• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.17-23
• /
• 2011

To estimate fuel consumption of a vehicle, a car can be tested on chassis dynamometer. In this case, test causes a lot of time and money. To predict the fuel efficiency of vehicles in the design stage or early stage of development, the development of computer simulation model is necessary. Using simulation to predict the fuel consumption, the driving model which consists of time-velocity profile and time-grade profile is necessary In this study, vehicle model is developed in MatLab/simulink to estimate real driving fuel consumption rate with time-velocity profile, time-shift gear profile and time-grade profile. Vehicle model consists of driver model, engine model, power train model, and so on. On-road vehicle tests to verify the vehicle model are carried out for analyzing the result of simulation and comparing with those of the experiments.

• Advances in materials Research
• /
• 제6권1호
• /
• pp.65-78
• /
• 2017

A hat section was designed and developed for maximum impact energy absorption and/or transmission under low velocity impact. Towards this, different hat sections, having material properties of thermoplastic, were modeled and investigated numerically using finite element analysis (FEA) in the range of 20-50 J impact energy. In the study it was experienced that the design configuration of hat section with curvilinear profile (HSCP) was excellent in energy attenuation capacity and for even distribution of maximum impact force around and along the hat section under low velocity impact loading. To validate the numerical findings, polypropylene copolymer (Co-PP) HSCP and low density polyethylene (LDPE) HSCP were developed and evaluated experimentally in the said impact energy range. A correlation was established between FEA and experimental test results, thereby, validating a numerical model to predict results for other thermoplastic materials under given range of impact energy. The LDPE HSCP exhibited better performance as compared to Co-PP HSCP in the said range of impact energy. The findings of this study will enable the engineers and technologists to design and develop low velocity impact resistance devices for various applications including devices to protect bone joints.

• 천문학회보
• /
• 제46권1호
• /
• pp.32.3-33
• /
• 2021

We present H I gas kinematics and star formation activities of NGC 6822, a dwarf galaxy located in the Local Volume at a distance of ~ 490 kpc. We perform profile decomposition of the line-of-sight velocity profiles of the high-resolution (42.4" × 12" spatial; 1.6 km/s spectral) H I data cube taken with the Australia Telescope Compact Array (ATCA). For this, we use a new tool, the so-called BAYGAUD (BAYesian GAUssian Decompositor) which is based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, allowing us to decompose a line-of-sight velocity profile into an optimal number of Gaussian components in a quantitative manner. We classify the decomposed H I gas components of NGC 6822 into bulk-narrow, bulk-broad, and non_bulk with respect to their velocity and velocity dispersion. We correlate their gas surface densities with the surface star formation rates derived using both GALEX far-ultraviolet and WISE 22 micron data to examine the impact of gas turbulence caused by stellar feedback on the Kennicutt-Schmidt (K-S) law. The bulk-narrow component that resides within r25 is likely to follow the linear extension of the Kennicutt-Schmidt (K-S) law for molecular hydrogen (H2) at the low gas surface density regime where H I is not saturated.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.344-351
• /
• 2016

열차 운영사의 관점에서, 열차 운행에 관한 주요 관심사는 정해진 운행시간의 준수뿐만 아니라, 그와 동시에 열차 운행을 위해 소비되는 에너지 량을 최소화하는 것이다. 일반적인 수동 운전시, 기관사는 운행 노선의 특성에 따라 미리 규정된 최대 속도 프로파일을 기준으로, 노치를 제어함에 따라 규정 속도를 넘지 않도록 열차의 가감속을 조절한다. 이때 규정 속도를 준수하면서 동시에, 전체 운행 중에 소요되는 에너지 량의 절감을 위해, 기관사가 적절한 노치를 선택할 수 있는 구간별 노치 지정 가이드가 있어야 하며, 이는 운행구간에서의 노치 단계 최적화라는 절차를 통해 가능하다. 본 논문에서는 일반적인 운행 환경뿐만 아니라, 열차가 운행 중에 일시적으로 잔여구간의 트랙 정보 또는 규정속도 정보가 변경되는 이벤트 발생시에도 변화된 정보들을 기반으로 실시간으로 잔역구간의 노치 단계를 최적화 할 수 있는 유전 알고리즘을 활용한 실시간 노치 최적화 방안을 제안하였다. 또한 유전 알고리즘을 통해 얻어진 최적해를 적용할 때 에너지 절감 효과와 최적해 수렴특성에 관하여 분석하였다.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.477-483
• /
• 2016

본 연구는 Particle Image Velocimetry(PIV) 기법을 이용하여 마하수 2.96의 평판에 대해 층류, 천이, 난류 경계층의 속도 분포를 측정하였다. Schlieren 가시화 기법과 PIV 기법을 이용하여 앞전에서 발생한 경사 충격파가 평판 위의 유동장에 영향을 주는지 확인하였다. 층류 경계층의 경우, 실험에서 측정한 속도 분포가 압축성 Blasius 속도 분포를 만족하였다. 천이 경계층의 속도 분포는 벽면 부근부터 이론적인 난류 속도 분포로 변했으며, Re = $1.41{\times}10^6$에서 천이가 시작되었다. 난류 경계층 영역에서는 압축성 효과를 고려한 Van Driest 변환 속도가 비압축성 로그 법칙을 만족하였다. 또한 로그 구간이 끝나는 위치($y/{\delta}{\approx}0.28$)가 비압축성 난류 경계층($y/{\delta}{\approx}0.2$)에 비해 벽면에서 더 멀어진 것을 확인하였다.

• 한국수자원학회논문집
• /
• 제52권1호
• /
• pp.83-96
• /
• 2019

하천수사용 관리를 적정하게 관리하기 위해서는 객관적인 하천수사용량 자료가 수집되어야 한다. 그러나, 하천수 사용자의 취수여건을 고려하여 유량계 외에 수문조작 등의 간접적인 계측방법을 인정하고 있고, 사용자의 자발적인 보고에 의존함에 따라 자료의 객관화가 어려운 실정이다. 이에 한강홍수통제소에서는 농업용수 사용 비중이 커 하천유량 파악이 어려운 만경강의 고산~봉동 수위관측소 구간에 위치한 어우보 취수로에 V-ADCP를 이용한 계측시설을 설치 및 운영하고 있다. 본 연구에서는 V-ADCP로 측정된 유속을 이용하여 실시간 하천수사용량 산정을 위한 유속분포법의 적용성을 평가하였다. 이를 위해 Chiu의 2차원 유속분포식의 매개변수 민감도를 분석하고, 실측유량 자료에 기초한 최적 매개변수를 산정하였다. 또한 수위-유량관계법, 지표유속법과 비교 평가하여 유속분포법의 특성을 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.47-48
• /
• 2007

A CMP Process has many factors that affect result of a polished wafer. Dominant factors are velocity, pressure and temperature in process. A pad profile is also considered as affecting factor of CMP. Accoding to variation of a pad profile, the each pan of a wafer is differently pressured. It appears to affect the uniformity of a wafer. A pad profile varies as a swing arm conditioner which have been ordinarily used in industry. A swing arm conditioner has several sectors in its swing path. This study aims that a wafer get a good uniformity as swing arm conditioner's path on pad is analyzed and simulated. Through the simulation, tendency of pad profile after conditioning will be predicted and the result of simulation compared with the result of experiment. The optimized pad profile would be made by to vary swing arm's velocity on each sector. In order to maintain the optimized profile, conditioner design or swing arm's velocity should be changed and designed.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.165-172
• /
• 1995

Many algorithms to enhance a speed performance of a robot have been studied, but it's rare to consider disign aspect of a robot arm for time optimal problem. In this paper, section demensions of a robot arm and a velocity profile of an end-effector were optimally designed to minimize the cycle time. Capacity of actuators, deflections of end-effector, and a fundamental natural frequency of the robot arm were constrained in optimal design. For a given path with a trapezoidal velocity profile, torques of each joint were calculated using the inverse kinematics and dynamics. For the SCARA type robot which is mainly used for assembly tasks, the time optimal design of each robot arm id presented with the above constraints.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.596-600
• /
• 2011

In this numerical analysis, the distortion of flow measurement by inlet velocity profile of orifice flowmeter was investigated. To validate the numerical method, the convergence was monitored and the grid dependency was also checked. realizable k-e model was selected and y+ was about 50 in this calculation. the results shows that the pressure at the pressure tab near pipe wall was changed by inclined inlet velocity profile and it leads to distorted a measurement values of flow through the orifice plate from -3.8% to 9%. Therefore, the fully developed inlet flow was required for accurate flow measurement by orifice flowmeter. If not, the orifice plate installed at wrong location should be re-installed or additional actions should be taken.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.237-240
• /
• 2007

The evaluation of shear modulus (or shear wave velocity) profile of site is very important in the various fields of geotechnical engineering. To obtain shear wave velocity profile, various in-situ seismic methods using surface waves have been developed. These surface wave based in-situ seismic methods have their own strength and weakness. In this study, new seismic site characterization method using the harmonic wavelet analysis of wave (HWAW) was proposed to overcome some of weaknesses in the existing surface wave based seismic site characterization methods. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. In order to estimate the applicability of HWAW method, field tests were performed. Through field applications and comparison with other test results, the applicability of the proposed method were verified.