CHF phenomenon near the critical pressure does not lead to an abrupt temperature rise of the heated wall, because the CHF occurs at remarkably low power levels. In the pressure reduction transients, as soon as the pressure passes below the critical pressure from the supercritical pressure, the wall temperatures rise rapidly up to very high values due to the departure from nucleate boiling. The wall temperature reaches a maximum at the saturation point of the outlet temperature, and then tends to decrease gradually.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.349-358
• /
• 2007

A single-beam gamma densitometer is utilized to measure the average void fraction in a small diameter stainless steel pipe under critical flow conditions. A typical design of a single-beam gamma densitometer is composed of a sealed gammaray source, a collimator, a scintillation detector, and a data acquisition system that includes an amplifier and a single channel analyzer. It is operated in the count mode and can be calibrated with a test pipe and various types of phantoms made of polyethylene. A good average void fraction is obtained for a small diameter pipe with various flow regimes of the core, annular, stratified, and bubbly flows. Several factors influencing the performance of the gamma densitometer are examined, including the distance between the source and the detector, the measuring time, and the ambient temperature. The void fraction is measured during an adiabatic downward two-phase critical flow in a vertical pipe. The test pipe has an inner diameter of 10.9 mm and a thickness of 3.2 mm. The average void fraction was reasonably measured for a two-phase critical flow in the presence of nitrogen gas.

• Computers and Concrete
• /
• 제23권2호
• /
• pp.97-106
• /
• 2019

This paper describes the design of a new interlocking masonry system, the production of designed interlocking units and mechanical properties of interlocked masonry assemblages with mortar. In this proposed system, units have horizontal and vertical locks to integrate the units to the wall and have a channel to enable the use of horizontal reinforcements in the wall. Using these units, unfilled, filled or reinforced walls can be constructed with or without mortar. In the production of the interlocking units, it was decided to use foamed concrete. 12 trial productions have been carried out at different mix proportions to obtain the optimum concrete mix. At the end of the mentioned productions, the units were produced with foam concrete which is selected as the most suitable in terms of compressive strength and specific gravity. Then, axial compression, diagonal tension and bed joint shear tests were carried out to determine the mechanical properties of the interlocked masonry assemblages with mortar. Results from the tests showed that interlocks designed to strengthen the system against shear stresses by creating discontinuity throughout the joints have been successful to achieve their aim. Obtained data will enable structural analysis of walls to be constructed with these new units.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2524-2533
• /
• 2024

When analyzing containment thermal-hydraulics, computational fluid dynamics (CFD) is a powerful tool because multi-dimensional and local analysis is required for some accident scenarios. According to the previous study, neglecting steam bulk condensation in the CFD analysis leads to a significant error in boundary layer profiles. Validating the condensation model requires the experimental data near the condensing surface, however, available boundary layer data is quite limited. It is also important to confirm whether the heat and mass transfer analogy (HMTA) is still valid in the presence of bulk condensation. In this study, the boundary layer measurements on the vertical condensing surface in the presence of air were performed with the rectangular channel facility WINCS, which was designed to measure the velocity, temperature, and concentration boundary layers. We set the laminar flow condition and varied the Richardson number (1.0-23) and the steam volume fraction (0.35-0.57). The experimental results were used to validate CFD analysis and HMTA models. For the former, we implemented a bulk condensation model assuming local thermal equilibrium into the CFD code and confirmed its validity. For the latter, we validated the HMTA-based correlations, confirming that the mixed convection correlation reasonably predicted the sum of wall and bulk condensation rates.