• 한국의류학회지
• /
• 제30권12호
• /
• pp.1697-1707
• /
• 2006

최근 정보기술 분야에서 새로이 부상하고 있는 RFID는 기존의 노동비용을 절감하고 재고관리를 개선하며, 또한 효율적인 사업모델 창출을 통해 판매를 증가시킬 수 있는 혁신적인 정보기술로 소개되고 있다. 따라서, 이 새로운 정보기술의 채택이 의류소매업에 가져올 수 있는 이점은 무엇이며, 또한 무엇이 RFID 기술을 실용화하는 데에 성공적 요인이 될 것인지를 생각해 볼 시점이다. 본 연구는 RFID기술에 대한 의류소매업자의 현실적 인식수준과 그들이 예측하는 RFID잠재적 이점을 탐색하고자 하였다 또한 이를 통해 의류소매업에서 RFID 실행가능성을 예측해 보고자 하였다. RFID 기술에 대한 경험적 연구가 매우 드문 시점에서, 본 연구는 미국 내 소매업자들을 대상으로 집중집단면접(Focus group interview)를 실시하였다. 질적 내용 분석 결과, 총 150개의 RFID관련 문항이 도출되었고, 이는 다시 다섯 개의 RFID 이점 차원에 따라 31개의 속성으로 분류되었다. RFID 기술과 그의 이점에 대해 소매업자들은 이 기술이 현존하는 유통 공급망 체계를 보다 신속, 효과적으로 만들 것으로 인식하고 있었다. 그러나 실제 이 기술에 대한 채택은 아직까지 소수의 혁신적 기업만이 시도하는 초기 채택단계 이전에 머무르고 있었다. 한편 의류 소매업자들이 인식한 중요한 RFID 이점은 다섯 차원, 즉 (1) 물류 및 재고관리의 가시성과 가속성, (2) 수익률 향상, (3)고객 서비스, (4) 보안성, (5) 고용생산성으로 밝혀졌다. 이러한 결과는 RFID가 신속하고 효율적인 유통 공급망의 관리, 매장 운영 및 관리의 개선, 그리고 고객서비스 강화에 중요한 잠재력을 지닌다고 제시한 선행연구들의 이론적 가설 및 제언을 지지하였다. 따라서 본 연구는 의류소매업에서 RFID 기술에 대한 학문적 연구 및 실무적 접근 방향을 위한 기초자료를 제시하고 있다.2%, Bacillus cereus가 0.0%에서 29.4%, Clostridium perfringens는 0.0%에서 23.1%, Escherichia coli는 0.0%에서 35.0%로 검출되었다. Escherichia coli O157:H7, Salmonella spp., Vibrio parahaemolyticus, Listeria monocytogenes, Yersinia enterocolitica, Campylobacter jejuni는 검출되지 않았다. 이 연구는 신선한 야채에서의 병원체에 대한 기초 자료로 활용 가능할 것이라 기대된다.m}1.82$로서 명도와 황색도가 다소 낮게 나타났다. 청국장은 각각 $35.62{\pm}2.05,\;6.31{\pm}0.37$ 및 $13.50{\pm}0.78$로 나타나 명도와 황색도에 있어서 다소 낮게 나타났다.m25$에 9.4%를 나타내었다. 신체발달점수에서 남대생은 68.3%가 $75\sim85$이었고, 86 이상이 25.3%로 나타난 반면, 여대생은 표준범위가 63.6%의 분포를 나타내었다. 여대생의 나트륨 섭취는 연령과 0.082의 유의성을 나타내었고, 남대생의 복부 지방률은 연령과 0.011의 유의적 차이를 나타내었으며, 여대생의 체단백질랑은 나트륨섭취와 -0.276의 음의 상관관계를 나타내었다. 따라서 본 조사에 의하면 탄수화물:단백질:지방 비율이 $46\sim54:16\sim17:30$ 이상의 수준이었고, 섬유소는 권장량의 20%, 칼슘은 권장량의 $77\sim83%$, 나트륨은 권장량의 $2\sim3$배를 섭취하였는데, 이러한 섭취경향은 체성분에서 특히 남대생 94%가 체단백질량이 표준이상인 반면 남대생 86.4%가 체무기질량이 표준이하를 나타내었으며,

• 한국지반공학회논문집
• /
• 제36권2호
• /
• pp.5-15
• /
• 2020

포항지진(M_L=5.4) 시 발생한 액상화 현상은 국민들에게 지진으로 유발되는 액상화의 위험성을 새롭게 각인시켰고, 이에 대한 대비책으로 액상화 위험지도의 관심이 높아지고 있다. 현재 행정안전부가 보유하고 있는 액상화 위험지도는 2014년 제작된 것으로 전국 100,000개 이상의 시추 자료를 토대로 지하수위 0m인 조건으로 지반조건별 증폭계수를 사용하였으며 시추정보가 없는 지역은 보간법을 이용하여 2km × 2km 격자형식으로 제작된 것이 특징이다. 이러한 가운데, 2018년 행정안전부는 내진설계 공통기준의 새로운 지반분류법과 증폭계수를 공표하였다. 따라서 개정된 행정안전부의 증폭계수를 반영한 액상화 위험지도의 재작성이 필요하다. 본 연구는 내진설계 공통기준 개정 전·후 두 개의 기준으로 전 국토를 대상으로 지반분류를 수행하여 변동성을 분석하였으며, 지반조건별 증폭계수를 적용한 액상화 평가결과를 부산시 강서구를 대상으로 수행하였다. 이때 재현주기 500년과 1,000년에 해당하는 지반가속도를 적용하였으며 우리나라 평균 지하수위인 5m와 극한 조건인 0m로 구분하여 액상화 위험도를 평가하였다. 액상화 위험지도는 기존의 2km × 2km보다 높은 해상도를 확보하기 위해 500m × 500m 격자를 생성하여 위험지도를 작성하였다. 연구결과, 기존 지반분류 기준을 통해 S_C, S_D 지반으로 분류되었던 지반상태가 개정된 지반분류 기준을 통해 S₂, S₃, S₄로 재분류되었다. 재현주기 500년과 1,000년으로 액상화 평가를 수행한 결과 개정 전 지반증폭계수 적용한 LPI가 상대적으로 과대평가되는 결과를 도출하였다. 본 연구결과는 증폭계수를 이용하는 광역지역 액상화 위험지도 작성의 근간인 액상화 평가에 큰 영향을 미치는 요소로써 향후 광역지역 액상화 위험지도 작성의 경우 반드시 고려될 사항으로 판단된다

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Clinical and Experimental Pediatrics
• /
• 제50권7호
• /
• pp.678-685
• /
• 2007

목 적 : 조기사춘기 여아에게 성선자극호르몬 방출호르몬 효능약제(gonadotropin releasing hormone analogue, GnRHa)와 성장호르몬(growth hormone, GH)의 병합치료를 시행하여 성인신장획득에 대한 효과를 알아보고자 하였다. 방 법 : 2001년 1월부터 2004년 1월까지 조기사춘기로 소아과 외래를 내원한 여아 중 예측성인신장이 -2 표준편차점수 이하로 표적키보다 훨씬 작은 23명($9.73{\pm}1.59$세)을 대상으로 초경을 시작하지 않은 군(Group 1, n=19, $9.59{\pm}1.59$세)과 초경을 시작한 군(Group 2, n=4, $10.38{\pm}1.44$세)으로 나누어 GnRHa와 GH의 병합치료를 시행하고, 치료 시작 전후 및 두 군 간의 역연령, 골연령, 성장속도, 신장, 예측성인신장, 혈청 IGF-1, IGFBP-3 치, BMI를 비교 분석하였다. 결 과 : 치료 시작 시의 두 군의 역연령, 성장속도, BMI는 유의한 차이는 없었으나 골연령 및 골연령과 역연령의 차이는 Group 2에서 Group 1보다 유의하게 증가되어 있었다. 신장은 Group 1의 평균이 $130.7{\pm}7.4cm$, Group 2의 평균이 $140.7{\pm}6.0cm$으로 유의하게 차이가 있었으나 표적키, 예측성인신장, 혈청 IGF-1과 IGFBP-3은 유의한 차이가 없었다. 치료 종료 시의 Group 1의 골연령은 평균 $12.18{\pm}1.02$세, Group 2의 골연령은 평균 $13.56{\pm}0.83$세로 치료 시작 전과 마찬가지로 Group 2에서 유의하게 높았으나, 골연령과 역연령의 차이, 신장, 그리고 IGF-1은 차이가 없었다. 전체에서 골연령과 역연령의 차이가 치료 시작 전에 평균 $2.50{\pm}2.46$세, 치료 종료 후에 평균 $1.10{\pm}0.97$세로 감소되었고, 역연령에 대한 골연령의 비도 $1.22{\pm}0.16$에서 $1.10{\pm}0.10$으로 감소되어서 결국 골연령의 증가는 현저히 감소하였다. 성장 속도 역시 평균 $7.46{\pm}2.44cm$/년에서 $5.65{\pm}2.08cm$/년으로 감소하였다. 예측성인신장은 치료 전에 평균 $146.6{\pm}3.50cm$, 치료 후에 평균 $153.8{\pm}4.7cm$으로 현저히 증가하였으며 신장의 표준편차점수도 $-0.66{\pm}1.02$ SDS에서 $-0.34{\pm}1.04$ SDS로 유의하게 증가하였다. BMI는 치료 전 평균 $18.80{\pm}2.35kg/m^2$, 치료 후에 평균 $20.4{\pm}2.53kg/m^2$로 유의하게 증가하였고, 혈청 IGF-1은 치료 후에 유의하게 증가하였으나 IGFBP-3는 유의한 변화가 없었다. 치료 전후에 두 군에서 각 성장 변수의 변화를 보면 골연령과 역연령의 차이는 유의하게 감소하였고 신장, 예측성인신장, BMI는 유의하게 증가하였다. 그러나 혈청 IGF-1의 경우, Group 1에서는 치료 후에 현저히 증가하였으나 Group 2에서는 별 차이가 없었다. 혈청 IGFBP-3는 모두에서 유의한 차이가 없었다. 결 론 : 조기사춘기 여아에게 GnRHa와 GH의 병합치료를 시행했을 때, 골연령의 증가 속도와 성장속도가 감소하고, 혈청 IGF-1이 증가함으로써 예측성인신장이 의미 있게 증가하며 표적키에 가깝게 증가한다. 또한 IGF-1의 변화를 보면 초경을 시작하지 않은 조기사춘기 여아가 초경을 시작한 경우보다 성장획득에 대한 가능성이 더 클 것으로 생각된다.

• 수산해양기술연구
• /
• 제21권2호
• /
• pp.131-136
• /
• 1985

코너에서의 특이점이 weak 표면 특이점이라면, 반잠수 반원에 대한 Neumann-Kelvin 문제는 코너에서 속도가 유계인 한 개의 최소특이해를 가진다. 그러나 왜 유계인 조건이 코너에서 부과되어야 하는가 하는 명백한 물리적 이유는 없다. 코너는 정체점이 되고 여기서 섭동속도는 전진속도와 같다. 그리고 코너에서의 선형화는 타당하지 않다. 그러나 우리는 이러한 것을 무시하고 코너에서 이 점을 가져야만 한다고 제안한다. 따라서 이것이 코너에서 약하거나 강한 특이점을 가지는 섭동방정식의 해를 찾기 위한 적당한 이유이다. 그러나 어떤 특이점이 적당한가를 결정하는 명확한 방법은 없다. Ursell은 그의 연구에서 (19)식의 p와 q를 0으로 두어 유일해를 결정하기도 하였다. Suzuki는 자유표면에 대하여 에너지 보존을 취하여 유일해를 확정시키는 부가적인 조건을 제시하기도 하였다. G (ξ,η;x, y)는 y>0일 때 (x, y)에서 소스를 나타내며, 실제로 G (ξ,η;a, 0)는 weak 표면특이점이다. 최소특이해에 대한 표현은 (11)로부터 추론할 수 있고 각각의 코너에서 불연속 weak 표면특이점과 함께 소스의 연속적인 분포로 구성된다. Maruo는 세장체 이론의 적응으로부터 유도된 근사방법을 소개하였는데 이것은 Neumann-Kelvin 문제의 Kernel 함수에 대한 근사와 기본적으로 같다. 비록 왜 최소특이해가 2차원에서 택해져야 하는가에 대한 명확한 물리적인 이유는 없더라 해도, 어떻게 상응하는 유계조건을 3차원에도 적용할 수 있는가 하는 것이 최근 연구과제 중의 하나다. Ursell의 연구에 의한 경험은 앞으로 완전한 비점성 3차원 문제의 취급에 사용될 것이고, Maruo의 세장선 근사와는 다른 방법으로 3차원 Neumann-Kelvin 문제를 해석할 수 있을 것이다.의 수는 오히려 약간 증가하는 것으로 보이며, 고농도처리시 이들 값이 다시 감소하는 것은 Chain들의 운동이 급격해지면서 일부 비정 chain들이 절단되어서 결과적으로 T.M. 및 T.T.M.의 수는 오히려 약간 증가하는 것으로 보이며, 고농도처리시 이들 값이 다시 감소하는 것은 Chain들의 운동이 급격해지면서 일부 비정 Chain들이 절단되어서 결과적으로 T.M. 및 T.T.M.의 수가 감소하기 때문이라 생각되었다.각되었다.n 4 cases by ultrasonography. And ultrasonography could not reveal collaterals, arteriovenous shunt and thread and streaks sign.순에 최대 밀도를 나타내였고, 10월 중순 부터는 채집할 수 없음을 알았다.위분지 이상에서 3％로 자엽절 2분지의 비중이 특히 컸다.스 접종 8일 후의 중장원동세포내에서 A형 및 B형 봉입체가 형성되었음을 확인하였다. 10. FV감염 중장조직세포의 전자현미경 관찰에서는 바이러스 접종 5일 후에 배상세포의 'cytoplasmic wall'이 비대해지고 그 내부에 virus-specific vesicle이 형성되었으며, 바이러스 접종 8일 후에는 virus-specific vesicle, 바이러스 입자, linear structure, tubular structure 및 전자밀도가 높은 matrix 등의 바이러스 감염에 대한 특이적인 구조물이 배상세포의 세포질에서 관찰되었으며, microvilli내에서 바이러스 입자의 존재도 확정되었다. 특히 virus-specific vesicle 주위에서는 전자밀도가 높은 구형의 바이러스 입자 유사체가 관찰되었는데, 이것은 virus-specific vesicle 주위에서 바이러스 조립이 일어나는 것을 추정된다

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.418-425
• /
• 2013

고정층 반응기를 사용하여 상압에서 에탄올로부터 방향족화합물 제조에 관한 ZSM-5 제올라이트의 금속성분 및 실리카/알루미나 비의 영향을 고찰하였으며, 반응온도, 중량공간속도(WHSV), 반응물인 에탄올에 물 및 메탄올 첨가 영향도 검토하였다. 촉매로는 Si/$Al_2$ 비율이 23~280 범위의 상용 ZSM-5에 Zn, La, Cu, Ga 성분을 함침시켜 촉매 활성 및 안전성 테스트에 사용하였다. 촉매의 특성분석을 위해 암모니아 승온탈착 실험($NH_3$-TPD)과 질소 흡-탈착실험을 수행하였다. 실험결과, 방향족화합물의 선택도에 관한 ZSM-5에 함침한 금속성분과 ZSM-5의 Si/$Al_2$비에 크게 영향을 받았는데, 함침금속은 Zn-La > Zn > La > Cu > Ga 순으로 감소하였으며, ZSM-5의 적절한 산점을 가진 Si/$Al_2$=50, 80에서 가장 우수하였다. 최적 반응온도($437^{\circ}C$)와 공간속도($0.8h^{-1}$)에서 방향족화합물의 선택도는 초기 72%에서 30시간 이후 56%로 서서히 감소하는 경향을 나타내었다.

• 지구물리와물리탐사
• /
• 제11권2호
• /
• pp.127-136
• /
• 2008

울릉분지에서 가스하이드레이트 부존 유망지역 파악을 위하여 2005년과 2006년에 탐해2호를 사용하여 2차원 및 3차원 탄성파 탐사를 수행하였다. 탐사장비는 항측시스템, 기록시스템, 스트리머 케이블, 음원 등으로 구성되었다. 주로 1,000 m 이상의 대수심 환경 및 해저면 하부 500 msec 구간에서의 속도분석의 신뢰도를 고려하여, 3 km 길이의 스트리머와 1,035 $in^3$ 용량의 동조 에어건 음원을 사용하였다. 현장탐사자료취득과정에서 음원파형분석, 2차원 저급중합, RMS 잡음 분석, 주파수-파수 스펙트럼 분석 등의 일련의 품질관리를 수행하였다. 음원의 품질기준 적합성을 검토하기 위하여 음원파형을 계산하고, 건제거시험을 통하여 에어건 고장시의 음원파형변화를 확인하였다. 실시간 품질 분석을 통하여 일부 탄성파 자료에서 너울잡음, 패러티 오류, 스파이크 잡음 및 조목잡음 등을 확인할 수 있었지만, 탐사자료의 품질이 전반적으로 양호함을 확인할 수 있었다. 특히 3차원 탐사 시 불가피한 현장상황에 의해 조목잡음의 영향을 받은 탐사자료에 대해 FK 필터링 및 누락 트레이스 복원 기법을 적용한 품질향상 결과를 제시함으로써 취득자료의 적합 판정 및 현장 탐사 지속이 결정될 수 있었다. 탐사자료가 품질기준을 벗어나는 탐사해역에서도 현장자료처리를 통하여 잡음제거 가능성을 제시함으로써 해양탄성파탐사의 효율성을 높일 수 있다.

• 한국응용과학기술학회지
• /
• 제36권3호
• /
• pp.942-953
• /
• 2019

본 연구는 L-arginine 섭취가 고강도 훈련 프로그램에 따른 카누선수의 근 손상 지표, 피로 물질 및 경기력 향상에 미치는 영향을 확인하는데 목적이 있다. 이를 위해 고등학교 카누 선수 7명을 대상으로 고강도 훈련 프로그램을 적용하였으며, 고강도 훈련 프로그램은 주 2회의 유산소 운동(화, 목), 주 3회의 무산소 운동(월, 수, 금) 그리고 주 5회의 유연성 운동을 실시하였다. 고강도 훈련 프로그램을 진행하는 6주 과정 중에 처음 2주는 약물섭취(L-arginine or 위약)를 실시하고 다음 2주는 wash out, 그리고 마지막 2주도 약물섭취(L-arginine or 위약)를 실시하였다. 모든 연구대상자들이 L-arginine 섭취(시험군)와 위약그룹(대조군)으로 배정되는 교차설계로 디자인하였다. L-arginine은 하루 총 3g으로 섭취하였다. 채혈을 통해 L-arginine 섭취에 따른 근 손상 지표, 피로 지표, 항산화력을 확인하였으며, 혈관내피세포기능 분석을 위해 FMD, 그리고 카누 에르고미터를 활용하여 카누 경기력을 분석하였다. 본 연구결과 L-arginine 섭취에 따른 Ammonia, IP, CK의 수준의 직접적인 효과는 나타나지 않았으며, LDH의 수준은 L-arginine 섭취로 인해 PLA 그룹보다 ARG 그룹에서 더 감소하는 것으로 나타났다. L-arginine 섭취에 따른 Total NO, d-ROMs, BAP, 그리고 FMD의 수준도 통계적으로 유의한 차이는 없는 것으로 나타났다. 마지막으로 카누 경기력 향상을 확인하기 위해 실시한 500M 카누 에르고미터 결과에서 총시간, 스트록 거리, 평균속도 분석에서 L-arginine의 운동수행능력 향상의 직접적인 효과는 나타나지 않았다. 하지만 L-arginine 섭취로 인해 근 손상 지표, 피로 지표, 항산화력, FMD, 그리고 카누 경기력 수준이 개선되는 경향은 나타났다. 따라서 L-arginine 섭취의 잠재적인 운동능력 향상 보조제 효과에 대한 추가적인 연구가 필요할 것으로 생각된다.

• 헤리티지:역사와 과학
• /
• 제53권4호
• /
• pp.78-99
• /
• 2020

천안 성불사 마애불은 16나한이 모두 남아있는 국내의 유일한 예로 학술적 가치가 아주 높으나 심하게 손상되어 있어, 보존 방안을 검토하기 위해 디지털 기록화와 정밀 진단을 바탕으로 안정성을 평가하였다. 이 결과, 삼존불은 비슷한 규모이나 나한상은 매우 다양한 크기를 보였으며, 권속 2구는 나한상에 비해 크다. 추정공양상은 나한상과 유사하며, 대부분의 존상은 형상과 제작기법이 잘 드러난다. 마애불이 새겨진 암반은 편리 구조가 뚜렷한 호상편마암으로, 석영과 장석으로 이루어진 우백대와 흑운모로 구성된 우흑대가 교호하며 미량의 백운모를 포함한다. 이 마애불에는 물리적 풍화와 변색 및 생물 오염이 복합적으로 작용하고 있으며, 주암면에는 미세 균열 1,131cm, 박리상 균열 1,061cm, 구조상 균열 1,456cm, 절리 1,277cm로 나타났다. 손상도 평가 결과, 절리 3.6(균열지수), 박리 5.2%, 박락 1.7%, 탈락 0.1%로 산출되었다. 특히 생물학적 풍화가 심하여 주암면의 생물피도는 9단계와 10단계가 전체 면적의 57.5%를 차지하였고, 5~8단계도 22.3%로 아주 높았다. 표면 변색 요인은 Fe과 Ca 및 S로 암갈색과 백색으로 나타나고 흑화 오염물에서는 다량의 C가 검출되며, 모든 영역에서 손상 가중치가 매우 높다. 마애불 암반에서는 서로 다른 방향을 갖는 불연속면이 확인되었다. 암반의 파괴유형 분석 결과, 평면 파괴와 전도 파괴의 가능성이 있으며 쐐기 파괴는 발생하기 어려운 것으로 나타났다. 주암면의 초음파 속도는 평균 2,463m/s이며, 절리대가 많은 좌측면 하부가 상대적으로 낮아 상당히 풍화된 단계(HW)와 완전히 풍화된 단계(CW)가 집중 분포하는 취약한 물성을 보였다. 이 마애불에서는 미세 균열의 14.9%와 박리상 균열의 58.9% 정도에서 보존처리가 요구된다. 또한 마애불의 보존 환경을 개선할 수 있는 수목 정비와 암반의 구배를 고려한 배수 시설 및 지반 정비가 필요하며, 장기적인 보존 관리를 위해 보호 시설도 검토해야 할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.