• 한국지반공학회논문집
• /
• 제22권12호
• /
• pp.67-76
• /
• 2006

준설 매립된 연약지반이나 해성 점토의 전단강성 평가는 시료 교란의 영향으로 많은 어려움이 있다. 본 연구는 기존의 현장 전단파 시험들의 몇가지 제약 조건을 극복한 새로운 현장 전단파 시험 장치를 개발하고 적용성에 대하여 기술한 것이다. 장치 설계 고려사항은 교란효과, 트랜서듀서 간의 전기적 간섭, 케이블 사이의 전자기 커플링, 자체음향 차단, 전단파의 이동 간격 유지, 트랜서듀서의 회전, 프레임(frame)을 통한 파의 직접적 전달, 그리고 트랜서듀서와 케이블의 보호를 포함한다. 이들 고려사항은 현장과 실내실험을 통하여 지속적으로 개선되었다. 현장 전단파 속도는, 어떠한 역산기법 없이, 전단파의 이동거리와 이동시간으로부터 직접 계산되었다 개발된 현장 전단파 프로브는 깊이 30m까지 적용되었다. 실험결과 현장 전단파 프로브를 이용하여 모래와 점토지반에서 매우 세밀한 전단파 프로파일을 산정할 수 있었다. 또한 실험부지에서 수행된 콘관입실험결과와도 좋은 상관관계를 나타내었다. 본 논문에서 제시된 현장 전단파 프로브는 연약지반의 동적 특성 평가를 위한 현장 전단파 속도 측정에 매우 효과적인 장치임 보여준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.108.5-108
• /
• 2001

The research of friction compensation control system seeks the accuracy, the velocity increase of the table, and the settling time reduction. The friction is the disturbance which has the greatest influence, but the past research of control system doesn´t perform exact modeling of the friction. So this research aims at the friction compensation control system, the exact modeling of the friction, comparison between the model simulation and experimental data, and the design of observer for the friction estimation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.442-445
• /
• 1991

In the physical system, if we can precisely control an acceleration and force, we can improve the performance of their integral values, velocity and position. From this point of view, in this paper we try to use an obverser which is constructed by using Variable Structure System for estimating the acceleration in the system with the bounded unknown disturbance and the parameter mismatching. To obtain the robust control performance, the VSS with sliding mode is adopted in the design of the servo controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.192-197
• /
• 1992

The position error in multi-axis machine tools are due to many elements, such as the static friction, servo lag, a nonlinear disturbance, the gain mismatch between multi-axis controllers. In the work, modeling for the plant was carried out through the velocity response by the step input signal. Digital PI controllers, LQ optimal controllers and feedforward controllers are designed for a high tracking performance based on the model. The results of experimentation showed that the controllers worked properly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.281-285
• /
• 1986

In this paper, the characteristics of disturbance torque of gimbal servo dynamics are studied, and the simulation methods of gimbal servo dynamics and INS error due to angular rate and linear acceleration of vehicle are proposed. In results of the simulation for a specific INS, it is estimated that INS velocity error due to gimbal servo dynamics is nearly proportional to square of vehicle acceleration.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.257-261
• /
• 2003

A free stream vortical disturbance generated by a single axial vortex of periodically modulated strength was used to investigate vortical receptivity of a flat plate boundary layer to low-frequency spatially localized free-stream disturbances. It was found that the boundary-layer response was dominated by stream-wise velocity perturbation (streak). However, in contrast to the stationary streaks considered by Boiko (2002), its intensity showed no pronounced growth along the flat plate.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.463-473
• /
• 1999

The main purpose of this study is to investigate the characteristics of precharge electro-cyclone compared to those of innercharge electro-cyclone, experimentally. Especially, the experiment is executed focusing on the improvement of collection efficiency with the charging types including the experimental parameters such as the discharge electrode shapes, applied voltages and gas inlet velocities. Results show that the overall collection efficiency of precharge electro-cyclone is increased over 20% than that of the innercharge type for the same discharge electrode(ø 4 mm, screw rod) in the inlet velocity of 4 m/s, and applied voltage of 30kV. Moreover, the pressure drop of precharge type becomes 10% lower than that of the innercharge type for the inlet velocity of 12 m/s owing to the disturbance of inner vortex flow by the discharge electrode equipped in the center region of cyclone body.

• 로봇학회논문지
• /
• 제15권1호
• /
• pp.77-89
• /
• 2020

This paper proposes a simple and intuitive model-free torque-tracking control for rotary electro-hydraulic actuators. The undesirable natural-velocity-feedback effect is discussed by introducing mechanical impedance into the electro-hydraulic actuation system. The proposed model-free torque control comprises inner- and outer-loop control to achieve two control objectives. Inner-loop control reduces the mechanical impedance passively and optimally. To improve the tracking accuracy, a certain form of proportional-integral-derivative control is applied to the outer loop. The robustness of the proposed closed-loop system against external disturbances is demonstrated by transforming the two-loop control structure into a disturbance observer form. The proposed method is validated on a single joint electro-hydraulic actuator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2423-2425
• /
• 2004

Mobility of an indoor wheeled robot is affected by adhesion force that is related to various floor conditions. When the adhesion force between driving wheels and the floor decreases suddenly, the robot has slip state. First of all, this paper models adhesion characteristics and slip in wheeled robot. Secondly, the paper proposes estimation method of adhesion force coefficient(AFC) according to slip velocity. In order to overcome this slip problem, optimal slip velocity must be decided for stable movement of wheeled robot. The paper proposes an anti-slip control system based on an ordinary disturbance observer, that is, the re-adhesion control is achieved by reducing the driving torque enough to give maximum adhesion force coefficient. fuzzy logic controller(FLC) is petty useful with slip through that compare fuzzy with PI control for the controller performance. These procedure is implemented using a Pioneer 2-DXE parameter.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.420-426
• /
• 1998

It is the purpose of this paper to make a preliminary study on the use of repetitive control to improve velocity accuracy by eliminating repetitive disturbances caused by machining inaccuracies of the axis of rotation location. If the control system can be intelligent enough to compensate for such machining errors, then one may be able to improve the accuracy of the velocity control, or alternatively, one may maintain the same accuracy and relax the machining tolerances required. This could decrease cost significantly. Experiments are performed testing repetitive control methods on a constant speed rolling operation testbed. The experimental results show very substantial decreases in the tracking error of the system. Spectral data of the output motion are given to demonstrate the attenuation of the disturbance frequencies and harmonics, related to the bandwidth being used. It is seen that the simplest form of repetitive control which is very easily implemented, can produce striking improvement in control system performance in such belt drive rolling operations, and the learning can be accomplished in a short time.