• 자원환경지질
• /
• 제30권5호
• /
• pp.469-476
• /
• 1997

In the conventional velocity analysis, the peaks of a semblance panel are picked and the stacking velocities of the peaks are assumed as RMS velocities from which interval velocities are determined. This velocity analysis technique is correct only for horizontal homogeneous layes and incurs error in a layer whose velocity varies laterally. Tediousness of peak picking and error in velocity analysis can be reduced by automatic velocity analysis techniques. An automatic velocity analysis algorithm has been presented in order to improve these problems by considering the stacking velocity from the view point of interval velocity model and by relating the stacking velocity and the interval velocity with the traveltimes. In this paper, we apply the automatic velocity analysis method to simple models having lateral velocity anomaly to verify the effectivenesses and limits of this method. From the results of numerical experiments, we can determine the interval velocites without pickings of the stacking velocities in the one-dimensional velocity analysis and the general patterns of the laterally varying interval velocities appear in the two-dimensional case. However, the interval velocity and the depth of velocity anomaly determined by two-dimensional automatic velocity analysis are somewaht discrepant in those of the theoretical model.

• 지구물리와물리탐사
• /
• 제16권4호
• /
• pp.225-233
• /
• 2013

효율적이고 객관적인 NMO 속도분석을 위해 사용되는 자동 속도분석의 정확성은 속도 빛띠의 속도 해상도에 많은 영향을 받는다. 본 연구에서는 고해상도 BDS (high-resolution Bootstrapped Differential Semblance)를 이용하여 속도 빛띠를 구성하고, 이를 이용하여 공통 중간점 모음 별로 병렬적으로 자동 속도분석을 수행하는 모듈을 개발하였다. 또한 이 고해상도 BDS를 이용하는 자동 속도분석 모듈의 속도분석 결과를 BDS (Bootstrapped Differential Semblance)를 이용한 자동 속도분석의 결과와 비교하였다. 수평층을 포함한 속도모델로부터 얻은 합성 탄성파 탐사자료를 생성하고 이를 이용하여 개발된 모듈을 검증한 결과 본 연구를 통해 개발된 모듈이 좀 더 정확한 속도를 추정하는 것을 확인하였다. 또한 현장자료에 개발된 모듈을 적용하여 이벤트의 연속성이 향상된 공통 중간점 겹쌓기 단면을 구할 수 있는 NMO 속도를 추정하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.7-13
• /
• 1996

The kinematically admissible velocity field is developed for the analysis of extruded products. The curving of product in extrusion is caused by the linearly distributed longitudinal velocity on the cross-section of the workpiece at the die exit. In the analysis, the longitudinal velocity in extrusion direction is divided into the uniform velocity and the deviated velocity. In order to satisfy the requrement of the kinematically admissible velocity field, the average value of the deviated velocity should be zero. At the same time, it should linearly change with the distance form the center of gravity of the cross-section of the workpiece. The results of the analysis show that the curvature of product increses with increses in eccentricity of gravity center of the cross-section of workpiece at die entrance form that of the cross-section at the die exit. In the analysis, the longitudinal velocity in extrusion direction is divided into the uniform velocity and the deviated velocity. In order to satisfy the requrement of the kinematically admissible velocity field, the average value of the deviated velocity should be zero. At the same time, it should linearly change with the distance from the center of gravity of the cross-section of the workpiece. The results of the analysis show that the curvature of product increses with increses in ecentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.151-156
• /
• 2007

In December 2006, 2D surface streamer and Ocean Bottom Seismometer (OBS) data were acquired in the Ulleung basin in Korea where strong Bottom Simulating Reflectors (BSR) were shown as a result of 2D and 3D multichannel (MCS) reflection survey. The aim of this study is to provide another reliable source for estimating P wave velocity around BSR depth using OBS data in addition to velocity information from 2D surface seismic data. Four OBSs were deployed and four 20-km shot lines which pass two OBSs respectively were designed. To derive P wave velocity profile, interactive interval velocity analysis using ${\tau}$-p trajectory matching method (Kumar, 2005) was used for OBS data and semblance analysis was used for surface data. The seismic profiles cross the OBS instruments in two different directions yield recordings for four different azimuths. This raised the confidence for the results. All velocity profiles in the vicinity of BSR depth of four OBS sites show almost definite velocity changes which we could consider as upper BSR and free gas layer. Making comparison between velocity from OBS and that from 2D seismic semblance velocity analysis gives consistency in result.

• 소성∙가공
• /
• 제8권4호
• /
• pp.364-373
• /
• 1999

For material characterization of semi-solid materials, backward extrusion process, which has been used in forming of hollow-sectioned products, was analyzed by the upper bound analysis in the current study. The existing kinematically admissible velocity field was applied to steady state at which there was no change in the assumed regions of velocity field. For unsteady state, new velocity field, as a function of dead zone angle, was proposed. Through the whole analysis, fiction between die and workpiece was also considered. It has been studied how the process variables, such as friction factor and punch velocity, and material parameters, such as strength coefficient, strain rate sensitivity could affect on analysis results. Finally, by the comparison with the finite element analysis, the reliability and efficiency of the proposed velocity field were discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.210-213
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by axial distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increase with the die twisting angle and the aspect ratio of product and friction condition and reduction area and show that angular velocity increases with the decreases in die length.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.719-722
• /
• 2002

Cylindrical cam mechanisms are used commonly in many automatic machinery. But the cylindrical cam is very difficult to design and manufacture the shape. The motion analysis of the cylindrical cam can check the accuracy between designed data and manufactured data of the cam shape and can reproduce without the cam design data. The motion analysis of the cylindrical cam consists of displacement analysis, velocity analysis and acceleration analysis. This paper performs the motion analysis of a cylindrical cam with translating follower by using a relative velocity method and a central difference method. The displacement is calculated by using the central difference method and the velocity is calculated by the relative velocity method. The relative velocity method is defined by the relative motion between follower and cam at a center of a follower roller. The central difference method is derived in the 3 dimensional space.

• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.31-39
• /
• 2010

자동속도분석의 목적은 대용량 탄성파탐사자료로부터 정확한 속도를 효율적으로 추출하는 것이다. 본 연구에서는 bootstrapped differential semblance (BDS) 방법과 몬테카를로 역산법을 이용하여 효율적인 자동속도분석 알고리듬을 개발하였다. 자동속도분석을 통해 보다 정확한 결과를 계산하기 위하여 우리가 개발된 알고리듬에서는 일반적인 셈블런스보다 높은 속도해상도를 제공하는 BDS를 일관성 측정법으로 사용한다. 게다가, 개발된 자동속도분석 알고리듬의 처리시간을 줄이고, 효율성을 증가시키기 위해 조건적으로 초기속도모델을 결정하는 단계를 추가하였다. 그리고 잘못된 피크값을 피킹하는 문제를 방지하기 위해서 새로운 RMS 속도제약조건을 선택적으로 사용하였다. 개발된 자동속도분석 모듈의 성능을 시험하기 위해서 합성탄성파탐사자료와 동해에서 취득한 현장자료에 개발된 모듈을 적용하였다. 본 연구에서 개발원 알고리듬을 통해 얻은 속도결과를 적용하여 안든 중합단면들은 일관된 반사이벤트들과 NMO보정 결과의 질이 향상된 것을 보여준다. 더욱이, 개발원 알고리듬은 구간속도제약조건을 확인하면서 구간속도를 먼저 구하고 이를 이용하여 RMS 속도를 계산하기 예문에, 지질학적으로 타당한 구간속도를 구할 수 있다. 또한, 구간속도의 경계등이 중합단면도에서 나타나는 반사이벤트들과 잘 부합된다.

• 소성∙가공
• /
• 제7권4호
• /
• pp.340-346
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of the extruded products with elliptical shapes from round billet. The twisting of extruded product is caused by the lin-early increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product in creases with the die twisting angle, the aspect ratio of product the friction condition, the reduction of area, and decreases with the die length.

• 제어로봇시스템학회논문지
• /
• 제8권6호
• /
• pp.477-483
• /
• 2002

This paper deals with a workspace analysis of multi-legged walking robots in velocity domain(velocity workspace analysis). Noting that when robots are holding the same object in multiple cooperating robotic arm system the kinematic structure of the system is basically the same with that of a multi-legged walking robot standing on the ground, we invented a way ot applying the technique for multiple arm system to multi-legged walking robot. An important definition of reaction velocity is made and the bounds of velocities achievable by the moving body with multi-legs is derived from the given bounds on the capabilities of actuators of each legs through Jacobian matrix for given robot configuration. After some assumption of hard-foot-condition is adopted as a contact model between feet of robot and the ground, visualization process for the velocity workspace is proposed. Also, a series of application examples will be presented including continuous walking gaits as well as several different stationary posture of legged walking robots, which validate the usefulness of the proposed technique.