• Journal of Ship and Ocean Technology
• /
• 제12권1호
• /
• pp.1-15
• /
• 2008

An edgetone is the discrete tone or narrow-band sound produced by an oscillating free shear layer, impinging on a rigid surface. In this paper, 2-dimensional edgetone to predict the frequency characteristics of the discrete oscillations of a jet-edge feedback cycle is presented using lattice Boltmznan model with 21 bits, which is introduced a flexible specific heat ratio y to simulate diatomic gases like air. The blown jet is given a parabolic inflow profile for the velocity, and the edges consist of wedges with angle 20 degree (for symmetric wedge) and 23 degree (for inclined wedge), respectively. At a stand-off distance w, the edge is inserted along the centerline of the jet, and a sinuous instability wave with real frequency is assumed to be created in the vicinity of the nozzle exit and to propagate towards the downward. Present results presented have shown in capturing small pressure fluctuating resulting from periodic oscillation of the jet around the edge. The pressure fluctuations propagate with the speed of sound. Their interaction with the wedge produces an irrotational feedback field which, near the nozzle exit, is a periodic transverse flow producing the singularities at the nozzle lips. It is found that, as the numerical example, satisfactory simulation results on the edgetone can be obtained for the complex flow-edge interaction mechanism, demonstrating the capability of the lattice Boltzmann model with flexible specific heat ratio to predict flow-induced noises in the ventilating systems of ship.

• 한국음향학회지
• /
• 제15권4호
• /
• pp.105-112
• /
• 1996

고온 고압의 액체 로켓 엔진 연소실 설계에서 연소 불안정 현상은 항상 큰 문제로 인식되어 왔다. 이 문제의 근본적인 원인은 연소로 인한 급격한 열 방출에 기인하며 연소 과정에서 생기는 아주 작은 소음이 연소실 내의 음향모드와 상이 일치하면서 연소실 내의 압력이 급격히 높아져 엔진의 파손까지도 가져오게 한다. 본 연구는 이러한 연소 불안정 현상을 제거하기 위해 사용되는 안정화 장치로서 배플이 어떻게 로켓 연소실의 안정화에 도움을 주는가에 대한 이론적인 배경을 제공하는데 그 주안점을 두어 베플이 부착된 연소실에 대하여 음향해석을 행하여 배플을 사용함으로 인한 여러 가지 특이한 효과들이 연소 불안정 현상을 제거하는 중요한 메카니즘으로 작용함을 밝혀 내었다. 이중 대표적인 것으로는 첫째, 배플 격실내에서 횡모드 음향파가 종모드화되는 경향이며, 둘째, 연료 분사면 주위에서 불안정 유동이 극히 억제되는 현상과, 셋째로 연소실 내의 정상모드 진동수가 감소되는 현상등이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.14-17
• /
• 2010

7개 스월 인젝터 연소기의 스월 방향에 따른 유동 특성을 파악하기 위하여 3차원 Large Eddy Simulation(LES)을 수행하였다. 해석에 이용된 연소기 모델은 Georgia 공대 Aerospace Combustion Laboratory의 LRE combustor를 이용하였으며, 경계 조건은 실험에서 얻어진 값을 적용하였다. 7개 인젝터의 스월 방향을 모두 동일한 방향으로 설정하였을 경우, 스월 유동간의 간섭이 증가하게 되고, 연소실 벽면에서 강한 원주방향의 속도 분포가 형성되는 것을 관찰하였다. 또한 연소실 내 압력변동폭은 인젝터의 스월 방향을 상반되게 설정하였을 때보다 현저히 증가한 것을 확인하였다.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.560-568
• /
• 2011

In SPH(Smoothed Particle Hydrodynamics) method, the fluid has been assumed that it is weakly compressible to solve the basic equations composed of Navier-Stokes equations and continuity equation. That leads to some drawbacks such as non-physical pressure fluctuations and a restriction as like small time steps in computation. In this study, to improve these problems we assume that the fluid is incompressible and the velocity-pressure coupling problem is solved by a projection method(that is, by ISPH method). The two-dimensional computation results of dam breaking and gravitational wave generation are respectively compared with the results of finite volume method and analytical method to confirm the accuracy of the present numerical computation technique. And, the agreements are comparatively acceptable. Subsequently, the green water simulations of a two-dimensional fixed barge are carried out to inspect the possibility of practical application to ship hydrodynamics, those correspond to one of the violent free surface motions with impact loads. The agreement between the experimental data and the present computational results is also comparatively good.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.27-35
• /
• 2002

In laser materials processing, localized heating, melting and evaporation caused by focused laser radiation forms a vapor on the material surface. The plume is generally an unstable entity, fluctuating according to its own dynamics. The beam is refracted and absorbed as it traverses the plume, thus modifying its power density on the surface of the condensed phases. This modifies material evaporation and optical properties of the plume. A laser-produced plasma plume simulation is completed using axisymmetric, high-temperature gas dynamic model including the laser radiation power absorption, refraction, and reflection. The physical properties and velocity profiles are verified using the published experimental and numerical results. The simulation results provide the effect of plasma plume fluctuations on the laser power density and quantitative beam radius changes on the material surface. It is proved that beam absorption, reflection and defocusing effects through the plume are essential to obtain appropriate mathematical simulation results. It is also found that absorption of the beam in the plume has much less direct effect on the beam power density at the material surface than defocusing does and helium gas is more efficient in reducing the beam refraction and absorption effect compared to argon gas for common laser materials processing.

• 한국연소학회지
• /
• 제9권3호
• /
• pp.10-18
• /
• 2004

An experimental study of the effect of operating conditions on the behavior of a lean premixed laboratory combustor operating on natural gas has been conducted. Measurements were made characterizing the pressure fluctuations in the combustor and the flame structure over a range of inlet temperatures, inlet velocities and equivalence ratios. In addition the fuel distribution at the inlet to the combustor was varied such that it was an independent parameter in the experiment. Inlet temperature, inlet velocity and equivalence ratio were all found to have an effect on the stability characteristics of the combustor. The nature of this effect, however, depended on the fuel distribution. For example, with one fuel distribution the combustor would become unstable when the temperature was increased, whereas with a different fuel distribution the combustor would become unstable when the temperature was decreased. Similarly, the operating conditions had an effect on the flame structure. For example the intensity-weighted center of mass of the flame was found to move closer to the center body as either the temperature or equivalence ratio increased. It was interesting and somewhat surprising to note, however, that as the location of the center of mass changed with operating conditions it did so by moving along a line of constant flame angle.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.869-877
• /
• 2016

Necessity has compelled man to improve upon the art of tapping wind energy for power generation; an apt reliever of strain exerted on the non-renewable fossil fuel. The power generation in a Wind Farm (WF) depends on site and wind velocity which varies with time and season which in turn determine wind power modeling. It implies, the development of an accurate wind speed model to predict wind power fluctuations at a particular site is significant. In this paper, Box-Jenkins ARIMA (Auto Regressive Integrated Moving Average) time series model for wind speed is developed for a 99MW wind farm in the southern region of India. Because of the uncertainty in wind power developed, the economic viability and reliability of power generation is significant. Life Cycle Costing (LCC) method is used to determine the economic viability of WF generated power. Reliability models of WF are developed with the help of load curve of the utility grid and Capacity Outage Probability Table (COPT). ARIMA wind speed model is used for developing COPT. The values of annual reliability indices and variations of risk index of the WF with system peak load are calculated. Such reliability models of large WF can be used in generation system planning.

• Wind and Structures
• /
• 제27권6호
• /
• pp.417-430
• /
• 2018

The concentration fields in the proximities of a local gas emission source are experimentally analyzed in several combinations of wind incidences and source emissions. These conditions are determined by the plume buoyancy, emission velocity and incident flow wind speed. Concentration measurements are performed by an aspirating probe in a boundary layer wind tunnel. The analysis included the mean concentration values and the intensity of concentration fluctuations in a neutral atmospheric boundary layer flow. Different configurations are tested: an isolated stack in a homogeneous terrain and a stack with a bluff body in close proximity, located windward and leeward from the emission source. The experimental mean concentration values are contrasted with Gaussian profiles and the dilution factor is analyzed with respect to the empirical curves of the minimum dilution. Finally, a study on the plume intermittency is performed in a cross-sectional plane near the emission source. It is possible to highlight the following observations: a) plume vertical asymmetry in the case of an isolated emission source, b) significant differences in the dispersion process related to the relative location of the emission source and bluff body effects, and c) different probabilistic behavior of the concentration fluctuation data in a cross-sectional measurement plane inside the plume.

• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.26-31
• /
• 2021

The spanwise growth of turbulence structures in turbulent pipe flow was investigated using the direct numerical simulation data of Re_𝜏 = 544, 934 and 3008. Two-point correlations and pre-multiplied energy spectra of streamwise velocity fluctuations were examined along the spanwise direction. The arclength direction is defined as r𝛳, which is useful for an analogy with the spanwise direction for channels or boundary layers; here, r and 𝛳 are the radial distance from the core and the azimuthal angles, respectively. Both analyses showed that the arclength scales increased with increasing the wall-normal distance. It showed that the coherent structures were confined in the core region due to the crowding effect of a circular pipe geometry. The pipe flow simulation could describe a realistic geometrical flow along the azimuthal direction, unlike the simulations of turbulent channel or boundary layer flow using periodic boundary conditions along the spanwise direction. The present results provided the spanwise organization of energy-containing motions over a broad range of scales in turbulent pipe flow.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.130-130
• /
• 2023

제트류는 다양한 크기와 운동량의 에디가 복잡하게 혼합되어 이루어져 있으며, 이를 정확하게 모델링하고 이해하기 위해서는 제트류의 다양한 특성들을 잘 반영하여 연구를 수행해야 한다. 다양한 연구 수행 방법 중 수치해석 방법은 상대적으로 공간 및 시간적 비용이 적게 들어서 널리 사용되고 있다. 이러한 수치해석 방법에는 DNS(Direct Numerical Simulation), LES(Large Eddy Simulation), RANS(Reynolds Averaged Navier Stokes) 등이 있으며, 그중 LES는 난류 모델링을 사용하는 RANS 방법에 비해 더욱 정확한 흐름 모델링을 제공하는 장점이 있다. 이러한 LES는 대규모 에디는 직접 해석하면서, 일정 크기 이하의 에디는 모델링을 사용해 해석하는 것이 특징이다. 하지만, LES를 사용하기 위해서는 적절한 그리드 크기를 결정하는 것이 중요하며, 이는 모델의 정확성과 연산 비용에 큰 영향을 미친다. 하지만, 여전히 적절한 그리드 크기를 결정하는 것은 어려운 문제이다. 이러한 LES 모델링을 사용할 때 적절한 그리드 크기를 결정하기 위해서는 정확한 시간 평균 속도 변동을 연구하는 것이 앞서 선행되어야 한다. 따라서, 본 연구에서는 기계학습 기반 접근 방식을 사용하여 난류 제트 내 시간 평균 속도 변동을 예측하는 연구를 진행하였다. 즉, 난류 제트 역학을 이해하는 데 중요한 파라미터인 시간 평균 유속을 이용하여 시간 평균 속도 변동을 예측하는 데 초점을 맞추었다. 모델의 성능은 평균 제곱 오차와 R-제곱 등 다양한 지표를 사용하여 평가되었다.